Opens in a new tab

Home » Low Dropout Regulators (LDO) » TPS386596L33DGKR

TPS386596L33DGKR

4-ch voltage supervisor, 2.9V fixed + 3x adj, 0.25% accuracy, 7uA Iq, manual reset, VSSOP-8

7620

Effective Inventory

Image for reference only

Manufacturer Part:

TPS386596L33DGKR

Package:

VSSOP-8 (3.00 x 3.00 x 0.95 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS386596L33DGKR from Texas Instruments is a quad-channel voltage supervisor with manual reset input in an 8-pin VSSOP package. SVS-1 monitors a fixed 2.9V threshold for 3.3V rails, while SVS-2/3/4 are adjustable down to 0.4V with 0.25% typical threshold accuracy.

Key Specifications

Monitored Voltages 4 channels
SVS-1 Threshold 2.9V fixed (for 3.3V rail)
SVS-2/3/4 Threshold Adjustable down to 0.4V
Threshold Accuracy 0.25% typical
Reset Delay 50 ms fixed
Manual Reset Active-low MR input
Quiescent Current 7 uA typical
Supply Voltage 1.8 V to 6.5 V
Reset Output Open-drain, active-low
Operating Temperature -40°C to +125°C
Package VSSOP-8 (3.0mm x 3.0mm)

Features

  • Four-channel voltage monitoring with one fixed 2.9V and three adjustable thresholds
  • 0.25% typical threshold accuracy for precise voltage monitoring
  • Ultra-low 7uA quiescent current for battery-powered applications
  • Active-low manual reset input with internal 100k pull-up
  • Fixed 50ms reset timeout with open-drain active-low RESET output

Applications

  • FPGA and processor multi-rail power monitoring
  • Multi-voltage system supervision in industrial equipment
  • Power supply sequencing and reset generation
Product Introduction: TPS386596L33DGKR Product Introduction

The TPS386596L33DGKR from Texas Instruments is a quad-channel voltage supervisor that monitors four power rails and asserts the RESET signal when any SENSE input drops below its respective threshold. SVS-1 monitors a 3.3V nominal power supply with a fixed 2.9V threshold, requiring no external components. SVS-2, SVS-3, and SVS-4 are adjustable using external resistor dividers and can monitor any supply voltage higher than 0.4V. All SENSE inputs feature 0.25% typical threshold accuracy. The device includes an active-low manual reset (MR) input with an internal 100k pull-up to VDD and a 50ns deglitch circuit. The open-drain active-low RESET output deasserts after a fixed 50ms delay, suitable for connecting to processor reset inputs or regulator enable pins. The ultra-low 7uA quiescent current makes it ideal for battery-powered applications.

Working Principle: TPS386596L33DGKR Working Principle

The TPS386596L33DGKR monitors four power supply rails using precision comparators. (1) Fixed Threshold (SVS-1): An internal resistor divider sets the SENSE1 threshold at 2.9V for monitoring 3.3V rails. When SENSE1 drops below 2.9V, the comparator output asserts RESET. (2) Adjustable Threshold (SVS-2/3/4): External resistor dividers scale the monitored voltage down to the internal 0.4V reference. The target trip voltage is calculated as V_target = (1 + RSnH/RSnL) x 0.4V. (3) Reset Logic: A NOR gate combines all four comparator outputs and the MR input. If any input indicates a fault, RESET is asserted low. RESET is released only when all SENSE inputs are above their thresholds and MR is high, after a fixed 50ms timeout. (4) Manual Reset: The MR pin allows firmware or external logic to initiate a reset. An internal 100k pull-up holds MR high when unconnected. A 50ns deglitch filter prevents noise from triggering false resets.

Pin Description: TPS386596L33DGKR Pin Definition and Functions
Pin Name Function
1 VDD Supply voltage (1.8-6.5V)
2 SENSE1 Fixed 2.9V threshold input (3.3V rail)
3 SENSE2 Adjustable threshold input
4 GND Ground
5 RESET Open-drain reset output (active low)
6 MR Manual reset input (active low, internal pull-up)
7 SENSE4 Adjustable threshold input
8 SENSE3 Adjustable threshold input
Application Scenarios: In which products and applications is TPS386596L33DGKR used
  • FPGA multi-rail voltage monitoring (3.3V, 1.5V, 1.2V, 1.0V) in VSSOP-8
  • Processor power-on reset generation with manual reset override
  • Industrial system multi-voltage supervision with 0.25% accuracy
Alternative Models: What chips are recommended as replacements for TPS386596L33DGKR
Manufacturer Part Number Package Notes
TI TPS386596L33DGKT VSSOP-8 Smaller reel (250pcs)
TI TPS3823-33DBVR SOT-23-5 Single channel, 3.3V
onsemi NCP303LSN27T1G TSOP-5 Single channel, 2.7V

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1