Opens in a new tab

TPA6211A1TDGNRQ1

3.1W mono Class-AB audio amp, AEC-Q100, 2.5-5.5V, 4mA Iq, diff input, HVSSOP-8

7500

Effective Inventory

Image for reference only

Manufacturer Part:

TPA6211A1TDGNRQ1

Package:

HVSSOP-8 with PowerPAD (3.00 x 4.90 x 1.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPA6211A1TDGNRQ1 from Texas Instruments is an AEC-Q100 automotive-qualified 3.1W mono Class-AB fully differential audio power amplifier operating from 2.5V to 5.5V with 4mA quiescent current in an 8-pin HVSSOP PowerPAD package.

Key Specifications

Architecture Class-AB, Fully Differential
Output Power 3.1 W into 3 Ohm @ 5V, THD=10%
Supply Voltage 2.5 V to 5.5 V
Quiescent Current 4 mA typical @ 5V
Shutdown Current 0.01 uA typical
PSRR -80 dB @ 20Hz-2kHz
CMRR -63 dB
THD+N 0.03% @ 1kHz
Minimum Load 3 Ohm
External Components 3 minimum
AEC-Q100 Yes (Grade 2, -40 to 105°C)
Operating Temperature -40°C to +105°C
Package HVSSOP-8 with PowerPAD

Features

  • AEC-Q100 Grade 2 qualified 3.1W mono Class-AB audio amplifier
  • Fully differential design eliminates input coupling capacitors and reduces RF rectification
  • -80dB PSRR enables direct battery operation without external regulator
  • Only 3 external components needed with 4mA quiescent current

Applications

  • Automotive emergency call (eCall) and cluster chime audio
  • Driver notification and infotainment speaker drive
  • Portable and battery-powered audio applications
Product Introduction: TPA6211A1TDGNRQ1 Product Introduction

The TPA6211A1TDGNRQ1 from Texas Instruments is an AEC-Q100 Grade 2 qualified, 3.1W mono fully differential Class-AB audio power amplifier designed for automotive and portable applications. The device delivers 3.1W into a 3-ohm speaker from a 5V supply at 10% THD. The fully differential architecture eliminates two input coupling capacitors and provides -63dB CMRR, reducing susceptibility to RF noise and ground-loop interference common in automotive environments. The -80dB PSRR from 20Hz to 2kHz allows direct operation from the vehicle battery supply without a separate voltage regulator. The device requires only three external components (input resistor, bypass capacitor, and output filter) for basic operation. The 4mA quiescent current and 0.01uA shutdown current minimize battery drain. The Q1 suffix indicates automotive qualification per AEC-Q100 Grade 2 (-40C to +105C). The DGN package is an 8-pin HVSSOP with exposed PowerPAD for thermal management.

Working Principle: TPA6211A1TDGNRQ1 Working Principle

The TPA6211A1TDGNRQ1 operates as a fully differential Class-AB audio power amplifier. (1) Fully Differential Architecture: The amplifier has differential inputs (IN+ and IN-) and differential outputs (OUT+ and OUT-). The differential output voltage is VOUT = (IN+ – IN-) x Gain. The common-mode feedback circuit biases both outputs at VDD/2, ensuring symmetric output swing. (2) Class-AB Output: The output stage uses complementary NPN and PNP transistors in a push-pull configuration. Class-AB biasing eliminates crossover distortion while maintaining reasonable efficiency. The output can drive speakers as low as 3 ohms. (3) Differential Advantage: The -63dB CMRR means that common-mode noise on the input lines is rejected, eliminating the need for input coupling capacitors. The differential output doubles the voltage swing compared to single-ended, providing 4x the output power for the same supply voltage. (4) PSRR: The -80dB power supply rejection ensures that battery voltage ripple and noise do not appear at the speaker output, eliminating the need for a separate low-noise supply.

Pin Description: TPA6211A1TDGNRQ1 Pin Definition and Functions
Pin Name Function
1 IN+ Non-inverting input
2 IN- Inverting input
3 SHUTDOWN Shutdown control (high=off)
4 BYPASS Internal midpoint bypass
5 OUT+ Differential output +
6 VDD Power supply (2.5-5.5V)
7 GND Ground
8 OUT- Differential output –
Application Scenarios: In which products and applications is TPA6211A1TDGNRQ1 used
  • Automotive eCall and cluster chime audio amplifier at 3.1W
  • Driver notification speaker drive with AEC-Q100 qualification
  • Portable and battery-powered audio with only 3 external components
Alternative Models: What chips are recommended as replacements for TPA6211A1TDGNRQ1
Manufacturer Part Number Package Notes
TI TPA6211A1TDGNR HVSSOP-8 Non-automotive version
TI TPA2005D1DRBR QFN-8 1.1W, Class-D, smaller
NXP TFA9887UK QFN-32 Smart amp, higher power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1