Opens in a new tab

TJA1050T

High-speed CAN transceiver, ISO 11898, 1Mbps, SOIC-8, automotive grade

4045

Effective Inventory

Image for reference only

Manufacturer Part:

TJA1050T

Package:

SOIC-8 (4.9 x 3.9 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TJA1050T from NXP Semiconductors is a high-speed CAN transceiver providing the physical interface between the CAN protocol controller and the physical bus. It supports CAN bus speeds up to 1 Mbps and is fully compatible with the ISO 11898 standard in an SOIC-8 package.

Key Specifications

Protocol CAN 2.0A/B (ISO 11898)
Max Bus Speed 1 Mbps
Supply Voltage 4.75V to 5.25V
Standby Current 10 uA (typ)
Bus Common Mode Range -12V to +12V
ESD Protection Greater than 4 kV (HBM)
Short-Circuit Protection Bus pins to +/- 18V
Operating Temperature -40 to 125 C
Package SOIC-8

Features

  • Full ISO 11898 compliance for CAN 2.0A/B
  • Very low electromagnetic emission (EME)
  • Standby mode with 10uA current consumption

Applications

  • Automotive CAN bus networks
  • Industrial automation CAN bus systems
  • Motor vehicle body electronics
  • Building automation CAN networks
  • Medical equipment CAN bus communication
Product Introduction: TJA1050T Product Introduction

The TJA1050T from NXP Semiconductors is a high-speed CAN transceiver that serves as the interface between the CAN protocol controller and the physical bus lines. Fully compliant with the ISO 11898 standard, it supports data rates up to 1 Mbps and provides differential transmit and receive capability. The device features very low electromagnetic emission, excellent electromagnetic immunity, and a standby mode consuming only 10uA, making it ideal for automotive and industrial CAN bus applications where power consumption and EMC compliance are critical.

Working Principle: TJA1050T Working Principle

The TJA1050T operates as a differential bus transceiver for the Controller Area Network protocol. **Transmit Path**: The TXD input from the CAN controller drives the bus driver, which generates the differential voltage between CANH and CANL. A dominant bit (TXD=low) drives CANH high (3.5V) and CANL low (1.5V), producing 2V differential. A recessive bit (TXD=high) releases both lines to 2.5V (zero differential). **Receive Path**: The differential receiver continuously monitors the CANH-CANL voltage and outputs the decoded logic level on RXD to the CAN controller. The receiver operates even in standby mode (with very slow response) for remote wake-up detection. **Bus Protection**: CANH and CANL pins are protected against short circuits to +/-18V, and provide ESD protection greater than 4kV. The common mode range extends from -12V to +12V, ensuring reliable communication in noisy automotive environments. **Standby Mode**: The S pin controls operating mode. When S is high, the device enters standby mode drawing only 10uA. A dominant bit on the bus in standby mode generates a wake-up signal.

Pin Description: TJA1050T Pin Definition and Functions
Pin Name Description
1 TXD Transmit data input (from CAN controller)
2 GND Ground
3 VCC 5V power supply
4 RXD Receive data output (to CAN controller)
5 VREF Reference voltage output (VCC/2 = 2.5V)
6 CANL CAN bus low line
7 CANH CAN bus high line
8 S Standby mode control (high=standby, low=normal)
Application Scenarios: In which products and applications is TJA1050T used
  • Automotive ECU: CAN bus communication between engine, transmission, ABS, and body control modules
  • Industrial CANopen: Networked PLC and sensor communication in factory automation systems
  • EV Battery Management: CAN bus linking BMS master to cell monitoring slaves in electric vehicles
  • Medical Equipment: CAN bus connecting patient monitoring modules and treatment devices
  • Building Automation: HVAC and lighting control networks using CAN bus backbone
Alternative Models: What chips are recommended as replacements for TJA1050T
Model Manufacturer Key Difference
TJA1051T NXP Improved ESD, pin-compatible, CAN FD ready
SN65HVD230DR TI 3.3V supply, CAN 2.0B, SOIC-8
MCP2551-I/SN Microchip 5V CAN transceiver, 1Mbps, SOIC-8
TJA1042T NXP CAN FD (5Mbps), standby, VIO pin
ISO1050DUBR TI Isolated CAN transceiver, 5000Vrms

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1