Opens in a new tab

TIP42C

PNP power transistor, -100V, -6A, 65W, TO-220, complement to TIP41C

5933

Effective Inventory

Image for reference only

Manufacturer Part:

TIP42C

Package:

TO-220

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TIP42C from onsemi is a PNP silicon power transistor rated at -100V and -6A. With hFE of 15-75 and 65W power dissipation in TO-220, it is the standard PNP power transistor for audio amplifiers and high-current switching, complement to the TIP41C NPN transistor.

Key Specifications

Type PNP Silicon Power BJT
VCEO -100V
IC (continuous) -6A
hFE 15-75 (at -300mA, -4V)
VCE(sat) -1.5V (max at -3A, -120mA base)
fT 3MHz (min)
Power Dissipation 65W (at TC=25C)
Package TO-220
Operating Temperature -65 to +150 C

Features

  • PNP complement to TIP41C
  • 100V collector-emitter voltage rating
  • 6A continuous collector current
  • 65W power dissipation in TO-220
  • Base-emitter voltage: -5V maximum
  • Industry-standard power transistor pinout

Applications

  • Push-pull audio amplifier output stages
  • High-current PNP switching
  • Power supply pass transistor
  • Motor H-bridge driver (with TIP41C)
Product Introduction: TIP42C Product Introduction

The TIP42C from onsemi is a PNP silicon power transistor in a TO-220 package rated at -100V and -6A continuous collector current. With 65W power dissipation, it is suitable for audio amplifier output stages and power switching applications. The hFE of 15-75 at -300mA indicates moderate gain, typical of power transistors; Darlington configurations or higher base drive current are needed for high-current switching. The TIP42C is the direct complement to the TIP41C NPN transistor, enabling push-pull amplifier and H-bridge motor driver circuits. The -100V rating provides adequate margin for split +/-40V audio amplifier supplies. For higher gain, the TIP142/TIP147 Darlington pairs offer hFE > 1000 at similar current ratings.

Working Principle: TIP42C Working Principle

The TIP42C is a silicon PNP epitaxial-base power transistor. Current flows from emitter to collector, controlled by base current flowing out of the base. The base-emitter junction requires approximately -0.65V forward bias (emitter more positive than base). For saturation at -3A collector current with hFE(min)=15, the required base current is 3A/15 = 200mA. In push-pull audio amplifiers, the TIP41C (NPN) conducts during the positive output half-cycle and the TIP42C (PNP) conducts during the negative half-cycle. Bias circuits set the quiescent current to eliminate crossover distortion. The TO-220 package tab is connected to the collector, requiring an insulating washer when mounting to a grounded heatsink.

Pin Description: TIP42C Pin Definition and Functions
Pin Name Function
1 Base Control input (pull below emitter to turn on)
2 Collector Current flows out (tab connected to collector)
3 Emitter Current flows in (connect to VCC for high-side)
Application Scenarios: In which products and applications is TIP42C used
  • Push-pull audio amplifier output stage paired with TIP41C NPN complement
  • High-current PNP switching for power supply pass transistor at -6A
  • H-bridge motor driver using TIP41C/TIP42C complementary pairs
  • Negative voltage regulation pass transistor for -100V rated supply
Alternative Models: What chips are recommended as replacements for TIP42C
Model Manufacturer Key Difference
TIP41C onsemi NPN complement, +100V, +6A
TIP147 onsemi PNP Darlington, -100V, -10A, hFE>1000
BD140 onsemi PNP, -80V, -1.5A, lower power
MJE2955T onsemi PNP, -60V, -10A, higher current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1