Opens in a new tab

TLE9180QK

3-phase brushless DC motor gate driver IC, SPI control, 5.5-40V, bootstrap HS drivers, LQFP-48

4468

Effective Inventory

Image for reference only

Manufacturer Part:

TLE9180QK

Package:

PG-LQFP-48 (7.0 x 7.0 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLE9180QK is a Infineon product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Type 3-Phase BLDC Motor Gate Driver
Control Interface SPI (16-bit)
Supply Voltage VS 5.5V to 40V
Charge Pump Voltage 12V (Typ)
HS Driver Current 0.5A Source / 0.5A Sink
LS Driver Current 0.5A Source / 0.5A Sink
Bootstrap Diode Integrated
Cross Current Protection Adjustable dead time
Current Sense Amplifier 3x integrated
Fault Diagnostics SPI status register + fault pin
Protection Overtemp, undervoltage, overcurrent, short circuit
Operating Temperature -40 C to +150 C
Package PG-LQFP-48
Qualification AEC-Q100

Features

3-phase gate driver for BLDC and PMSM motors; SPI interface for configuration and diagnostics; Integrated bootstrap diodes for high-side drive; 3 integrated current sense amplifiers; Adjustable cross-current protection with configurable dead time; Overtemperature warning and shutdown; Undervoltage lockout for HS and LS; Overcurrent protection; Short circuit protection; Fault flag output; SPI diagnostics register; AEC-Q100 qualified; Green Product (RoHS compliant)

Applications

Automotive BLDC motor control; Electric power steering (EPS); HVAC blower motors; Electric water pumps; Engine cooling fans; Transmission actuators; Industrial 3-phase motor drive

Product Introduction: TLE9180QK Product Introduction

The TLE9180QK from Infineon Technologies is a highly integrated 3-phase gate driver IC designed for driving external N-Channel MOSFETs in brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) applications. The device integrates three half-bridge gate drivers with internal bootstrap diodes, three current sense amplifiers, and a comprehensive protection and diagnostic system controlled via a 16-bit SPI interface. Operating from a 5.5V to 40V supply, the TLE9180QK generates the gate drive voltages for both high-side and low-side external MOSFETs through an integrated charge pump. The adjustable dead time feature prevents cross-conduction in the external half-bridges, while the three integrated current sense amplifiers enable phase current measurement for field-oriented control (FOC) algorithms. AEC-Q100 qualified and housed in a PG-LQFP-48 package, the TLE9180QK is specifically designed for automotive motor control applications including electric power steering, HVAC blowower motors, and electric water pumps.

Working Principle: TLE9180QK Working Principle

The TLE9180QK operates as a 3-phase half-bridge gate driver controlled via a 16-bit SPI interface. The host microcontroller writes SPI commands to set the PWM duty cycle for each of the three half-bridges, configure dead time, and read diagnostic status. The internal charge pump generates a voltage above the supply rail (typically 12V) to drive the high-side N-Channel MOSFET gates, with integrated bootstrap diodes maintaining the bootstrap capacitor charge during switching operation. Each half-bridge driver stage provides 0.5A source and 0.5A sink capability for charging and discharging the external MOSFET gate capacitance. The adjustable dead time inserts a programmable delay between the turn-off of one MOSFET and the turn-on of its complement in each half-bridge, preventing destructive cross-conduction. The three integrated current sense amplifiers measure the voltage across external shunt resistors in each phase, providing amplified signals to the MCU ADC for FOC current loop control. Protection circuits continuously monitor for overtemperature, undervoltage on multiple rails, overcurrent, and short circuit conditions, automatically disabling the outputs and reporting the fault via a dedicated fault pin and SPI status register.

Pin Description: TLE9180QK Pin Definition and Functions
Pin Name Type Function
1 VS Power Motor supply voltage (5.5V to 40V)
2 CP1 Analog Charge pump capacitor connection 1
3 CP2 Analog Charge pump capacitor connection 2
4-6 GH1-GH3 Output High-side gate driver outputs for phases 1-3
7-9 SH1-SH3 I/O Source pins / bootstrap return for phases 1-3
10-12 GL1-GL3 Output Low-side gate driver outputs for phases 1-3
13 CS1-CS3 Analog Current sense amplifier inputs for phases 1-3
14 SO1-SO3 Analog Current sense amplifier outputs for phases 1-3
15 SDI Input SPI data input
16 SDO Output SPI data output
17 CLK Input SPI clock input
18 CSN Input SPI chip select (active low)
19 FAULT Output Fault flag output (active low open drain)
Application Scenarios: In which products and applications is TLE9180QK used
  • Electric Power Steering (EPS): Drives the 3-phase BLDC motor in electric power steering systems with FOC current control via integrated sense amplifiers and AEC-Q100 qualification.
  • HVAC Blower Motors: Controls cabin blower speed and direction in automotive HVAC systems with SPI-configurable parameters and comprehensive fault diagnostics.
  • Electric Water Pumps: Drives 12V/24V brushless water pumps in engine cooling and battery thermal management with overtemperature and short circuit protection.
  • Industrial Motor Drive: Controls small PMSM motors in industrial automation with integrated current sensing eliminating external amplifier circuits.
Alternative Models: What chips are recommended as replacements for TLE9180QK
Manufacturer Part Number Package Channels Notes
Infineon TLE9183QK PG-LQFP-48 3 Newer generation, enhanced diagnostics
Infineon TLE9180D PG-LQFP-48 3 Automotive variant
STMicroelectronics L6398 SO-28 3 3-phase gate driver alternative
Texas Instruments DRV8323 VQFN-40 3 3-phase BLDC gate driver with SPI

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1