Opens in a new tab

TPS40210DRCR

4.5-52V boost controller, 6A, 35kHz-1MHz, current mode, 10-VSON

6506

Effective Inventory

Image for reference only

Manufacturer Part:

TPS40210DRCR

Package:

10-VSON (DRC) (3.0 × 3.0 × 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS40210DRCR from Texas Instruments is a wide-input voltage (4.5 V to 52 V), non-synchronous current-mode boost controller in a 10-pin VSON package. It is suitable for boost, flyback, SEPIC, and LED driver topologies requiring a grounded-source N-channel MOSFET, featuring programmable soft start, overcurrent protection with automatic retry, and programmable oscillator frequency from 35 kHz to 1 MHz.

Key Specifications

  • Input Voltage Range: 4.5 V to 52 V
  • Output Voltage: 5 V to 60 V (boost)
  • Maximum Duty Cycle: 95%
  • Switch Current Limit: 6 A (external FET)
  • Reference Voltage: 700 mV (TPS40210)
  • Switching Frequency: 35 kHz to 1 MHz (programmable)
  • Current Mode Control with Internal Slope Compensation
  • Operating Temperature: -40°C to +125°C
  • Package: 10-pin VSON (DRC) (3 × 3 × 0.9 mm), MSL 2

Features

  • Integrated low-side N-channel MOSFET driver
  • Programmable closed-loop soft start
  • Overcurrent protection with automatic retry
  • External synchronization capable
  • Low current disable function
  • Current mode control for improved transient response

Applications

  • LED lighting drivers
  • Industrial control systems
  • Battery-powered boost converters
  • SEPIC and flyback converters
  • Automotive power systems
Product Introduction: TPS40210DRCR Product Introduction

The TPS40210DRCR is a wide-input voltage non-synchronous boost controller from Texas Instruments designed for boost, flyback, SEPIC, and LED driver applications. Operating from 4.5 V to 52 V input, it drives an external grounded-source N-channel MOSFET with an integrated low-side driver. Current mode control provides improved transient response and simplified loop compensation, while internal slope compensation ensures stability at high duty cycles. The device features programmable soft start, overcurrent protection with automatic retry, and a programmable oscillator frequency from 35 kHz to 1 MHz. The 700 mV reference voltage (TPS40210 vs 260 mV for TPS40211) suits high-side current sensing applications. The compact 10-pin VSON package minimizes board space in power designs.

Working Principle: TPS40210DRCR Working Principle

The TPS40210 uses peak current-mode control to regulate the output voltage. An external current-sense resistor in the MOSFET source path provides switch current information to the internal PWM comparator. The error amplifier compares the divided output voltage against the 700 mV reference, generating a COMP signal that sets the peak current threshold. An internal oscillator sets the switching frequency, and the ramp signal provides slope compensation for stable operation above 50% duty cycle. The integrated gate driver directly drives an external N-channel MOSFET. Soft start is achieved by ramping the COMP voltage slowly at startup. Overcurrent protection is implemented by monitoring the current-sense voltage; when exceeded, the device enters an automatic retry cycle after a cool-down period.

Pin Description: TPS40210DRCR Pin Definition and Functions
Pin Name Description
1 SS Soft Start Capacitor
2 COMP Error Amplifier Output / Compensation
3 FB Feedback Voltage Input (700 mV ref)
4 DIS/EN Disable / Enable Input
5 ISNS Current Sense Input
6 GND Ground
7 GDRV Gate Drive Output (to external NFET)
8 BP Internal 8 V Regulator Output / Bypass
9 VDD Input Supply Voltage (4.5-52 V)
10 RC Frequency Set Resistor / Capacitor
Pad GND Exposed Thermal Pad (GND)
Application Scenarios: In which products and applications is TPS40210DRCR used
  • LED Lighting: Constant-current LED driver using boost topology with output current regulation via sense resistor
  • Industrial Power Supplies: Wide-input boost converters for 12V/24V/48V bus to higher voltage rails
  • SEPIC Converters: Buck-boost regulation for battery-powered systems with input voltage above or below output
  • Flyback Converters: Isolated power supply with grounded-source NFET topology for simplified bias
  • Automotive Systems: 12V battery to 24V/48V boost for automotive LED lighting and infotainment
Alternative Models: What chips are recommended as replacements for TPS40210DRCR
Model Brand Vin (V) Fsw (kHz) Ref (mV)
TPS40211DRCR TI 4.5-52 35-1000 260
LM5022 TI 6-60 50-1000 500
UC3843B TI 8-36 500 2500
NCP3066 onsemi 3-40 250 235
LTC3757 ADI 3.5-40 100-1000 800

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1