Opens in a new tab

TLV71333PDBVR

300mA LDO, 3.3V fixed output, 150mV dropout, 25uA IQ, SOT-23-5

3824

Effective Inventory

Image for reference only

Manufacturer Part:

TLV71333PDBVR

Package:

SOT-23-5 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV71333PDBVR from Texas Instruments is a 300mA low-dropout linear regulator with fixed 3.3V output, ultra-low IQ of 25uA, and SOT-23-5 package, designed for portable and battery-powered applications.

Key Specifications

Output Voltage 3.3V fixed
Output Current 300mA
Input Voltage Range 1.4 to 5.5V
Dropout Voltage 150mV @ 300mA
Quiescent Current 25uA
PSRR 60dB @ 1kHz
Output Noise 32uVrms
Package SOT-23-5
Operating Temperature -40 to +125 C

Features

  • Ultra-low quiescent current of 25uA
  • Very low dropout voltage of 150mV at 300mA
  • High PSRR of 60dB at 1kHz
  • Stable with 1uF ceramic capacitors
  • Active discharge feature
  • Thermal shutdown and current limit protection

Applications

  • Portable battery-powered devices
  • Wearable electronics
  • Smartphones and tablets
  • IoT sensor nodes
Product Introduction: TLV71333PDBVR Product Introduction

The TLV71333PDBVR from Texas Instruments is a low-dropout (LDO) linear regulator providing a fixed 3.3V output at up to 300mA. It features an ultra-low quiescent current of only 25uA, making it ideal for battery-powered and always-on applications. The device operates with input voltages from 1.4V to 5.5V and achieves a low dropout voltage of 150mV at full 300mA load. High power-supply rejection ratio (PSRR) of 60dB at 1kHz ensures clean output voltage even from noisy input sources. The TLV713P is stable with just a 1uF ceramic output capacitor, minimizing board space. Built-in protection features include current limit, thermal shutdown, and an active output discharge function. The tiny SOT-23-5 package (2.9 x 1.6 x 1.1mm) is ideal for space-constrained designs.

Working Principle: TLV71333PDBVR Working Principle

The TLV71333PDBVR operates as a series-pass linear regulator with three key subsystems: (1) Bandgap reference – A precision bandgap voltage reference generates a stable 1.2V reference that is amplified and divided to produce the fixed 3.3V output. The reference is trimmed during manufacturing for tight initial accuracy. (2) Error amplifier and pass element – A P-channel MOSFET pass transistor is controlled by a high-gain error amplifier that compares a fraction of the output voltage with the internal reference. When the output drops below the target, the amplifier drives the PMOS gate lower, increasing current flow and restoring the output voltage. The P-channel architecture allows very low dropout since the gate can be driven to near ground. (3) Protection circuits – Current limiting protects against output shorts by sensing the pass element current. Thermal shutdown disables the output when junction temperature exceeds approximately 160C. An active discharge resistor on the output quickly discharges output capacitors when the regulator is disabled.

Pin Description: TLV71333PDBVR Pin Definition and Functions
Pin Name Function
1 OUT Regulated 3.3V output
2 GND Ground
3 EN Enable input (active high)
4 NC No connection
5 IN Input supply (1.4-5.5V)
Application Scenarios: In which products and applications is TLV71333PDBVR used
  • Portable battery-powered devices requiring 3.3V rail with 25uA quiescent current to extend battery life
  • Wearable electronics and fitness trackers using the tiny SOT-23-5 package
  • IoT sensor nodes with always-on rails leveraging high 60dB PSRR for noise-sensitive RF sections
  • Post-regulation after DC-DC converters needing clean 3.3V supply with only 1uF output capacitor
Alternative Models: What chips are recommended as replacements for TLV71333PDBVR
Model Manufacturer Key Difference
TLV70033DDCR TI Same specs, SOT-23-5, 200mA
AP2112K-3.3 Diodes Inc 600mA, higher dropout
RT9193-33GB Richtek 300mA, similar specs
NCP511SN33T1G onsemi 150mA, lower current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1