Opens in a new tab

TLE9278BQXXUMA1

4xCAN FD SBC, SMPS buck 750mA, boost converter, LDO 100mA, 30μA sleep, VQFN-48

1705

Effective Inventory

Image for reference only

Manufacturer Part:

TLE9278BQXXUMA1

Package:

VQFN-48 (7 x 7 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLE9278BQXXUMA1 is an Infineon OPTIREG™ Multi-CAN Power+ System Basis Chip (SBC) integrating four CAN FD transceivers, a high-efficiency SMPS buck regulator (750mA), a DC-DC boost converter, and a low-dropout voltage regulator in a single VQFN-48 package. It provides the highest level of integration for automotive gateway and body control module applications.

Key Specifications

CAN Transceivers 4x CAN FD (ISO 11898-2:2016), up to 5Mbps
Main Voltage Regulator SMPS Buck, 5V/3.3V, 750mA
Boost Converter 6.7V/8V/10V/12V (integrated FET switch)
LDO Regulator 5V, 100mA (off-board protected)
Sleep Mode Quiescent Current 30μA (typical)
Stop Mode Standby Current 55μA (typical)
Supply Voltage Range 5.5V to 28V
Operating Temperature -40°C to +150°C
Qualification AEC-Q100
Safety ISO 26262 ASIL-B ready

Features

  • 4x CAN FD transceivers compliant to ISO 11898-2:2016
  • High-efficiency SMPS buck regulator with external inductor
  • DC-DC boost converter with integrated FET switch and shunt
  • LDO regulator 5V/100mA protected for off-board usage
  • Dedicated VIO pin for I/O voltage supply selection
  • Configurable timeout and window watchdog with reset output
  • Fail-safe input and up to 3 fail-safe outputs
  • Universal high-voltage wake input with voltage level monitoring
  • Configurable cyclic wake in SBC Normal and Stop mode
  • 16-bit SPI interface for control and diagnostics
  • Overtemperature and short-circuit protection

Applications

  • Automotive gateway modules
  • Domain controllers for ADAS and autonomous driving
  • Body control modules (BCM)
  • HVAC ECU and control panels
  • Industrial HMI monitors and panels
Product Introduction: TLE9278BQXXUMA1 Product Introduction

The TLE9278BQXXUMA1 is an Infineon OPTIREG™ Multi-CAN Power+ System Basis Chip that integrates four CAN FD transceivers, a high-efficiency SMPS buck regulator (5V/3.3V, 750mA), a DC-DC boost converter, and a 5V/100mA LDO in a compact VQFN-48 package. With 30μA sleep mode current and AEC-Q100 qualification, it provides the highest integration level for automotive gateway and body control modules, saving up to 80% PCB board space compared to discrete solutions.

Working Principle: TLE9278BQXXUMA1 Working Principle

The TLE9278BQXXUMA1 integrates multiple power and communication functions into a single chip. The SMPS buck regulator uses an external inductor and internal MOSFET switches to efficiently convert the battery voltage to 5V or 3.3V at up to 750mA. The DC-DC boost converter uses an integrated FET switch and external shunt resistor to generate 6.7V-12V for low battery conditions (cold-crank support). The LDO provides a clean 5V/100mA rail for off-board sensors. The four CAN FD transceivers handle up to 5Mbps communication with wake-up capability. The SPI interface provides full control and diagnostic readback. The state machine manages SBC modes (Normal, Stop, Sleep, Restart, Fail-Safe) with configurable watchdog, cyclic wake, and fail-safe output control. The VIO pin allows direct connection to 3.3V or 5V microcontrollers.

Pin Description: TLE9278BQXXUMA1 Pin Definition and Functions
Pin Group Mnemonic Description
1-4 CAN1H/CAN1L-CAN4H/CAN4L 4x CAN FD bus pins
5-6 VCC1/VCC2 SMPS output / LDO output
7-8 SW/BST SMPS switch node / bootstrap
9 VBAT Battery supply input
10 VIO I/O voltage reference pin
11-20 SPI/CS/CLK/MISO SPI communication interface
21-24 WK/FO1-3 Wake input / fail-safe outputs
25-32 VCC1/RO/GPIO Regulator output / reset / GPIO
33-48 GND/PGND Signal and power ground
Application Scenarios: In which products and applications is TLE9278BQXXUMA1 used
  • Automotive central gateway with 4xCAN FD routing and SMPS 750mA MCU power
  • ADAS domain controller requiring multiple CAN buses and ASIL-B safety
  • Body control module (BCM) with 30μA sleep current battery management
  • HVAC ECU with boost converter for cold-crank low-voltage operation
  • Industrial multi-CAN communication node with SMPS power supply
Alternative Models: What chips are recommended as replacements for TLE9278BQXXUMA1
Model Manufacturer Key Difference
TLE9274QX Infineon 2x CAN + 4x LIN SBC variant
TLE926x Infineon Single CAN, mid-range SBC
NXP S32G274A NXP MCU with integrated CAN + SBC
TJA1145T NXP Single CAN SBC with 8μA sleep
NCV7430 onsemi Single CAN LIN SBC

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1