Opens in a new tab

TLV2211IDBVR

Single micropower RRIO op-amp, 2.7-10V, 65kHz, 11uA, SOT-23-5

8750

Effective Inventory

Image for reference only

Manufacturer Part:

TLV2211IDBVR

Package:

SOT-23-5 (2.9 x 2.8 x 1.15 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV2211IDBVR is a single micropower rail-to-rail operational amplifier from Texas Instruments using Advanced LinCMOS technology. Consuming only 11 uA typical supply current with a GBW of 65 kHz and supply range of 2.7V to 10V, it features very low input bias current of 1 pA typical, making it ideal for high-impedance sensor interfacing in battery-powered applications in a SOT-23-5 package.

Key Specifications

Channels 1
Supply Voltage 2.7V to 10V
GBW (typ) 65 kHz
Slew Rate (typ) 0.025 V/us
Input Offset Voltage (max) 3 mV
Input Bias Current (typ) 1 pA
IQ per Channel (typ) 11 uA
Voltage Noise (typ at 1 kHz) 21 nV/sqrt(Hz)
Output Drive 10 mA
Package SOT-23-5 (2.9 x 2.8 mm)
Operating Temperature -40C to +85C

Features

  • Rail-to-rail output includes both supply rails
  • Very low power: 11 uA per channel typical
  • Ultra-low input bias current: 1 pA typical
  • Low noise: 21 nV/sqrt(Hz) at 1 kHz
  • Common-mode input range includes negative rail
  • Optimized pinout for board layout (inputs separated by GND)

Applications

  • Piezoelectric transducer signal conditioning
  • Handheld monitoring and remote sensing
  • Battery-powered sensor interfaces
  • ADC driver and buffer circuits
Product Introduction: TLV2211IDBVR Product Introduction

The TLV2211IDBVR from Texas Instruments is a single micropower operational amplifier built on Advanced LinCMOS technology, optimized for battery-powered and low-voltage applications. Consuming only 11 uA typical supply current, it achieves a gain-bandwidth product of 65 kHz with rail-to-rail output capability that includes both supply rails for maximum dynamic range. The ultra-low input bias current of 1 pA typical makes it excellent for interfacing with high-impedance sources such as piezoelectric transducers and pH electrodes. The optimized SOT-23-5 pinout separates inputs by GND to minimize coupling and leakage paths.

Working Principle: TLV2211IDBVR Working Principle

The TLV2211IDBVR uses Advanced LinCMOS CMOS technology with a rail-to-rail output stage. The CMOS input pair provides extremely low input bias current (1 pA typical), critical for high-impedance sensor applications where input loading must be minimized. The rail-to-rail output stage uses common-source output transistors that can swing to within millivolts of both supply rails, maximizing dynamic range in single-supply applications. The internal compensation provides stability in unity-gain configurations. The low 11 uA quiescent current is achieved through careful bias circuit design, making it suitable for always-on battery-powered circuits.

Pin Description: TLV2211IDBVR Pin Definition and Functions
Pin Name Type Function
1 NC – No connect
2 V- Power Negative supply or ground
3 + Input Non-inverting input
4 Output Output Amplifier output
5 V+ Power Positive supply 2.7-10V
Application Scenarios: In which products and applications is TLV2211IDBVR used
  • Piezoelectric transducer and accelerometer signal conditioning
  • Handheld health monitoring and portable instruments
  • Battery-powered remote sensor and data logger
  • ADC input buffer and driver in low-power systems
  • pH electrode and chemical sensor high-impedance interface
Alternative Models: What chips are recommended as replacements for TLV2211IDBVR
Manufacturer Part Number Package Notes
TI TLV9101DBVR SOT-23-5 Upgrade: RRIO, 1.1 MHz, 2.7-16V
TI TLV2211CDBVR SOT-23-5 Commercial temp (0-70C) version
Microchip MCP6041T-I/OT SOT-23-5 600 nA IQ, 1.4-6V, RRIO
TI TLV2761DBVR SOT-23-5 Lower IQ (0.5 uA), 2.7-10V
ADI ADA4505-1AKSZ SC-70 10 uA IQ, RRIO, zero-crossover

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1