Opens in a new tab

TPS22929DDBVT

1.8A load switch, 1.4-5.5V, 115mOhm, controlled slew, QOD, SOT-23-6

2251

Effective Inventory

Image for reference only

Manufacturer Part:

TPS22929DDBVT

Package:

SOT-23-6 (2.90 x 1.60 x 1.20 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS22929DDBVT from Texas Instruments is a 5.5V, 1.8A load switch with controlled turn-on and Quick Output Discharge in a SOT-23-6 (DBV) package. Operating from 1.4V to 5.5V, it provides power sequencing and rail management for multi-rail systems.

Key Specifications

Input Voltage 1.4 V to 5.5 V
On-Resistance 115 mOhm (max) at 5V
Continuous Current 1.8 A
Turn-On Time 700 us (typical)
QOD Resistance 150 Ohm (typical)
Operating Temperature -40C to +85C

Features

  • 115mOhm on-resistance for minimal voltage drop
  • Controlled slew-rate turn-on (700us) limits inrush current
  • Quick Output Discharge (QOD) for fast rail discharge
  • Undervoltage lockout (UVLO) for safe operation
  • Reverse current protection

Applications

  • Power rail sequencing and management
  • Battery-powered system load switching
  • Hot-swap power management
  • USB and peripheral power control
Product Introduction: TPS22929DDBVT Product Introduction

The TPS22929DDBVT from Texas Instruments is a 1.8A load switch with controlled turn-on and Quick Output Discharge in a SOT-23-6 (DBV) package. Operating from 1.4V to 5.5V, the N-channel MOSFET switch provides 115mOhm maximum on-resistance at 5V. The controlled slew-rate turn-on of 700us typical limits inrush current into capacitive loads, preventing voltage droops on the input rail. The Quick Output Discharge (QOD) feature connects a 150 Ohm internal resistor from output to ground when the switch is off, ensuring the output rail discharges quickly for predictable power-down sequencing. Undervoltage lockout (UVLO) keeps the switch off when the input voltage is below the threshold, and reverse current protection prevents current flow from output to input.

Working Principle: TPS22929DDBVT Working Principle

The TPS22929DDBVT uses an N-channel MOSFET with charge pump and controlled turn-on. (1) N-Channel Switch: An N-channel MOSFET provides the low 115mOhm on-resistance. A charge pump generates the gate voltage above VIN to fully enhance the MOSFET. (2) Controlled Turn-On: When EN goes high, the gate voltage is ramped gradually over 700us, limiting the inrush current into the load capacitance. This controlled slew rate prevents voltage droops on the input rail. (3) QOD: When the switch turns off, an internal 150 Ohm resistor connects the output to ground, discharging the output capacitance. This ensures the output rail reaches 0V quickly for predictable power-down behavior. (4) UVLO: When VIN drops below the UVLO threshold (approximately 1.2V), the switch is forced off regardless of EN state. (5) Reverse Current Protection: An internal comparator detects when VOUT > VIN and turns off the switch to prevent reverse current flow.

Pin Description: TPS22929DDBVT Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (1.4-5.5V)
2 GND Ground Ground
3 EN Input Enable (active high)
4 NC – No connect
5 VOUT Output Switch output to load
6 NC – No connect
Application Scenarios: In which products and applications is TPS22929DDBVT used
  • Power rail sequencing and management with controlled turn-on slew rate
  • Battery-powered system load switching with 115mOhm minimal voltage drop
  • Hot-swap power management with QOD for fast rail discharge
  • USB and peripheral power control with inrush current limiting
Alternative Models: What chips are recommended as replacements for TPS22929DDBVT
Manufacturer Part Number Package Notes
TI TPS22917DBVR SOT-23-6 5.5V, 2A, similar function
TI TPS22959DNYT WSON-8 5.5V, 15A, higher current
onsemi NCP45520IMNTWG DFN-6 5.5V, 4A load switch
Vishay SiP32431 TSOT-6 5.5V, 2A load switch

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1