Opens in a new tab

TL082BCDT

Dual JFET op amp, 3MHz, 13V/us, 30pA Ib, SOIC-8

12000

Effective Inventory

Image for reference only

Manufacturer Part:

TL082BCDT

Package:

8-Pin SOIC (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TL082BCDT is a STMicroelectronics dual JFET-input op amp with 3MHz GBW, 13V/us SR, low input bias current, and +/-15V supply. BC grade with tighter offset. Packaged in SOIC-8, 0C to +70C.

Key Specifications

Channels 2 (dual)
GBW 3 MHz
SR 13 V/us
Ib 30 pA typical
Vos 3 mV max (BC grade)
Supply +/-3.5V to +/-18V

Features

  • Dual JFET-input op amp
  • 3MHz gain bandwidth
  • 13V/us slew rate
  • 30pA low input bias current
  • 3mV max offset (BC grade)
  • +/-15V dual supply
  • Industry-standard TL082 upgrade

Applications

  • Audio signal processing
  • Active filters
  • Instrumentation front-end
  • Function generators
Product Introduction: TL082BCDT Product Introduction

The TL082BCDT is a STMicroelectronics dual JFET-input operational amplifier in an 8-pin SOIC package, BC grade with improved offset specification. The JFET input stage provides 30pA typical input bias current, four orders of magnitude lower than bipolar-input op amps like the LM358, making the TL082 ideal for high-impedance signal sources such as piezoelectric sensors, photodiodes, and capacitor-coupled audio circuits. The 3MHz GBW and 13V/us slew rate provide bandwidth and speed for audio signal processing, active filters up to several hundred kHz, and moderate-speed data acquisition. The +/-3.5V to +/-18V dual supply range supports the traditional +/-15V analog rail for maximum dynamic range. The BC grade provides 3mV maximum input offset voltage, tighter than the standard B grade (5mV) and C grade (10mV). The TL082 is a pin-compatible upgrade of the industry-standard TL082 with improved specifications. The high input impedance and low bias current make it well-suited for integrators, sample-and-hold circuits, and long-time-constant filters. Packaged in SOIC-8 for commercial 0C to +70C applications.

Working Principle: TL082BCDT Working Principle

The TL082 uses a JFET-input differential pair as the input stage. N-channel JFETs provide very high input impedance (typically 10^12 ohms) and extremely low gate leakage current (30pA). The JFET input stage drives a bipolar gain stage with 3MHz dominant-pole compensation. The 13V/us slew rate is set by the available tail current in the input stage to charge the compensation capacitor. In a JFET-input op amp, the slew rate is typically higher than bipolar-input types because the JFET tail current can be larger relative to the compensation capacitor value. The class-AB output stage uses complementary NPN/PNP emitter followers with current limiting and short-circuit protection. The offset voltage is determined by the JFET pair matching; the BC grade is selected for 3mV maximum offset through wafer-level testing. The TL082 does not have offset null pins (unlike TL081 single version), so external offset correction requires a servo loop if needed. The device is internally compensated for unity-gain stability.

Pin Description: TL082BCDT Pin Definition and Functions
Pin Mnemonic Description
1 OUT A Output A
2 IN- A Inverting input A
3 IN+ A Non-inverting input A
4 V- Negative supply
5 IN+ B Non-inverting input B
6 IN- B Inverting input B
7 OUT B Output B
8 V+ Positive supply
Application Scenarios: In which products and applications is TL082BCDT used
  • Audio preamplifier and mixer with 30pA JFET input for capacitor-coupled sources
  • Active Butterworth/Sallen-Key filter with 3MHz GBW and 13V/us slew rate
  • Piezoelectric sensor charge amplifier with high-impedance JFET input
  • Function generator integrator/differentiator with +/-15V dynamic range
Alternative Models: What chips are recommended as replacements for TL082BCDT
Model Manufacturer Key Difference
TL082ACDT ST AC grade, 6mV Vos
TL082CDT ST C grade, 15mV Vos
TL072BCDT ST Lower noise version
LF353 TI Similar JFET dual

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1