Opens in a new tab

TL431AIDBZR

Adjustable precision shunt regulator, 2.495V-36V output, 1% tolerance (A grade), 0.2 ohm Zout, SOT-23-3

298801

Effective Inventory

Image for reference only

Manufacturer Part:

TL431AIDBZR

Package:

SOT-23-3 (DBZ) (2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

The TL431AIDBZR is a three-terminal adjustable precision shunt regulator from TI in SOT-23-3 (2.9×1.3mm). Programmable output voltage from 2.495V to 36V via two external resistors. 1% initial accuracy (A grade). Cathode current: 1mA to 100mA. 0.2 ohm typical dynamic output impedance. Bandgap reference with low temperature drift. Sharp turn-on characteristic replaces Zener diodes. -40C to +85C (I grade). AEC-Q100 Grade 1. MSL-1, RoHS, EAR99. Tape and Reel, 3000/reel. Pin 1=REF, Pin 2=ANODE, Pin 3=CATHODE. Industry-standard voltage reference for SMPS feedback loops.

Product Introduction: TL431AIDBZR Product Introduction

The TL431AIDBZR is a three-terminal adjustable precision shunt regulator from Texas Instruments, housed in a compact SOT-23-3 (DBZ) package. It is part of the industry-standard TL431 family, widely used as a programmable voltage reference in power supplies, battery chargers, and voltage monitoring circuits. The A suffix denotes 1% initial reference voltage accuracy at 25C.

The device provides an output voltage adjustable from 2.495V (Vref) to 36V using two external resistors. The internal bandgap reference voltage is nominally 2.495V with a typical output impedance of only 0.2 ohms, providing excellent load regulation. The sharp turn-on characteristic makes the TL431 an effective replacement for Zener diodes in many applications.

Key specifications include: reference voltage 2.495V (1% tolerance for A grade), cathode current range 1 mA to 100 mA, minimum cathode current for regulation 400 uA (some sources cite 700 uA max), dynamic output impedance 0.2 ohms typical, and operating temperature range -40C to +85C (I suffix). The cathode-to-anode voltage rating is 37V absolute maximum.

The TL431AIDBZR features a bandgap reference, error amplifier, and open-collector NPN output transistor in a single three-terminal device. The REF pin connects to the non-inverting input of the internal error amplifier. When the voltage at REF exceeds the internal 2.495V reference, the output transistor conducts, sinking cathode current and regulating the output voltage.

The DBZ (SOT-23-3) package has the following pin assignment (top view): Pin 1 = REF, Pin 2 = ANODE, Pin 3 = CATHODE. Note that the TL432 variant has a different pin assignment for the same package. The device marking code is CE% for TI production.

The TL431AIDBZR is RoHS compliant, NiPdAu lead finish, MSL Level 1 (unlimited floor life at 260C peak reflow), and EAR99 classified. Tape and reel packaging with 3,000 units per reel. The device is AEC-Q100 Grade 1 qualified, making it suitable for automotive applications.

This is one of the most ubiquitous analog components in the electronics industry, found in virtually every switched-mode power supply (SMPS) as the secondary-side voltage reference in the optocoupler feedback loop.

Working Principle: TL431AIDBZR Working Principle

The TL431AIDBZR operates as a three-terminal programmable shunt regulator combining a precision bandgap voltage reference, error amplifier, and open-collector output transistor in a single monolithic device.

Internal Architecture: The device contains three functional blocks: (1) a temperature-compensated bandgap reference that produces a stable 2.495V reference voltage, (2) a high-gain error amplifier that compares the voltage at the REF pin against the internal reference, and (3) an NPN output transistor whose collector is connected to the CATHODE terminal and whose emitter is connected to the ANODE terminal. The error amplifier output drives the base of the NPN transistor.

Shunt Regulation Principle: In the basic shunt regulator configuration, the CATHODE is connected through a series resistor (Rbias) to the positive supply, the ANODE is connected to ground, and the REF pin senses the output voltage through a resistor divider (R1 from cathode to REF, R2 from REF to anode). The output voltage is determined by: Vout = Vref x (1 + R1/R2), where Vref = 2.495V. When the output voltage rises above the set point, the voltage at REF exceeds the internal 2.495V reference, the error amplifier drives the NPN transistor harder, increasing cathode current through Rbias, which drops more voltage across Rbias and pulls the output voltage back down. Conversely, when the output voltage falls below the set point, cathode current decreases, less voltage drops across Rbias, and the output voltage rises.

Closed-Loop Operation: For stable closed-loop operation, the TL431 requires a minimum cathode current of 1 mA (some sources specify 400-700 uA) and a minimum load capacitance with appropriate ESR for phase margin. A common stability criterion requires that the load capacitance and ESR produce a zero in the loop transfer function within the appropriate frequency range. The data sheet provides stability boundary curves showing the allowed capacitance range versus ESR for different cathode currents.

Open-Loop (Comparator) Mode: The TL431 can also operate as a comparator with an integrated 2.495V reference. In this mode, the REF pin is driven directly by the signal to be monitored. When the signal exceeds 2.495V, the cathode conducts; when below 2.495V, the cathode is off. This is useful for overvoltage protection and voltage monitoring circuits.

Dynamic Impedance: The typical dynamic output impedance is 0.2 ohms when the device is operating in the active regulation region (cathode current above the minimum for regulation). This low impedance provides excellent load regulation, comparable to or better than many linear regulators.

Temperature Stability: The bandgap reference is designed for low temperature drift. For the A-grade I-temperature-range device, the typical drift is 14 mV over the -40C to +85C range. The temperature coefficient depends on the operating cathode voltage — at Vka = Vref (2.495V), the drift is minimized, while at higher cathode voltages, the drift increases proportionally.

Pin Description: TL431AIDBZR Pin Definition and Functions
Pin (SOT-23-3) Name Type Description
1 REF Input Reference input; connected to internal error amplifier non-inverting input; voltage threshold is 2.495V; connect to resistor divider center tap to set output voltage; input current typically 2 uA
2 ANODE Power Ground reference; connect to circuit ground or lowest potential; internally connected to NPN emitter and substrate
3 CATHODE Output Shunt current output; connect through bias resistor to positive supply; sinks 1 mA to 100 mA to regulate voltage; open-collector NPN output
Application Scenarios: In which products and applications is TL431AIDBZR used
Application Description
SMPS Voltage Feedback Secondary-side reference in isolated flyback/forward converters; paired with optocoupler (e.g., PC817) to close the voltage regulation loop; 1% accuracy ensures tight output voltage regulation
Adjustable Voltage Reference Output voltage programmable from 2.495V to 36V via external resistor divider; replaces fixed Zener diodes with superior precision and temperature stability
Overvoltage Protection Open-loop comparator mode: when REF exceeds 2.495V, cathode conducts and triggers protection circuit; useful for OVP in battery chargers and power supplies
Precision Current Sink Combined with external PNP transistor or MOSFET, creates a precision constant-current sink; Iout = Vref / Rsense = 2.495V / Rsense
Battery Charger Regulation Controls charging voltage in Li-Ion and lead-acid battery chargers; 0.2 ohm output impedance provides stable voltage under varying load conditions
Alternative Models: What chips are recommended as replacements for TL431AIDBZR
Model Manufacturer Compatibility Key Difference
TL431BIDBZR TI Pin-Compatible / Same Package B-grade with 0.5% tolerance (vs 1% A-grade); higher precision for tighter regulation requirements; identical pinout and electrical characteristics
TLV431AIDBZR TI Pin-Compatible Low-voltage version; Vref = 1.24V (vs 2.495V); for sub-2.5V applications; same SOT-23-3 package
KA431AZTA ON Semi Functionally Equivalent Industry-standard TL431 clone; 1% A-grade; same pinout; widely available; check specific electrical specs for critical applications
LM431ACM3X TI Functionally Equivalent Same TL431 family; A-grade 1%; SOT-23-3; different marking; equivalent performance
TL431ACDBZR TI Pin-Compatible / Same Package C-temperature grade (0C to 70C vs -40C to 85C); same 1% tolerance; lower cost for commercial-only applications

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1