Opens in a new tab

TPS51116RGER

DDR power solution, VDDQ buck + 3A VTT LDO + VTTREF, VQFN-24

8796

Effective Inventory

Image for reference only

Manufacturer Part:

TPS51116RGER

Package:

VQFN-24 (4.0 x 4.0 x 0.88 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS51116RGER from Texas Instruments is a complete DDR/DDR2/DDR3/DDR3L/LPDDR3/DDR4 memory power solution in a 24-pin VQFN package. It integrates a synchronous buck controller for VDDQ, a 3A sink/source LDO for VTT, and a buffered low-noise reference for VTTREF, supporting all DDR sleep state controls.

Key Specifications

Buck Controller (VDDQ) Synchronous, D-CAP or current mode
VDDQ Output Range 0.75V to 3.0V (2.5V/1.8V/1.5V/1.35V/1.2V presets)
VDDQ Input Range 3.0V to 28V
VDDQ Max Output Current 10A (external MOSFETs)
Switching Frequency 400kHz fixed
LDO (VTT) 3A sink/source tracking linear regulator
VTT Accuracy +/-20mV (vs VTTREF)
VTTREF Output Buffered, low-noise, 10mA, +/-20mV accuracy
VTT Capacitor Only 20uF ceramic required
S3 Support VTT high-Z (suspend to RAM)
S4/S5 Support VDDQ, VTT, VTTREF soft-off (suspend to disk)
VLDOIN External supply input to reduce LDO power loss
Protection Overvoltage, undervoltage, thermal shutdown
Power Good Yes (PGOOD output)
Operating Temperature -40 to +85 C
Package VQFN-24 (4.0 x 4.0 mm)
Status Active

Features

  • Complete DDR memory power: VDDQ + VTT + VTTREF
  • Supports DDR through DDR4 standards
  • Synchronous buck with D-CAP or current mode
  • 3A sink/source VTT LDO with external VLDOIN
  • Buffered VTTREF with +/-20mV accuracy
  • S3 (high-Z) and S4/S5 (soft-off) sleep state control
  • 400kHz fixed frequency, 100ns load step response
  • Overvoltage, undervoltage, thermal protection

Applications

  • DDR/DDR2/DDR3/DDR4 memory power supplies
  • SSTL-2, SSTL-18, SSTL-15 termination
  • Laptop and desktop memory modules
  • Embedded computing platforms
Product Introduction: TPS51116RGER Product Introduction

The TPS51116RGER from Texas Instruments is a complete DDR memory power supply solution in a 24-pin 4x4mm VQFN package. The RGE denotes VQFN-24 package, R denotes tape and reel (3000 pcs/reel). The device integrates three functions needed for DDR memory power: (1) a synchronous buck controller for VDDQ generation from 3-28V input at up to 10A using external MOSFETs, operating at 400kHz fixed frequency in either D-CAP mode for fastest transient response or current mode for ceramic output capacitor compatibility; (2) a 3A sink/source tracking LDO for VTT termination voltage that precisely tracks VTTREF/2 with only 20uF ceramic output capacitor; and (3) a buffered low-noise 10mA VTTREF reference output at half VDDQ with +/-20mV accuracy. The external VLDOIN pin allows connecting the LDO input to a lower voltage rail (like VDDQ itself) to significantly reduce LDO power dissipation. The device supports all DDR sleep states: S3 (suspend to RAM, VTT goes high-Z while VDDQ stays on) and S4/S5 (suspend to disk, VDDQ/VTT/VTTREF all soft-off).

Working Principle: TPS51116RGER Working Principle

The TPS51116RGER operates through three power subsystems: (1) VDDQ Buck Controller: A synchronous buck controller drives external N-channel MOSFETs to generate VDDQ (2.5V for DDR, 1.8V for DDR2, 1.5V for DDR3, 1.35V for DDR3L, 1.2V for LPDDR3/DDR4). The VDDQSET pin configures the output voltage. The controller uses adaptive on-time control at 400kHz, operating in D-CAP mode when COMP is tied to V5IN (fastest transient response, requires bulk output capacitors) or in current mode when a compensation network is connected to COMP (supports ceramic-only output capacitors). Current sensing uses either MOSFET RDS(ON) or an external sense resistor. (2) VTT LDO: A linear regulator generates VTT = VTTREF with 3A sink and source capability. The tracking architecture ensures VTT precisely follows VTTREF within +/-20mV. The VLDOIN pin accepts an external supply (typically VDDQ or a lower voltage) to reduce the LDO headroom and thus power dissipation. Only 20uF ceramic output capacitor is required due to the fast LDO transient response. (3) VTTREF Buffer: A low-noise buffered reference output at VDDQ/2 provides 10mA output current with +/-20mV accuracy. A resistor divider from VDDQSNS sets the reference voltage.

Pin Description: TPS51116RGER Pin Definition and Functions
Pin Group Count Type Description
Buck Control 6 I/O DRVH, DRVL, VBST, LL, CS, COMP
VDDQ Feedback 2 Input VDDQSNS, VDDQSET
LDO (VTT) 4 I/O VTT, VTTSNS, VTTGND, VLDOIN
VTTREF 1 Output Buffered reference output
Control 4 Input S3, S5, MODE, PGOOD
Power 4 Power V5IN, GND, PGND, VDDQSET
Application Scenarios: In which products and applications is TPS51116RGER used
  • DDR3 memory power for embedded processor with 5V input buck generating 1.5V VDDQ, 3A VTT LDO, and VTTREF buffer
  • DDR4 laptop memory with 12V input, 1.2V VDDQ, VLDOIN connected to VDDQ to minimize LDO loss, and S3/S4 sleep control
  • LPDDR3 mobile platform with 3.3V input, 1.2V VDDQ in D-CAP mode with ceramic capacitors, and 20uF VTT output
  • Industrial DDR2 memory with 24V input, 1.8V VDDQ at 10A, current mode with external sense resistor, and PGOOD monitoring
Alternative Models: What chips are recommended as replacements for TPS51116RGER
Model Manufacturer DDR Support Package Notes
TPS51200A TI DDR2/3 HTSSOP-20 VTT LDO only (no buck)
TPS51916 TI DDR3/4 VQFN-24 Newer, enhanced features
ISL6271 Renesas DDR2/3 QFN-24 Similar integrated solution
NCP51400 onsemi DDR3/4 QFN-20 VTT LDO with tracking

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1