Opens in a new tab

TPS2561DRCR

Dual-channel 250mA-2.8A adjustable current-limited power switch, 44mΩ, USB, VSON-10

3199

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2561DRCR

Package:

VSON-10 (DRC) (3.0 x 3.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS2561DRCR from Texas Instruments is a dual-channel precision adjustable current-limited power switch with active-high enable. Supporting 2.5V to 6.5V operation, each channel provides an adjustable current limit from 250mA to 2.8A via external resistor, with 44mΩ on-resistance MOSFETs and 3.5µs overcurrent response time in a VSON-10 package.

Key Specifications

Channels 2 (independent)
Current Limit Range 250mA to 2.8A (adjustable)
Current Limit Accuracy ±7.5% at 2.8A
On-Resistance 44 mΩ per channel
Supply Voltage 2.5V to 6.5V
Overcurrent Response 3.5 µs (typ)
Standby Current 2 µA (max)
Operating Temperature -40°C to +125°C
Package VSON-10 (3.0 x 3.0 mm)

Features

  • Dual independent current-limiting channels
  • Adjustable current limit: 250mA to 2.8A per channel
  • ±7.5% current-limit accuracy at 2.8A
  • Fast overcurrent response: 3.5µs typical
  • Two 44mΩ high-side N-channel MOSFETs
  • Built-in soft-start to minimize inrush current
  • 15kV/8kV system-level ESD capability
  • UL listed (E169910), CB and Nemko certified
  • Independent FAULT outputs per channel

Applications

  • USB port power distribution
  • USB hubs and host controllers
  • Digital TV set-top boxes
  • VoIP phones
  • Hot-plug power management
Product Introduction: TPS2561DRCR Product Introduction

The TPS2561DRCR is a dual-channel power distribution switch from Texas Instruments designed for applications requiring precision current limiting. Each channel features an adjustable current limit from 250mA to 2.8A (set via external resistor) with ±7.5% accuracy, a 44mΩ high-side MOSFET, and independent enable/FAULT pins. The 3.5µs overcurrent response time protects against short circuits and heavy capacitive loads. Built-in soft-start minimizes inrush current during turn-on. The device meets USB current-limiting requirements and is UL listed, CB and Nemko certified.

Working Principle: TPS2561DRCR Working Principle

The TPS2561 operates through four key subsystems: (1) Current Limiting: Each channel has a precision current-sense amplifier that compares the MOSFET current against the limit set by an external resistor on the ILIM pin. When the limit is exceeded, the device transitions to constant-current mode within 3.5µs. (2) Power Switch: A 44mΩ N-channel MOSFET per channel provides the power path, controlled by the EN pin. The soft-start circuit controls the MOSFET gate voltage ramp to limit inrush current into capacitive loads. (3) Fault Reporting: Each channel has an independent open-drain FAULT output that asserts low during overcurrent or overtemperature conditions. (4) Protection: Thermal shutdown protects against excessive power dissipation, and the device includes 15kV/8kV system-level ESD protection on the output pins.

Pin Description: TPS2561DRCR Pin Definition and Functions
Pin Name Type Description
1 EN1 Input Channel 1 enable (active-high)
2 ILIM1 Input Channel 1 current limit set resistor
3 IN Power Input supply voltage (2.5V to 6.5V)
4 OUT1 Output Channel 1 output
5 FAULT1 Output Channel 1 fault indicator (open-drain)
6 FAULT2 Output Channel 2 fault indicator (open-drain)
7 OUT2 Output Channel 2 output
8 GND Ground Ground
9 ILIM2 Input Channel 2 current limit set resistor
10 EN2 Input Channel 2 enable (active-high)
Application Scenarios: In which products and applications is TPS2561DRCR used
  • Dual USB port power distribution with per-port current limiting
  • USB hub and host controller power switching
  • Set-top box peripheral power management
  • Hot-plug power supply protection for removable modules
  • VoIP phone and networking equipment power distribution
Alternative Models: What chips are recommended as replacements for TPS2561DRCR
Model Manufacturer Channels ILIM Range Notes
TPS2560DRCR TI 2 250mA-2.8A Active-low enable
TPS2549RTER TI 1 Up to 2.5A USB charging port controller
AP2145SG-13 Diodes Inc 2 Fixed Lower cost dual switch
MIC2026-2YM Microchip 2 Fixed 500mA USB dual switch

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1