Opens in a new tab

TLE9250VSJ

ISO 11898-2/CAN FD transceiver, 5V, 5Mbps, support CAN XL, SOIC-8, AEC-Q100

4708

Effective Inventory

Image for reference only

Manufacturer Part:

TLE9250VSJ

Package:

PG-DSO-8 / SOIC-8 (4.9 x 3.91 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLE9250VSJ is a Infineon product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Type High-Speed CAN FD Transceiver
Standard ISO 11898-2:2016 / CAN FD / CAN XL
Data Rate Up to 5 Mbps (CAN FD)
Supply Voltage VCC 4.75V to 5.25V
Supply Voltage VIO 2.3V to 5.25V (I/O level shift)
Bus Common Mode Range -30V to +30V
TXD Dominant Timeout 3.5 ms (Typ)
Standby Current 10 uA (Typ)
RXD Pull-Up Internal
Wake-Up Remote wake via bus pattern
ESD Protection IEC 61000-4-2, +/-8kV HBM
Operating Temperature -40 C to +150 C
Package PG-DSO-8 (SOIC-8)
Qualification AEC-Q100 Grade 0

Features

High-speed CAN/CAN FD/CAN XL transceiver compliant with ISO 11898-2:2016; Data rates up to 5 Mbps for CAN FD; I/O voltage range 2.3V to 5.25V for level shifting; Very low standby current (10 uA typical); Remote wake-up capability via bus pattern; TXD dominant timeout protection; Overtemperature protection; Short circuit protection on bus pins; Undervoltage lockout; ESD protection per IEC 61000-4-2; AEC-Q100 Grade 0 qualified (-40C to 150C); Green Product (RoHS compliant and halogen-free)

Applications

Automotive CAN bus communication; Body Control Modules; Gateway ECUs; ADAS sensor networks; Powertrain communication; Industrial CAN networks; CAN FD network upgrade; Battery management systems

Product Introduction: TLE9250VSJ Product Introduction

The TLE9250VSJ from Infineon Technologies is a high-speed CAN transceiver that supports Classical CAN, CAN FD (Flexible Data Rate), and CAN XL protocols, fully compliant with ISO 11898-2:2016. The device provides the physical layer interface between the CAN protocol controller (MCU) and the differential CAN bus, supporting data rates up to 5 Mbps in CAN FD mode. A key feature is the independent I/O supply voltage pin (VIO) that operates from 2.3V to 5.25V, enabling direct connection to 3.3V or 5V microcontrollers without external level shifting. The TLE9250VSJ features a very low standby current of typically 10uA, making it ideal for always-on automotive ECUs that must minimize battery drain during vehicle parking. The device supports remote wake-up via a defined bus pattern, allowing the ECU to transition from standby to normal mode upon bus activity. AEC-Q100 Grade 0 qualified for operation up to 150C, the TLE9250VSJ is designed for harsh automotive environments including powertrain and ADAS applications.

Working Principle: TLE9250VSJ Working Principle

The TLE9250VSJ operates as the physical layer transceiver between a CAN protocol controller and the differential CAN bus. In normal mode, the TXD input from the MCU drives the bus state: a dominant (low) TXD drives CANH high and CANL low creating a differential voltage, while a recessive (high) TXD leaves both bus lines biased to the common-mode voltage via internal termination. The receiver continuously monitors the bus differential voltage and outputs the decoded state on RXD to the MCU. The VIO pin sets the logic level for TXD and RXD, allowing direct interface to 2.3V-5.25V MCUs without level shifters. In standby mode, the driver is disabled and the receiver operates in low-power mode, monitoring the bus for a remote wake-up pattern. When a valid wake-up pattern is detected, the INH output activates an external voltage regulator to power up the ECU. The TXD dominant timeout prevents bus lockup if TXD is stuck dominant, automatically releasing the bus after 3.5ms. Bus pins include ESD protection clamps and can withstand common-mode voltages from -30V to +30V for robustness against ground offsets and electromagnetic interference.

Pin Description: TLE9250VSJ Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input; driven by MCU CAN controller (CMOS compatible)
2 GND Ground Ground reference
3 VCC Power 5V supply voltage (4.75V to 5.25V)
4 RXD Output Receive data output; drives MCU CAN controller (level set by VIO)
5 VIO Power I/O supply voltage (2.3V to 5.25V); sets TXD/RXD logic levels
6 CANL Bus CAN bus low-side line
7 CANH Bus CAN bus high-side line
8 STB Input Standby mode control; low = normal mode, high = standby mode
Application Scenarios: In which products and applications is TLE9250VSJ used
  • Automotive CAN FD Networks: Provides the physical layer for body, powertrain, and ADAS CAN FD buses with up to 5Mbps data rate and Grade 0 temperature rating.
  • Gateway ECUs: Enables multi-protocol CAN bus communication in central gateway modules with VIO level shifting for 3.3V MCUs.
  • Industrial CAN: Supports industrial CAN bus applications with high ESD immunity and wide common-mode range for noisy factory environments.
  • Battery Management Systems: Connects battery cell monitoring ICs to the vehicle CAN bus with ultra-low 10uA standby current for parked vehicle scenarios.
Alternative Models: What chips are recommended as replacements for TLE9250VSJ
Manufacturer Part Number Package Data Rate Notes
Infineon TLE9250VSK PG-DSO-8 5 Mbps VSON-8 variant
Infineon TLE9251VSJ PG-DSO-8 2 Mbps Classical CAN, lower cost
NXP TJA1043T SOIC-8 5 Mbps CAN FD transceiver, pin-compatible
Texas Instruments TCAN1043AV SOIC-8 5 Mbps CAN FD with wake and INH

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1