Opens in a new tab

TL052CDR

Dual JFET-input precision op-amp, 3MHz GBW, SOIC-8

6849

Effective Inventory

Image for reference only

Manufacturer Part:

TL052CDR

Package:

SOIC-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TL052CDR from TI is a dual JFET-input precision operational amplifier with very low input bias current (30 pA) and low offset voltage (0.6 mV typical). It provides 3 MHz gain-bandwidth product and 3 V/µs slew rate, making it suitable for high-impedance sensor interfaces and precision signal conditioning.

Key Specifications

Function Dual JFET-input precision op-amp
Input Offset Voltage Typical 0.6 mV
Bias Current 30 pA (JFET input)
Gain-Bandwidth Product 3 MHz
Slew Rate 3 V/µs
Supply Voltage ±5V to ±18V
Package SOIC-8 (3.9×4.9mm)

Working Principle

JFET-input stage provides extremely low input bias current (30 pA) for high-impedance source interfacing without loading. Internal compensation ensures stability at unity gain. The dual configuration enables stereo audio, differential amplification, or cascaded filter stages in a single package.

Applications

  • High-impedance sensor interface (pH, photodiode)
  • Precision filter
  • Audio preamplifier
  • Data acquisition front-end
Product Introduction: TL052CDR Product Introduction

The TL052CDR from TI is a dual JFET-input precision operational amplifier with very low input bias current (30 pA) and low offset voltage (0.6 mV typical). It provides 3 MHz gain-bandwidth product and 3 V/µs slew rate, making it suitable for high-impedance sensor interfaces and precision signal conditioning.

Working Principle: TL052CDR Working Principle

JFET-input stage provides extremely low input bias current (30 pA) for high-impedance source interfacing without loading. Internal compensation ensures stability at unity gain. The dual configuration enables stereo audio, differential amplification, or cascaded filter stages in a single package.

Pin Description: TL052CDR Pin Definition and Functions
Pin Name Description
1 1OUT Channel 1 output
2 1IN- Channel 1 inverting input
3 1IN+ Channel 1 non-inverting input
4 VCC- Negative supply
5 2IN+ Channel 2 non-inverting input
6 2IN- Channel 2 inverting input
7 2OUT Channel 2 output
8 VCC+ Positive supply
Application Scenarios: In which products and applications is TL052CDR used
  • High-impedance sensor interface (pH, photodiode)
  • Precision filter
  • Audio preamplifier
  • Data acquisition front-end
Alternative Models: What chips are recommended as replacements for TL052CDR
Model Manufacturer Key Difference
TL072 TI Lower cost, higher offset
OPA2134 TI FET-input audio grade

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1