Opens in a new tab

TNY266PN

TinySwitch-II 10W off-line switcher, 700V MOSFET, 132kHz w/ jitter, DIP-8

3211

Effective Inventory

Image for reference only

Manufacturer Part:

TNY266PN

Package:

DIP-8 (9.8 x 6.6 x 3.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TNY266PN from Power Integrations is a TinySwitch-II enhanced, energy-efficient, low-power off-line switcher in a DIP-8 package. It integrates a 700V power MOSFET with an ON/OFF controller, providing up to 10W output from 85-265VAC input with auto-restart, frequency jittering for reduced EMI, and simple ON/OFF control without loop compensation.

Key Specifications

Input Voltage Range 85VAC to 265VAC (universal)
Output Power (230VAC) Up to 15W (open frame)
Output Power (85-265VAC) Up to 10W (enclosed)
Internal MOSFET Voltage 700V
Switching Frequency 132kHz (with jitter)
Frequency Jitter ~10dB EMI reduction
Auto-Restart Built-in for short circuit/open loop
Line Undervoltage Detect Programmable (EN/UV pin)
Package DIP-8 (through-hole)
Operating Temperature -40°C to +150°C (junction)

Features

  • Fully integrated auto-restart for fault protection
  • Built-in circuitry eliminates audible noise
  • Programmable line undervoltage detect prevents power on/off glitches
  • Frequency jittering reduces EMI by ~10dB
  • 132kHz switching reduces transformer size
  • Simple ON/OFF control – no loop compensation needed
  • Lowest component count switcher solution
  • No bias winding required

Applications

  • Cell phone and PDA chargers
  • PC standby power supplies
  • Appliance auxiliary supplies
  • Industrial control power
  • Isolated AC-DC converters up to 15W
Product Introduction: TNY266PN Product Introduction

The TNY266PN from Power Integrations is part of the TinySwitch-II family of enhanced, energy-efficient, low-power off-line switchers. It integrates a 700V power MOSFET and ON/OFF controller in a single DIP-8 package, providing up to 10W output from universal 85-265VAC input. The device features built-in auto-restart for short circuit and open loop protection, frequency jittering for ~10dB EMI reduction, and simple ON/OFF control that eliminates the need for loop compensation. The 132kHz switching frequency allows use of small EF12.6 or EE13 transformer cores.

Working Principle: TNY266PN Working Principle

The TNY266PN uses a simple ON/OFF control scheme rather than traditional PWM. The EN/UV pin receives feedback from an optocoupler that monitors the output voltage. When the output voltage is below regulation, the controller enables switching cycles. When the output is above regulation, switching cycles are skipped. This hysteretic control eliminates the need for loop compensation and provides very fast transient response. The internal 700V MOSFET switches at 132kHz with frequency jittering to spread the switching harmonic energy, reducing EMI filter requirements. Auto-restart limits average output power during fault conditions to less than 2% of maximum.

Pin Description: TNY266PN Pin Definition and Functions
Pin Name Type Function
1 BYPASS Power Internal 5.8V supply bypass capacitor
2 SOURCE Power MOSFET source (primary side return)
3 SOURCE Power MOSFET source (primary side return)
4 EN/UV Input Enable / Undervoltage detect input
5-8 DRAIN Power MOSFET drain (high-voltage connection)
Application Scenarios: In which products and applications is TNY266PN used
  • Cell phone and PDA wall chargers (5V/1A to 5V/2A)
  • PC standby and auxiliary power supplies
  • Home appliance control board power supplies
  • Industrial control isolated low-power supplies
  • LED driver power supplies up to 15W
Alternative Models: What chips are recommended as replacements for TNY266PN
Manufacturer Part Number Package Notes
Power Integrations TNY264PN DIP-8 5W version, same family
Power Integrations TNY267PN DIP-8 15W version, same family
Power Integrations TNY275PN DIP-8 TinySwitch-III, higher power
Power Integrations LNK626PN DIP-8 LinkSwitch-XT2, up to 9W
ST VIPer12AS DIP-8 12W off-line switcher alternative

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1