Opens in a new tab

TPS26600PWPR

60V industrial eFuse, 0.6-5A prog current limit, rev polarity prot, HTSSOP-20

13969

Effective Inventory

Image for reference only

Manufacturer Part:

TPS26600PWPR

Package:

HTSSOP-20 / PWP (6.50 x 4.40 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS26600PWPR from Texas Instruments is an industrial eFuse (electronic fuse) with 60V operating voltage and 0.6-5A programmable current limit. It provides reverse polarity protection, overvoltage protection, and hot-swap/inrush current control. With 47 mOhm on-resistance and integrated MOSFET, it replaces discrete protection circuits in a 20-pin HTSSOP package rated for -40 to 125 C.

Key Specifications

Type Industrial eFuse / Hot-Swap Controller
Operating Voltage 4.2V – 60V
Current Limit 0.6A – 5A (programmable)
On-Resistance 47 mOhm (typ at 48V)
Overvoltage Protection Programmable (OVP)
Undervoltage Lockout Programmable (UVLO)
Reverse Polarity Protection Yes (-60V)
Inrush Current Control Yes (dV/dt slew rate)
Package HTSSOP-20 (PWP)
Operating Temp -40 to 125 C

Features

  • 60V operating range for industrial 24V/48V systems
  • Programmable current limit: 0.6A to 5A via external resistor
  • Integrated 47 mOhm power MOSFET for low voltage drop
  • Reverse polarity protection to -60V without external diode
  • Programmable overvoltage and undervoltage thresholds
  • Adjustable output slew rate for inrush current control
  • Auto-retry or latch-off fault response
  • Power Good and Fault status outputs

Applications

  • Industrial 24V/48V DC hot-swap power protection
  • PLC and DCS I/O module power path protection
  • Motor drive and inverter pre-charge circuits
  • Server and telecom -48V distribution
  • Battery management system protection
Product Introduction: TPS26600PWPR Product Introduction

The TPS26600PWPR from Texas Instruments is a 60V industrial eFuse providing comprehensive power path protection in a single IC. It integrates a 47 mOhm power MOSFET with programmable current limiting (0.6A to 5A), reverse polarity protection to -60V, overvoltage and undervoltage lockout, and adjustable inrush current control via output voltage slew rate. The device replaces discrete protection circuits including fuses, diodes, and MOSFETs with associated control circuitry, reducing BOM count and board space. It supports both auto-retry and latch-off fault response modes.

Working Principle: TPS26600PWPR Working Principle

The TPS26600PWPR integrates an N-channel power MOSFET with a charge pump gate driver and comprehensive protection circuits. During startup, the gate driver controls the MOSFET slew rate (programmed via a capacitor on the dV/dt pin) to limit inrush current into the output capacitor. The current limit circuit senses the MOSFET current and compares it to the programmed threshold (set via ILIM resistor); when exceeded, the gate voltage is regulated to maintain the current at the limit. Reverse polarity protection uses an internal comparator to detect negative VIN and opens the MOSFET to block reverse current flow without requiring an external series diode. The UVLO/OVP comparators monitor the input voltage and disable the MOSFET when outside the programmed window.

Pin Description: TPS26600PWPR Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (4.2-60V)
2-5 VIN Power Input supply (multiple pins)
6 UVLO Input Undervoltage lockout programming
7 OVP Input Overvoltage protection programming
8 ILIM Input Current limit programming
9 dVdt Input Slew rate programming capacitor
10 GND Ground Ground
11 PG/FLT Output Power Good / Fault status
12 MODE Input Fault response mode select
13 EN/UV Input Enable / undervoltage
14-17 VOUT Power Output supply (multiple pins)
18-20 Misc – IMON, RT, NC
Application Scenarios: In which products and applications is TPS26600PWPR used
  • Industrial hot-swap: 24V/48V live insertion protection for PLC I/O modules
  • Power distribution: eFuse protection in -48V telecom and server racks
  • Motor drives: Pre-charge and reverse polarity protection for inverter DC-link
  • Battery systems: Overcurrent and reverse polarity in BMS power paths
  • Factory automation: Robust power path protection for DIN-rail modules
Alternative Models: What chips are recommended as replacements for TPS26600PWPR
Manufacturer Part Number Package Notes
TI TPS26620PWPR HTSSOP-20 Higher current (7.5A) variant
TI TPS25940ARVCR VQFN-20 60V eFuse, 5A, similar function
Analog Devices LTC4365CTS8 TSOT-23-8 Overvoltage/rev polarity protector, no current limit
onsemi NIS5452MNT1G DFN-10 12V eFuse, 6A, computing focused

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1