Opens in a new tab

TMC239A-SA

Microstepping stepper driver, SPI, ext MOSFET, TSSOP-28

3456

Effective Inventory

Image for reference only

Manufacturer Part:

TMC239A-SA

Package:

TSSOP-28 (9.7 x 4.4 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TMC239A-SA from Analog Devices (formerly Trinamic) is a smart high-current microstepping stepper motor driver IC with SPI interface and external MOSFET drive capability, enabling up to 64x microstepping in TSSOP-28 package.

Key Specifications

Motor Type Bipolar stepper motor
Architecture Dual full-bridge driver (external MOSFET)
Microstep Resolution 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64
Interface SPI + Step/Direction
MOSFET Drive 8 external N-channel MOSFETs
Gage Drive Current +/-50 mA gate drive per output
Supply Voltage 5V to 15V (logic), up to 60V (motor)
Protection Overcurrent, overtemperature, short circuit
Diagnostics SPI status register, fault flags
Package TSSOP-28 (SA suffix)
Operating Temperature -40 to +125 C

Features

  • Up to 1/64 microstepping for ultra-smooth motor motion
  • Drives 8 external N-channel MOSFETs for scalable motor current
  • SPI interface for parameter configuration and diagnostics
  • Integrated protection: overcurrent, overtemperature, short circuit
  • CoolStep adaptive current control for energy savings

Applications

  • Industrial CNC and 3D printer motor control
  • Precision positioning systems and robotics
  • Textile and packaging machinery
  • Laboratory automation equipment
  • High-power stepper motor drives
Product Introduction: TMC239A-SA Product Introduction

The TMC239A-SA from Analog Devices (formerly Trinamic/Maxim) is a smart high-current microstepping stepper motor driver IC in TSSOP-28 package. Unlike integrated MOSFET drivers, the TMC239A drives 8 external N-channel MOSFETs, allowing scalable motor current from a few amps to tens of amps depending on MOSFET selection. The device supports microstepping resolutions from full step to 1/64 step for ultra-smooth motion, with SPI interface for configuration and diagnostics. Integrated protection features include overcurrent detection, overtemperature shutdown, and short-circuit protection. The SA suffix denotes TSSOP-28 package.

Working Principle: TMC239A-SA Working Principle

The TMC239A-SA operates as a dual full-bridge stepper motor driver controller. (1) The internal DAC generates two sinusoidal current reference waveforms offset by 90 degrees (quadrature) for the two motor phases. The microstep resolution (1 to 1/64) determines the number of discrete steps per electrical cycle, with 1/64 providing 12,800 microsteps per revolution for a 200-step motor. (2) Each full-bridge output drives a pair of external N-channel MOSFETs in a half-bridge configuration. The gate driver provides +/-50mA drive current to switch the MOSFETs. The external MOSFET architecture allows the designer to select MOSFETs optimized for the specific motor current and voltage requirements, from 5A to 50A+ and 24V to 60V. (3) The SPI interface provides access to configuration registers for microstep resolution, current settings, and chopper parameters, as well as readback of diagnostic status including overcurrent, overtemperature, and short-circuit faults. The Step/Direction interface allows simple motion control without SPI during operation.

Pin Description: TMC239A-SA Pin Definition and Functions
Pin Group Name Function
1-4 BH2, BL2, AH2, AL2 Phase B high/low gate drives
5-8 BH1, BL1, AH1, AL1 Phase A high/low gate drives
9-12 SPI/STEP/DIR SPI bus, step, direction inputs
13-16 VCC/GND Power supply and ground
17-22 Sense/Config Current sense, reference, enable
23-28 Misc CLK, DIAG, FAULT, test pins
Application Scenarios: In which products and applications is TMC239A-SA used
  • Industrial CNC and 3D printer motor control with external high-power MOSFETs
  • Precision positioning systems and robotics with 1/64 microstep smoothness
  • Textile and packaging machinery with SPI diagnostics and protection
  • Laboratory automation equipment with scalable motor current via MOSFET selection
  • High-power stepper motor drives requiring external MOSFET architecture
Alternative Models: What chips are recommended as replacements for TMC239A-SA
Model Manufacturer Key Difference
TMC260A-SA ADI Higher gate drive, similar architecture
TMC5160A-SA ADI Integrated MOSFET driver, StealthChop
DRV8711DCPR TI External MOSFET, 1/256 microstep
L6470PD ST Integrated 5A MOSFET, SPI, 1/128
A4979KJP-T Allegro External MOSFET, 1/16 microstep

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1