Opens in a new tab

TLP293(GR-TPL,E

Phototransistor photocoupler, CTR G-rank 100-300%, 3750Vrms, SOP-4

12292

Effective Inventory

Image for reference only

Manufacturer Part:

TLP293(GR-TPL,E

Package:

SO4 (SOP-4, 2.6 x 7.0 x 2.1 mm, 2.54mm pitch, MSL 3)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLP293(GR-TPL,E from Toshiba is a photocoupler with a gallium arsenide infrared LED optically coupled to a photo-transistor detector, providing 3750Vrms isolation in a SO4-4 (SOP-4) package with CTR rank G (100%-300%).

Key Specifications

Type Phototransistor Output Photocoupler
Isolation Voltage 3750 Vrms (min)
CTR (Current Transfer Ratio) 100% ~ 300% (G rank @ IF=5mA)
Collector-Emitter Voltage 80V
Collector Current 50 mA
Forward Current 50 mA
Forward Voltage 1.25V typical / 1.4V max
Rise Time 4 us typical
Fall Time 7 us typical
Package SO4 (SOP-4, 2.6 x 7.0 x 2.1 mm)
Operating Temperature -55 to +110 C
Safety Approvals UL1577, cUL, EN 60747-5-5 (VDE)

Features

  • G-rank CTR (100%-300%) for reliable low-current drive
  • 3750Vrms isolation voltage

Applications

  • Signal isolation in industrial control
  • Power supply feedback loops
  • Isolated communication interfaces
Product Introduction: TLP293(GR-TPL,E Product Introduction

The TLP293(GR-TPL,E from Toshiba is a G-rank CTR variant of the TLP293 photocoupler family. The (GR-TPL,E suffix specifically designates the G CTR rank (100%-300% at IF=5mA, VCE=5V), the TPL package style (SOP-4 with tape and reel), and the E tape specification. The high CTR of the G rank makes this device particularly suitable for low-current drive applications where the LED forward current is limited (e.g., 1-5mA), such as interfaces driven directly from 3.3V MCUs with current-limiting resistors. At IF=5mA, the G-rank device provides 5-15mA of collector current, sufficient to drive most logic inputs and small relays without additional amplification. The TLP293 series is the industry-standard SOP-4 photocoupler, widely used as a drop-in replacement for the discontinued PC817 series in new designs. The 3750Vrms isolation voltage provides reinforced insulation for mains-connected applications up to 300Vrms working voltage. The SO4 (SOP-4) package is the smallest standard photocoupler package with 2.54mm lead pitch, compatible with both through-hole and SMT assembly processes.

Working Principle: TLP293(GR-TPL,E Working Principle

The TLP293(GR-TPL,E operates as an optically coupled isolator. Key subsystems include: (1) LED Input – a gallium arsenide (GaAs) infrared LED emits photons when forward current (IF) flows; the forward voltage is 1.25V typical at IF=20mA; the LED must be driven with a current-limiting resistor calculated as R = (VDD – VF) / IF; the LED has a typical capacitance of 25pF which limits the maximum switching speed; (2) Phototransistor Output – an NPN phototransistor whose base region is exposed to the LED’s infrared emission; photons absorbed in the base generate electron-hole pairs that provide base current, turning the transistor on; the CTR (Current Transfer Ratio) = IC/IF x 100% defines the current gain; the G-rank CTR of 100-300% means the output can sink 1-3x the LED input current; (3) Isolation Barrier – a transparent silicone dielectric between the LED and phototransistor provides galvanic isolation of 3750Vrms minimum; the silicone has a high dielectric strength and optical transparency; the internal shield between input and output reduces capacitive coupling to less than 0.8pF, limiting common-mode transient immunity degradation; (4) Switching – the phototransistor rise/fall times (4us/7us typical) are dominated by the base charge storage; for faster switching, a base-emitter resistor can be added to speed up turn-off, but this reduces CTR significantly.

Pin Description: TLP293(GR-TPL,E Pin Definition and Functions
Pin Name Function
1 Anode LED anode (positive)
2 Cathode LED cathode (negative)
3 Emitter Phototransistor emitter
4 Collector Phototransistor collector
Application Scenarios: In which products and applications is TLP293(GR-TPL,E used
  • 3.3V MCU isolation: G-rank CTR (100-300%) allows MCU GPIO (3.3V, 2-5mA) to drive LED directly, providing sufficient IC (5-15mA) to switch logic on secondary side without amplifier
  • SMPS feedback: LED driven by error amplifier output on secondary side, collector feeds PWM controller on primary side, 3750Vrms isolation meets IEC 60950 safety requirements
  • Industrial I/O: isolates 24V PLC input from 3.3V MCU, G-rank CTR ensures reliable switching at low IF
Alternative Models: What chips are recommended as replacements for TLP293(GR-TPL,E
Manufacturer Part Number Package Notes
Toshiba TLP291(GB SOP-4 GB rank CTR (100-400%), wider range
Toshiba TLP293(V SOP-4 V rank CTR (50-150%), lower gain
Sharp PC817C DIP-4 Industry standard, C-rank CTR, through-hole
Vishay SFH619A-3X DIP-4 CTR 100-200%, through-hole alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1