Opens in a new tab

TLC2272CDR

Dual rail-to-rail CMOS op-amp, 2.2 MHz GBW, 9 nV/sqrt(Hz), 1 pA Ibias, SOIC-8

8500

Effective Inventory

Image for reference only

Manufacturer Part:

TLC2272CDR

Package:

SOIC-8 (3.91 x 4.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC2272CDR from Texas Instruments is a dual rail-to-rail operational amplifier from the Advanced LinCMOS family. It features low noise of 9 nV/sqrt(Hz), high gain bandwidth of 2.2 MHz, slew rate of 3.6 V/us, and ultra-low input bias current of 1 pA. The device is fully specified for single-supply (5 V) and split-supply (+/-5 V) operation in an SOIC-8 package.

Key Specifications

Number of Channels 2 (Dual)
Gain Bandwidth Product 2.2 MHz typical
Slew Rate 3.6 V/us typical
Input Noise Voltage 9 nV/sqrt(Hz) at 1 kHz
Input Bias Current 1 pA typical
Input Offset Voltage 950 uV max
Supply Voltage Range 4.4 V to 16 V
Operating Temperature 0°C to 70°C

Features

  • Rail-to-rail output swing for maximum dynamic range
  • Low noise: 9 nV/sqrt(Hz) typical at 1 kHz
  • Ultra-low input bias current: 1 pA typical
  • Common-mode input range includes negative rail
  • High gain bandwidth: 2.2 MHz typical
  • High slew rate: 3.6 V/us typical
  • Fully specified for single and split supply operation
  • Upgrade replacement for TLC272 and TLC274

Applications

  • Piezoelectric transducer signal conditioning
  • Hand-held monitoring and remote sensing
  • ADC driver interfaces
  • Battery-powered instrumentation
Product Introduction: TLC2272CDR Product Introduction

The TLC2272CDR is a dual rail-to-rail operational amplifier from Texas Instruments’ Advanced LinCMOS family, designed for applications requiring low noise, high input impedance, and wide output swing. The device features a noise voltage of 9 nV/sqrt(Hz) at 1 kHz, which is two times lower than competing CMOS op-amps, making it excellent for small-signal conditioning of high-impedance sources. The rail-to-rail output capability maximizes dynamic range in single-supply applications, while the common-mode input range includes the negative rail for ground-referenced signal processing. With a gain bandwidth of 2.2 MHz and a slew rate of 3.6 V/us, the TLC2272CDR offers higher speed than legacy CMOS op-amps while maintaining micropower consumption levels. The ultra-low 1 pA input bias current makes the device ideal for interfacing with high-impedance sensors such as piezoelectric transducers and pH probes.

Working Principle: TLC2272CDR Working Principle

The TLC2272CDR operates as a voltage-feedback operational amplifier using CMOS technology with three key circuit blocks: (1) The differential input stage uses PMOS transistors to achieve ultra-low input bias current (1 pA typical) and high input impedance. The input common-mode range extends to the negative supply rail, enabling single-supply operation with ground-referenced signals. (2) The gain stage provides the primary voltage amplification with a gain-bandwidth product of 2.2 MHz. Internal compensation ensures stability in unity-gain configurations without external components. The Advanced LinCMOS process provides low 1/f noise corner frequency and low input offset voltage. (3) The output stage uses a complementary CMOS push-pull configuration that swings to within millivolts of both supply rails, maximizing output dynamic range. The output can drive loads as low as 10 kohm to the rails, and the low quiescent current per amplifier (1.1 mA typical) makes it suitable for battery-powered applications.

Pin Description: TLC2272CDR Pin Definition and Functions
Pin No. Pin Name Function
1 1OUT Amplifier 1 output
2 1IN- Amplifier 1 inverting input
3 1IN+ Amplifier 1 non-inverting input
4 GND / V- Negative supply or ground
5 2IN+ Amplifier 2 non-inverting input
6 2IN- Amplifier 2 inverting input
7 2OUT Amplifier 2 output
8 V+ Positive supply voltage (4.4 V to 16 V)
Application Scenarios: In which products and applications is TLC2272CDR used
  • Piezoelectric sensor signal conditioning where 1 pA input bias current prevents sensor loading and 9 nV/sqrt(Hz) noise preserves signal integrity
  • Single-supply ADC driver circuits where rail-to-rail output maximizes the usable ADC input range
  • Portable medical instruments (blood glucose meters, pulse oximeters) requiring low power and low noise
  • Remote sensing and environmental monitoring nodes with high-impedance sensor interfaces and battery operation
Alternative Models: What chips are recommended as replacements for TLC2272CDR
Model Brand GBW Noise Ibias
TLC2272ACDR TI 2.2 MHz 9 nV/sqrt(Hz) 1 pA
TLV2462CDR TI 6.4 MHz 11 nV/sqrt(Hz) 1 pA
MCP6022-I/SN Microchip 10 MHz 8.7 nV/sqrt(Hz) 1 pA
OPA2340EA TI 5.5 MHz 4.5 nV/sqrt(Hz) 0.5 pA
LMV358IDR TI 1 MHz 40 nV/sqrt(Hz) 15 pA

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1