Opens in a new tab

TLE9201SG

Single half-bridge motor driver, 6A, SPI control, AEC-Q100, PG-DSO-8

5621

Effective Inventory

Image for reference only

Manufacturer Part:

TLE9201SG

Package:

PG-DSO-8 with Exposed Pad (5.0 × 4.0 × 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLE9201SG from Infineon Technologies is a single H-bridge motor driver IC in a PG-DSO-8 exposed pad package, designed for automotive and industrial DC motor control. It provides a single half-bridge output capable of driving up to 6 A continuous current, with SPI interface for control and diagnosis. The device is AEC-Q100 qualified and operates over the full automotive temperature range.

Key Specifications

Configuration Single Half-Bridge
Output Current 6 A continuous
Supply Voltage (VDD) 5 V (logic)
Supply Voltage (VS) 5 V to 28 V (power)
RDS(on) HS+LS 150 mΩ typical
Interface SPI (16-bit)
Diagnosis Overtemperature, short circuit, open load
Operating Temperature -40°C to +150°C (TJ)
Qualification AEC-Q100
Package PG-DSO-8 (exposed pad)

Features

  • Single half-bridge power stage with 6 A capability
  • 16-bit SPI interface for control and diagnosis
  • Comprehensive protection: overtemperature, short circuit, open load
  • Overcurrent shutdown with latch-off
  • Cross-current protection
  • AEC-Q100 Grade 0 qualified (up to 150°C TJ)

Applications

  • Automotive DC motor control
  • Flap and valve actuation
  • Pump and fan drives
  • Industrial motor drives
  • Robotics and automation
Product Introduction: TLE9201SG Product Introduction

The Infineon TLE9201SG is a single half-bridge motor driver designed for automotive and industrial DC motor control applications. It integrates a power output stage with 150 mΩ total RDS(on) (high-side + low-side) capable of delivering 6 A continuous current. Control and diagnostics are performed via a 16-bit SPI interface, enabling precise motor positioning and real-time fault detection including overtemperature, short circuit, and open load conditions. The device is AEC-Q100 Grade 0 qualified, supporting junction temperatures up to 150°C for demanding under-hood automotive applications such as flap actuators, pump drives, and HVAC vent controls.

Working Principle: TLE9201SG Working Principle

The TLE9201SG operates as a single half-bridge motor driver controlled through a 16-bit SPI interface. The power stage consists of a high-side and low-side NMOS transistor pair with 150 mΩ combined on-resistance. The SPI interface writes control bits to set the output state (HIGH, LOW, or HIGH-Z) and reads back diagnostic status flags. Protection circuits continuously monitor junction temperature, output current, and load conditions. Overtemperature triggers a thermal shutdown above 170°C. Short circuit protection limits current and latches off the output. Open load detection identifies disconnected loads during the off-state. Cross-current prevention ensures both switches are never simultaneously on.

Pin Description: TLE9201SG Pin Definition and Functions
Pin Name Description
1 VDD Logic Supply (5 V)
2 SDI SPI Data Input
3 SDO SPI Data Output
4 CSN SPI Chip Select (Active Low)
5 CLK SPI Clock Input
6 OUT Half-Bridge Output
7 VS Power Supply (5-28 V)
8 GND Ground
Application Scenarios: In which products and applications is TLE9201SG used
  • Automotive HVAC Flap: Precise actuator positioning with SPI-controlled PWM for air distribution flap motors
  • Cooling Fan Drive: 6 A half-bridge output drives radiator or blower fans with overtemperature protection
  • Pump Control: Bidirectional DC pump driving for fuel, washer, or coolant pumps in automotive systems
  • Industrial Valves: Proportional valve actuation with diagnostic feedback for process control
  • Robotics: Compact half-bridge stage for joint actuators with integrated short circuit and thermal protection
Alternative Models: What chips are recommended as replacements for TLE9201SG
Model Brand Channels Current (A) Interface
TLE9202SG Infineon Dual HB 6 SPI
TLE9201SH Infineon Single HB 6 SPI
VNH7070ASTR ST Single HB 15 PWM
NCV70522MNWR2G onsemi Dual HB 2.5 SPI
BTS716G Infineon Quad HS 7 Logic

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1