Opens in a new tab

TMP411ADR

Remote+Local Temp Sensor, 1C Acc, N-Factor, SOIC-8

6543

Effective Inventory

Image for reference only

Manufacturer Part:

TMP411ADR

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TMP411ADR from Texas Instruments is a remote and local temperature sensor with 1C accuracy, N-factor and series resistance correction, and SOIC-8 package.

Key Specifications

Type Remote and Local Temperature Sensor with N-Factor Correction
Remote Accuracy +/-1C (max, +60C to +100C)
Local Accuracy +/-1.5C (max, +25C to +125C)
Resolution 0.0625C (12-bit)
Interface I2C/SMBus (2-wire)
Supply Voltage 1.7V to 3.6V (A version)
Supply Current 270 uA (typical, active); 3 uA (standby)
N-Factor Correction Yes (registers for remote transistor)
Series Resistance Cancellation Yes (auto, up to 300 Ohm)
Alert Functions THERM, THERM2, ALERT
Package SOIC-8 (D suffix)
Operating Temperature -40C to +125C

Features

  • +/-1C remote temperature accuracy (60C to 100C)
  • N-factor and series resistance correction for remote diode
  • 12-bit resolution (0.0625C)
  • Local and remote temperature monitoring
  • Programmable alert thresholds (THERM, ALERT)
  • I2C/SMBus compatible interface
  • 1.7V to 3.6V supply range

Applications

  • CPU/FPGA die temperature monitoring
  • Server thermal management
  • Industrial process temperature sensing
  • Notebook computer thermal protection
Product Introduction: TMP411ADR Product Introduction

The TMP411ADR from Texas Instruments is a dual-channel remote and local temperature sensor with built-in N-factor correction and series resistance cancellation in an SOIC-8 package. The A suffix indicates the 1.7V to 3.6V low-voltage version, D denotes the SOIC-8 package, and R indicates tape and reel. The TMP411 measures the temperature of a remote transistor junction (typically an embedded thermal diode in a CPU, GPU, or FPGA) with +/-1C accuracy from 60C to 100C, and a local temperature with +/-1.5C accuracy. The N-factor correction register allows calibration for different remote diode non-ideality factors (N-factor), compensating for process variations between different CPU/FPGA thermal diodes. The automatic series resistance cancellation removes errors caused by up to 300 Ohm of PCB trace resistance between the sensor and the remote diode, which is critical in large server boards with long trace runs. The 12-bit (0.0625C) resolution provides fine temperature granularity for thermal management algorithms. Multiple alert outputs (THERM, THERM2, ALERT) support tiered thermal throttling and shutdown strategies.

Working Principle: TMP411ADR Working Principle

The TMP411ADR measures remote temperature using a remote diode sensing technique. The device sources two different currents (I1 and I2, typically in a ratio of approximately 1:17) through the remote transistor diode and measures the resulting forward voltage drops (VF1 and VF2). The temperature is calculated from the difference: Delta_VF = VF2 – VF1 = (kT/q) x ln(I2/I1) x N, where k is Boltzmann’s constant, T is absolute temperature, q is electron charge, and N is the diode non-ideality factor. The N-factor correction register allows the user to program the actual N-factor of the remote diode (which varies between CPU manufacturers and process nodes), eliminating the measurement error caused by the assumption of an ideal N=1.006 diode. The series resistance cancellation works by sourcing three different currents and solving for the series resistance component, which adds a constant offset to both VF1 and VF2 measurements. By measuring at three current levels, the device can extract and subtract the IR drop, compensating for up to 300 Ohm of total series resistance. The local temperature is measured using an on-chip bandgap-based temperature sensor with 12-bit ADC conversion.

Pin Description: TMP411ADR Pin Definition and Functions
Pin Name Type Function
1 SDA I/O I2C/SMBus data (open-drain)
2 SCL Input I2C/SMBus clock
3 THERM2 Output Second thermal alert (open-drain)
4 GND Power Ground
5 ALERT Output Temperature alert (open-drain)
6 D- Input Remote diode cathode
7 D+ Input Remote diode anode
8 V+ Power Supply voltage (1.7-3.6V)
Application Scenarios: In which products and applications is TMP411ADR used
  • Server CPU die temperature monitoring with N-factor correction for Intel/AMD thermal diodes and 300 Ohm series resistance cancellation for long PCB traces
  • FPGA thermal management with THERM/THERM2 tiered throttling: THERM at 85C reduces clock, THERM2 at 100C triggers shutdown
  • Notebook GPU thermal protection with 0.0625C resolution for fan speed PID control loop
Alternative Models: What chips are recommended as replacements for TMP411ADR
Manufacturer Part Number Package Notes
TI TMP411BDR SOIC-8 3.15V-5.5V supply version
TI TMP431ADGST VSSOP-8 Smaller package, similar function
onsemi ADT7481ARMZ MSOP-10 Remote + local, similar accuracy
Maxim MAX6654MEE+ QSOP-16 Remote temp sensor, 1C accuracy
TI TMP451AQDCRQ1 SOT-23-6 Automotive, smaller package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1