Opens in a new tab

Home » Integrated Circuits ICs, Sensors » TPD2E2U06QDBZRQ1

TPD2E2U06QDBZRQ1

2-channel ESD protection, 5.5V, automotive, SOT-23-3

7276

Effective Inventory

Image for reference only

Manufacturer Part:

TPD2E2U06QDBZRQ1

Package:

SOT-23-3 (2.90 x 1.60 x 1.10 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

TPD2E2U06QDBZRQ1 Overview

The TPD2E2U06QDBZRQ1 is an automotive-grade dual-channel ESD protection diode from Texas Instruments, with 5.5V working voltage, only 1.5pF line capacitance, and +/-15kV IEC ESD withstand capability in an ultra-small SOT-23-3 package, ideal for USB, UART and other high-speed interface protection.

Key Features

  • Dual-channel ESD protection
  • Working voltage: 5.5V
  • Line capacitance: 1.5pF (typical)
  • ESD protection: +/-15kV (IEC 61000-4-2)
  • Clamping voltage: 12V (IPP=3A)
  • AEC-Q100 qualified
  • Operating temperature: -40C to 125C
Product Introduction: TPD2E2U06QDBZRQ1 Product Introduction

The TPD2E2U06QDBZRQ1 is an automotive-qualified dual-channel ESD protection diode from Texas Instruments in a 3-pin SOT-23 (DBZ) package, designed for high-speed data line protection. It features ultra-low 0.35 pF typical channel capacitance supporting data rates beyond 1 Gbps, 3.6 V working voltage, and IEC 61000-4-2 ESD protection up to plus or minus 15 kV contact discharge. The AEC-Q100 qualification ensures automotive-grade reliability. The low clamping voltage of 6.5 V at 3 A minimizes stress on protected ICs, and the bidirectional TVS topology protects against both positive and negative transients.

Working Principle: TPD2E2U06QDBZRQ1 Working Principle

The TPD2E2U06QDBZRQ1 uses bidirectional TVS (transient voltage suppression) diodes to clamp ESD and surge events on two protected data lines to a safe voltage level. In normal operation, the TVS diodes present only their extremely low junction capacitance (0.35 pF typical) to the protected lines, which is negligible even for multi-GHz signals and maintains signal integrity and eye diagram quality for USB 3.0, HDMI, and other high-speed interfaces. When an ESD or electrical fast transient (EFT) event occurs, the TVS diode rapidly avalanches and conducts the transient current to the GND pin, clamping the line voltage to 6.5 V at 3 A (IEC 61000-4-2, 8 kV contact). The bidirectional structure provides symmetric clamping for both positive and negative transients without requiring a directional bias. The device responds in sub-nanosecond time, faster than the rise time of IEC ESD waveforms. The SOT-23 package minimizes parasitic inductance, reducing voltage overshoot during fast ESD events. The automotive AEC-Q100 Grade 1 qualification ensures reliable operation from -40 C to +125 C with zero defects per million production quality.

Pin Description: TPD2E2U06QDBZRQ1 Pin Definition and Functions
Pin Name Description
1 I/O 1 ESD protected I/O line 1; connect to data line near connector
2 GND Ground; connect directly to PCB ground plane via shortest path
3 I/O 2 ESD protected I/O line 2; connect to complementary data line

Package: SOT-23 (DBZ). Dimensions: 2.92 x 2.37 x 1.12 mm. Place as close as possible to the connector or ESD entry point for maximum protection effectiveness. Keep GND trace short and wide to minimize parasitic inductance.

Application Scenarios: In which products and applications is TPD2E2U06QDBZRQ1 used
  • Automotive USB Ports: ESD protection for in-vehicle USB 2.0 data and power lines with AEC-Q100 qualification
  • Infotainment System Interfaces: Protecting high-speed LVDS and SDIO lines in head units and display controllers
  • ADAS Camera Links: ESD clamping on GMSL or FPD-Link III differential pairs in camera modules
  • Industrial USB: ESD and EFT protection for USB 2.0 ports in factory equipment
  • Consumer Electronics: Low-capacitance ESD protection for HDMI, DisplayPort, and USB 3.0 interfaces
Alternative Models: What chips are recommended as replacements for TPD2E2U06QDBZRQ1
Model Manufacturer Cj VRWM ESD Rating AEC-Q100 Package
TPD2E2U06QDBVRQ1 Texas Instruments 0.35 pF 3.6 V +/-15 kV Yes SOT-23
PESD2USB5-AX Nexperia 0.5 pF 5.0 V +/-15 kV No SOD-323
ESD1014MUTAG onsemi 3.8 pF 3.3 V 30 kV Yes UDFN-10
TCKE812NA Panasonic 0.3 pF 5.5 V +/-15 kV No DFN-4
PRTR5V0U2X NXP 0.9 pF 5.0 V +/-8 kV No SOT-143

TPD2E2U06QDBZRQ1 is an AEC-Q100 automotive dual-channel ESD protection device from TI in SOT-23-3 with 1.5pF capacitance and ±25kV IEC 61000-4-2 contact discharge. The TPD2E2U06QDBVRQ1 is the smaller DFB variant. TPD4E05U06DQAR provides 4-channel protection. PRTR5V0U2X from Nexperia offers 2-channel ESD for USB 2.0 with 1pF capacitance. For non-automotive use, TPD2E2U06DBVR removes the AEC-Q100 requirement at lower cost.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1