Opens in a new tab

TPS4H000AQPWPRQ1

Quad smart high-side switch, 40V, 600mA/ch, programmable I-limit, SPI diag, AEC-Q100

2488

Effective Inventory

Image for reference only

Manufacturer Part:

TPS4H000AQPWPRQ1

Package:

HTSSOP-20 (PWP, 6.5 x 4.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS4H000AQPWPRQ1 from Texas Instruments is an automotive-qualified quad-channel smart high-side switch with integrated diagnostics. Each channel supports up to 600mA continuous current with 500 mOhm on-resistance at a 40V supply. It features programmable current limiting, open-load detection, and SPI diagnostics in a 20-pin HTSSOP package, qualified to AEC-Q100 Grade 1.

Key Specifications

Type Quad Smart High-Side Switch
Channels 4
Supply Voltage 4.5V – 40V
On-Resistance (per ch) 500 mOhm (typ)
Current per Channel 600 mA (continuous)
Current Limit 100-600 mA (programmable)
Interface Parallel input + SPI diagnostics
Package HTSSOP-20 (PWP)
Operating Temp -40 to 150 C (Tj)
Qualification AEC-Q100 Grade 1

Features

  • AEC-Q100 Grade 1 qualified (-40 to 150 C Tj)
  • 4 independent high-side switch channels
  • Programmable current limiting per channel (100-600 mA)
  • Open-load detection in both on and off states
  • Over-current and thermal shutdown protection
  • SPI interface for diagnostics and fault reporting
  • Reverse polarity protection
  • Inductive load clamp capability

Applications

  • Automotive LED lighting control
  • Solenoid and relay driving
  • Automotive sensor power supply
  • Body electronics and ECU outputs
  • Industrial high-side switching
Product Introduction: TPS4H000AQPWPRQ1 Product Introduction

The TPS4H000AQPWPRQ1 from Texas Instruments is an automotive-qualified quad-channel smart high-side power switch with comprehensive diagnostics. Each of the four channels supports up to 600mA continuous current with 500 mOhm typical on-resistance at 40V supply. The device integrates programmable per-channel current limiting (100-600 mA), open-load detection, over-current protection, and thermal shutdown with warning. An SPI interface provides detailed fault status reporting. AEC-Q100 Grade 1 qualification ensures reliable operation up to 150 C junction temperature, making it suitable for demanding automotive body electronics.

Working Principle: TPS4H000AQPWPRQ1 Working Principle

The TPS4H000AQPWPRQ1 integrates four independent N-channel MOSFET high-side switches with associated gate drivers and protection circuits. Each channel is controlled by a parallel input pin for fast on/off switching. The internal gate driver charges the MOSFET gate from an internal charge pump. Current limiting is implemented by sensing the MOSFET drain current and comparing it to a programmable threshold set via an external resistor. Open-load detection uses a small pull-up current source to detect disconnected loads. The SPI interface reads fault registers providing per-channel diagnostic information.

Pin Description: TPS4H000AQPWPRQ1 Pin Definition and Functions
Pin Name Type Function
1 IN1 Input Channel 1 control
2 IN2 Input Channel 2 control
3 GND Ground Ground
4 OUT2 Output Channel 2 output to load
5 OUT1 Output Channel 1 output to load
6 VS Power Supply voltage (4.5-40V)
7 OUT3 Output Channel 3 output to load
8 OUT4 Output Channel 4 output to load
9 IN3 Input Channel 3 control
10 IN4 Input Channel 4 control
11-20 SPI/CTRL I/O SPI interface and control
Application Scenarios: In which products and applications is TPS4H000AQPWPRQ1 used
  • Automotive LED headlight and taillight control
  • Solenoid and relay driver outputs in ECUs
  • Sensor power supply switching in body electronics
  • Industrial 24V high-side switching applications
Alternative Models: What chips are recommended as replacements for TPS4H000AQPWPRQ1
Manufacturer Part Number Package Notes
TI TPS4H160AQPWPRQ1 HTSSOP-20 Quad, 1.6A per channel
Infineon BTS7002-1EPP PG-DSO-8 Single ch, 30A, PROFET
NXP MC10XS6400EK PowerQFN-24 Quad, 600mA, eSwitch
ST VN5E160MSTR-E PowerSSO-12 Quad, 600mA, VIPower

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1