Opens in a new tab

TJA1050T/CM,118

High-speed CAN transceiver, ISO 11898, 1Mbaud, silent mode, SO-8

5621

Effective Inventory

Image for reference only

Manufacturer Part:

TJA1050T/CM,118

Package:

SO-8 / SOT96-1 (4.9 x 3.9 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TJA1050T/CM,118 from NXP Semiconductors is a high-speed CAN transceiver serving as the interface between a CAN protocol controller and the physical bus. Fully compliant with ISO 11898, it supports baud rates up to 1Mbaud with very low electromagnetic emission, silent mode, and TXD dominant time-out protection.

Key Specifications

Supply Voltage 4.75V to 5.25V
Baud Rate Up to 1 Mbaud
Common Mode Range -12V to +12V
Differential Threshold 0.5V to 0.9V (0.7V typical)
Bus Pins DC Voltage -27V to +40V
Propagation Delay 250ns max (TXD to RXD)
Nodes on Bus At least 110
Operating Temperature -40 to 125 C
Package SO-8 (SOT96-1)

Features

  • Fully ISO 11898 compliant
  • High speed up to 1 Mbaud
  • Very low electromagnetic emission (EME)
  • Wide common-mode range for high EMI
  • Silent mode (transmitter disabled)
  • TXD dominant time-out function
  • Input levels compatible with 3.3V and 5V
  • Thermal protection and short-circuit proof
  • Unpowered node does not disturb bus
  • At least 110 nodes connectable

Applications

  • Automotive CAN bus networks
  • Industrial CAN communication
  • Motor controller CAN interfaces
  • Building automation CAN nodes
  • Medical equipment CAN networks
Product Introduction: TJA1050T/CM,118 Product Introduction

The TJA1050T from NXP is a high-speed CAN transceiver compliant with ISO 11898, supporting up to 1Mbaud. It provides differential transmit and receive capability between the CAN controller and bus. Features very low EME, silent mode, TXD dominant time-out, thermal protection, and 3.3V/5V compatible inputs. Successor to PCA82C250 with improved EME and unpowered node behavior.

Working Principle: TJA1050T/CM,118 Working Principle

The driver converts single-ended TXD to differential CANH/CANL bus signals. In dominant state (TXD=low), CANH goes high and CANL goes low with ~2V differential. In recessive state (TXD=high or floating), both outputs sit at VCC/2. The S pin selects high-speed mode (S=GND) or silent mode (S=VCC, transmitter disabled). TXD dominant time-out prevents bus lockup if TXD is stuck low (>450us typical). Thermal shutdown disables the driver at ~165 C junction temperature.

Pin Description: TJA1050T/CM,118 Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input
2 GND Ground Ground
3 VCC Power 5V supply
4 RXD Output Receive data output
5 Vref Output Reference voltage (~VCC/2)
6 CANL I/O Low-level CAN bus line
7 CANH I/O High-level CAN bus line
8 S Input Mode select (GND=high speed, VCC=silent)
Application Scenarios: In which products and applications is TJA1050T/CM,118 used
  • Automotive CAN 2.0B active bus communication
  • Industrial motor controller CAN interface
  • Building automation CAN-based networks
  • Medical device CAN communication
  • Replacement for PCA82C250 in legacy designs
Alternative Models: What chips are recommended as replacements for TJA1050T/CM,118
Manufacturer Part Number Package Notes
NXP TJA1040T SO-8 Standby mode (VCC/2), pin compatible
NXP TJA1043T SO-14 With CAN partial networking
TI SN65HVD230DR SOIC-8 3.3V CAN transceiver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1