Opens in a new tab

TIP122G

NPN Darlington, 100V 5A, hFE 1000, TO-220, MCU-friendly

1550

Effective Inventory

Image for reference only

Manufacturer Part:

TIP122G

Package:

TO-220AB (15.75 x 10.1 x 4.45mm, through-hole, tab=Collector)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TIP122G from onsemi is an NPN Darlington power transistor with 100V collector-emitter voltage, 5A continuous collector current, and hFE of 1000 minimum, enabling direct drive from microcontroller logic in a TO-220 package.

Key Specifications

Type NPN Darlington Power Transistor
Collector-Emitter Voltage (VCEO) 100V
Collector-Base Voltage (VCBO) 100V
Emitter-Base Voltage (VEBO) 5V
Collector Current (IC) 5A continuous; 8A peak
Base Current (IB) 120mA max
DC Current Gain (hFE) 1000 min @ IC=3A; 2500 typical @ IC=4A
VCE(sat) 2.0V max @ IC=3A; 4.0V max @ IC=5A
VBE(on) 2.5V max @ IC=3A
Power Dissipation 65W @ TC=25°C; 2W @ TA=25°C
Thermal Resistance (θJC) 1.92°C/W
Operating Temperature -65°C to +150°C
Package TO-220AB (through-hole, tab=Collector)

Features

  • Darlington configuration — hFE = 1000 minimum
  • 100V, 5A — medium-power switching
  • Low base current: only 5mA to drive 5A load
  • Built-in base-emitter shunt resistors for stability
  • Monolithic construction
  • Complementary PNP: TIP127G

Applications

  • Relay and solenoid driver
  • DC motor control
  • High-power LED driver
  • Heater control
  • Audio amplifier output stage
Product Introduction: TIP122G Product Introduction

The TIP122G from onsemi is an NPN Darlington power transistor containing two NPN transistors in a cascade (Darlington) configuration, plus built-in base-emitter shunt resistors for thermal stability. The Darlington connection multiplies the current gains of the two transistors: hFE(total) = hFE1 × hFE2, resulting in a minimum gain of 1000 and typical gain of 2500. This enormous gain means that only IB = IC/hFE = 5A/1000 = 5mA of base current is needed to drive a 5A load — well within the output capability of any microcontroller GPIO. The trade-off is a high saturation voltage: VCE(sat) can reach 4V at 5A, meaning 20W of power dissipation in the transistor at full load. This requires a substantial heatsink for continuous operation. The 100V rating makes the TIP122 suitable for 12V, 24V, and even 48V systems. The complementary PNP device is the TIP127G. The G suffix denotes the Pb-free TO-220 package.

Working Principle: TIP122G Working Principle

The TIP122G uses a Darlington pair: the collector of the first (input) transistor Q1 connects to the base of the second (output) transistor Q2, and both collectors tie together. When base current flows into Q1’s base, Q1 amplifies it by hFE1 and feeds it to Q2’s base. Q2 then amplifies this by hFE2. The total current gain is hFE1 × hFE2 ≈ 1000-2500. The built-in shunt resistors (8kΩ across Q1’s B-E and 120Ω across Q2’s B-E) provide a leakage current path to prevent the Darlington from turning on due to collector leakage at high temperature. Without these resistors, Q1’s collector leakage would be amplified by Q2, potentially causing thermal runaway. The saturation voltage is high (2-4V) because Q2’s collector-emitter voltage can never fall below Q1’s VCE(sat) + Q2’s VBE ≈ 0.3V + 0.7V = 1.0V, and the shunt resistors divert some base current. The VBE(on) is also high (2.5V) because it’s the sum of Q1’s VBE + Q2’s VBE ≈ 0.7V + 0.7V = 1.4V plus the drop across Q1’s collector load. For switching applications, the base drive must supply IB = IC/hFE(min) × 2 (overdrive) = IC/500. For a 3A load: IB = 6mA. The base resistor: RB = (Vdrive − VBE(on)) / IB = (5V − 2.5V) / 6mA ≈ 400Ω.

Pin Description: TIP122G Pin Definition and Functions
Pin Name Type Description
1 Base Input Base terminal controls the Darlington output. VBE(sat) is approximately 2.5V due to two series base-emitter junctions. Drive with IB > IC/hFE(min) where hFE(min) = 1000 at IC=3A. Base current of 5-20mA is typically sufficient for full saturation at collector currents up to 5A.
2 Collector Power Output Collector terminal connects to the load. Rated for 100V VCEO and 5A continuous collector current (8A peak). The tab of TO-220 is electrically connected to Collector. Power dissipation 65W at TC=25°C. VCE(sat) = 2.0V max at IC=3A due to Darlington configuration.
3 Emitter Output Emitter terminal. Connects to ground in common-emitter configuration. Internal freewheeling diode (base-emitter resistors and protection diode) provides reverse voltage protection. Built-in base-emitter shunt resistors improve thermal stability and turn-off speed.

TIP122G pin assignment (TO-220-3, front view, pins down): Pin 1 (left) = Base, Pin 2 (center) = Collector/Tab, Pin 3 (right) = Emitter. This is an NPN Darlington power transistor with minimum hFE of 1000, making it easy to drive from microcontroller GPIO. The tab is connected to Collector. Complementary PNP: TIP127G (-100V/-5A). For MOSFET alternative with lower VCE(sat), consider IRF540N (100V/33A logic-level MOSFET).

Application Scenarios: In which products and applications is TIP122G used
  • Motor Driver: MCU GPIO → 220Ω → TIP122 base; collector to 12V motor; emitter GND; flyback diode across motor; IB≈10mA drives IC=3A
  • Solenoid Control: 24V solenoid → TIP122 collector; emitter GND; IB=5mA from MCU; flyback diode essential
  • Heater Element: 12V/3A heater → TIP122 collector; PWM on base for temperature control; heatsink on TIP122
  • High-Power LED: 12V LED strip (2A) → TIP122 collector; PWM base drive for dimming; 4.7kΩ base resistor
  • Audio Amp: Push-pull with TIP122 (NPN) + TIP127 (PNP); Class-AB; ±24V rails; 5A peak output
Alternative Models: What chips are recommended as replacements for TIP122G
Model Manufacturer Key Difference Package Specs
TIP120G onsemi 60V version, same package, lower voltage – –
TIP121G onsemi 80V version, same package – –
TIP127G onsemi PNP complementary (100V), same package – –
BDW93C Various 100V/12A Darlington, higher current, TO-220 – –
IRF540NPBF Infineon MOSFET alternative, 100V/33A, lower VCE(sat), needs gate driver – –

TIP122G is an NPN Darlington transistor 100V/5A from onsemi in TO-220. The complementary PNP is TIP127G (-100V/-5A). The TIP120G (60V) and TIP121G (80V) offer lower voltage ratings at identical current. The TIP142G provides 100V/10A for higher current needs. The BD679A from ST offers 80V/4A Darlington in SOT-93 for surface-mount. For MOSFET alternatives, IRLZ44N provides logic-level 55V/47A N-channel switching. The FQP30N06L offers 60V/30A with 35mΩ RDS(on) for more efficient switching.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1