Opens in a new tab

TL431ACDBZR

Prog shunt Vref, 2.495V, +/-0.5%, 1-100mA, SOT-23-3

16800

Effective Inventory

Image for reference only

Manufacturer Part:

TL431ACDBZR

Package:

SOT-23-3 (2.90 x 1.30 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TL431ACDBZR from Texas Instruments is a precision programmable shunt voltage reference with 2.495V internal reference, +/-0.5% initial accuracy, and 1-100mA cathode current range in a SOT-23-3 package.

Key Specifications

Reference Voltage 2.495 V (internal, programmable to 36V)
Initial Accuracy +/-0.5% (AC grade)
Temperature Drift 6 mV typ over -40 to +125°C
Cathode Current Range 1 mA to 100 mA
Reference Input Current 2 uA typical
Dynamic Impedance 0.2 Ohm typical
Output Voltage Range Vref to 36 V (programmable)
Operating Temperature -40°C to +125°C
Package SOT-23-3

Features

  • Precision shunt reference with +/-0.5% accuracy and 0.2 Ohm dynamic impedance
  • Programmable output from 2.495V to 36V with only 2uA reference input current

Applications

  • SMPS feedback loop error amplifier and optocoupler driver
  • Precision voltage reference and comparator threshold generator
Product Introduction: TL431ACDBZR Product Introduction

The TL431ACDBZR from Texas Instruments is the industry-standard precision programmable shunt voltage reference in a tiny SOT-23-3 surface-mount package. The device consists of a 2.495V internal bandgap reference, error amplifier, and open-collector NPN output transistor in a three-terminal shunt regulator configuration. The AC grade provides +/-0.5% initial accuracy at 25°C. The output voltage is programmable from 2.495V to 36V using two external resistors. The very low 0.2 Ohm dynamic impedance ensures tight regulation under varying load conditions. The 1mA to 100mA cathode current range covers the full range from micropower biasing to direct optocoupler LED drive in SMPS feedback loops. The SOT-23-3 package is the smallest available for the TL431, ideal for space-constrained designs.

Working Principle: TL431ACDBZR Working Principle

The TL431ACDBZR operates as a three-terminal programmable shunt voltage regulator. (1) Internal Reference: A bandgap cell generates the internal 2.495V reference. The reference pin (REF) is connected to the non-inverting input of an internal error amplifier. (2) Shunt Regulation: The inverting input of the error amplifier is also connected to the REF pin through the internal reference. When the voltage at REF exceeds 2.495V, the error amplifier drives the NPN output transistor to sink more cathode current, pulling the cathode voltage lower. When REF is below 2.495V, the NPN is off and the cathode current is at minimum. (3) Programmable Output: External resistors R1 and R2 form a voltage divider from the cathode to ground, with the midpoint connected to REF. The output voltage is VOUT = Vref x (1 + R1/R2) + Iref x R1. Since Iref is only 2uA, the voltage is accurately set by the resistor ratio. (4) SMPS Feedback: In a typical SMPS application, the TL431 monitors the output voltage through a resistor divider. When the output rises above the setpoint, the TL431 cathode current increases, driving the optocoupler LED harder, which signals the primary-side PWM controller to reduce duty cycle.

Pin Description: TL431ACDBZR Pin Definition and Functions
Pin Name Function
1 REF Reference input (2.495V threshold)
2 Anode Ground (anode of NPN)
3 Cathode Output/shunt (1-100mA)
Application Scenarios: In which products and applications is TL431ACDBZR used
  • SMPS feedback error amplifier driving optocoupler LED at 2.495V reference
  • Programmable voltage reference from 2.495V to 36V with +/-0.5% accuracy
Alternative Models: What chips are recommended as replacements for TL431ACDBZR
Manufacturer Part Number Package Notes
TI TL431AIDBZR SOT-23-3 +/-1% accuracy, lower cost
onsemi TL431ACDBZRG SOT-23-3 Pin-compatible, same spec
ADI ADR510ARTZ-R2 SOT-23-3 Fixed 1.0V reference

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1