Opens in a new tab

Home » Integrated Circuits ICs » TLV6710DDCR

TLV6710DDCR

36V window comparator, 400mV ref, 7uA, open-drain, SOT-23-6, 0.25% accuracy

11268

Effective Inventory

Image for reference only

Manufacturer Part:

TLV6710DDCR

Package:

SOT-23-THN-6 (2.90 x 1.60 x 0.95 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV6710DDCR from Texas Instruments is a micropower 36V window comparator with an integrated 400mV reference in a SOT-23-6 package. It provides two high-accuracy comparators with open-drain outputs for overvoltage and undervoltage monitoring.

Key Specifications

Supply Voltage 1.8 V to 36 V
Reference Voltage 400 mV (+/-0.25% typical)
Quiescent Current 7 uA (typical)
Output Type Open-drain (25V rating)
Hysteresis 5.5 mV (internal, typical)
Operating Temperature -40C to +125C

Features

  • 1.8V to 36V wide supply range for direct high-voltage monitoring
  • Internal 400mV reference with 0.25% typical accuracy
  • 7uA micropower consumption for always-on battery monitoring
  • Window comparator or dual independent comparator operation
  • 5.5mV internal hysteresis for noise immunity
  • Open-drain outputs rated to 25V for flexible voltage interfacing

Applications

  • Battery overvoltage and undervoltage protection
  • Power supply window monitoring in industrial systems
  • Relay and circuit breaker control
  • Door/window sensor and portable medical equipment
Product Introduction: TLV6710DDCR Product Introduction

The TLV6710DDCR from Texas Instruments is a micropower, high-voltage window comparator with an integrated 400mV reference in a SOT-23-6 thin package. The device operates from a 1.8V to 36V supply range, making it suitable for direct monitoring of battery stacks and power rails without additional voltage dividers on the supply pin. Two high-accuracy comparators with an internal 400mV reference and 0.25% typical threshold accuracy provide precise voltage monitoring. The device can be configured as a window comparator (monitoring both overvoltage and undervoltage conditions simultaneously) or as two independent comparators. OUTA is driven low when the voltage at INA+ drops below the threshold, functioning as an undervoltage detector. OUTB is driven low when the voltage at INB- rises above the threshold, functioning as an overvoltage detector. Both comparators include 5.5mV internal hysteresis for noise immunity, preventing output chattering on slowly moving input signals. The open-drain outputs are rated to 25V, allowing interface with logic supplies at different voltage levels. The 7uA typical quiescent current enables always-on monitoring in battery-powered applications.

Working Principle: TLV6710DDCR Working Principle

The TLV6710DDCR integrates two comparators with a common 400mV reference for window voltage monitoring. (1) Comparator A (Undervoltage): The inverting input of Comparator A is internally connected to the 400mV reference. When the voltage at INA+ (non-inverting) drops below 400mV minus hysteresis (394.5mV), OUTA goes low. When INA+ rises above 400mV, OUTA goes high-impedance (open-drain). This detects undervoltage conditions. (2) Comparator B (Overvoltage): The non-inverting input of Comparator B is internally connected to the 400mV reference. When the voltage at INB- (inverting) rises above 400mV plus hysteresis, OUTB goes low. When INB- drops below 400mV minus hysteresis, OUTB goes high-impedance. This detects overvoltage conditions. (3) Window Mode: By connecting both INA+ and INB- to the same monitored voltage through external resistor dividers, the device simultaneously detects both undervoltage (OUTA) and overvoltage (OUTB) conditions, creating a window comparator. (4) Threshold Setting: External resistor dividers scale the monitored voltage down to the 400mV threshold. The 0.25% reference accuracy ensures precise trip points. The 5.5mV hysteresis provides noise margin.

Pin Description: TLV6710DDCR Pin Definition and Functions
Pin Name Type Function
1 OUTA Output Comparator A output (open-drain, undervoltage)
2 GND Ground Ground
3 INA+ Input Comparator A non-inverting input
4 INB- Input Comparator B inverting input
5 VDD Power Supply (1.8V to 36V)
6 OUTB Output Comparator B output (open-drain, overvoltage)
Application Scenarios: In which products and applications is TLV6710DDCR used
  • Battery overvoltage and undervoltage protection with 400mV reference
  • Power supply window monitoring in industrial systems at 36V
  • Relay and circuit breaker control with open-drain 25V outputs
  • Door/window sensor and portable medical equipment at 7uA quiescent current
Alternative Models: What chips are recommended as replacements for TLV6710DDCR
Manufacturer Part Number Package Notes
TI TLV6711DDCR SOT-23-6 Single comparator version
TI LMV7239M5X/NOPB SOT-23-5 Single comparator, 2.5-5.5V
Microchip MIC833NYC5-T5 SOT-23-5 Window comparator, 2.5-16V
Maxim MAX9029AUT+T SOT-23-6 Dual comparator, nanopower

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1