Opens in a new tab

TLS810D1LDV50

5.0V 150mA LDO, 40V input, AEC-Q100, DSO-8, -40 to 150C

13187

Effective Inventory

Image for reference only

Manufacturer Part:

TLS810D1LDV50

Package:

DSO-8 (5.0×6.0x1.75mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Infineon TLS810D1LDV50 is an automotive-grade 5.0V fixed-output LDO linear voltage regulator. 150mA output, very low quiescent current, 40V max input in DSO-8 package.

Key Specifications

Output Voltage 5.0V (fixed)
Max Output Current 150mA
Input Voltage 4.5V to 40V
Dropout Voltage 400 mV typ @ 150mA
Quiescent Current 30 uA typ
Standby Current <1 uA
Qualification AEC-Q100
Operating Temp -40 to +150C
Package DSO-8 (5.0×6.0mm)

Features

  • AEC-Q100 automotive qualified
  • 40V high input voltage capability
  • 5.0V fixed output with +/-2% accuracy
  • 30uA low quiescent current
  • Enable and reset functions
  • Watchdog and window watchdog options

Applications

  • Automotive ECU 5V supply
  • Sensor supply regulation
  • CAN/LIN transceiver 5V rail
  • Industrial 24V-to-5V regulator
Product Introduction: TLS810D1LDV50 Product Introduction

The TLS810D1LDV50 from Infineon is an AEC-Q100 automotive LDO regulator with fixed 5.0V output and 150mA capability. The 40V max input voltage allows direct connection to 12V/24V automotive battery without pre-regulation. 30uA quiescent current minimizes battery drain in key-off states. Enable and reset functions support system power management. DSO-8 package for automotive PCB assembly.

Working Principle: TLS810D1LDV50 Working Principle

The TLS810 uses a PMOS pass transistor controlled by an error amplifier that compares a scaled output voltage with an internal bandgap reference. The high-voltage input stage allows operation up to 40V using a depletion-mode pre-regulator. The enable pin gates the pass transistor for <1uA standby. The reset output monitors output voltage and asserts low when VOUT drops below threshold.

Pin Description: TLS810D1LDV50 Pin Definition and Functions
Pin Name Description
1 IN Supply input (4.5-40V)
2 EN Enable input
3 NR Noise reduction
4 GND Ground
5 RO Reset output
6 ADJ/RES Adjust/Reset delay
7,8 OUT 5.0V output
Application Scenarios: In which products and applications is TLS810D1LDV50 used
  • Automotive ECU 5V supply
  • CAN/LIN 5V rail
  • 24V industrial to 5V
Alternative Models: What chips are recommended as replacements for TLS810D1LDV50
Model Manufacturer Key Difference
TLS810D1LDV33 Infineon 3.3V output variant

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1