Opens in a new tab

TPS54060ADGQ

0.5A, 60V buck converter, 200mOhm MOSFET, Eco-Mode, 100kHz-2.5MHz, MSOP-10

6838

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54060ADGQ

Package:

MSOP-10 PowerPAD (3.00 x 3.00 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS54060ADGQ from Texas Instruments is a 0.5A, 60V step-down DC-DC converter with integrated high-side MOSFET in an MSOP-10 PowerPAD package. Featuring Eco-Mode for high light-load efficiency, it targets industrial and automotive power supply applications.

Key Specifications

Input Voltage 3.5 V to 60 V
Output Current 0.5 A
High-Side MOSFET RDS(on) 200 mOhm
Switching Frequency 100 kHz to 2.5 MHz (adjustable)
Quiescent Current 116 uA (Eco-Mode)
Shutdown Current 1.3 uA
Reference Voltage 0.8 V
Operating Temperature -40C to +125C

Features

  • 60V maximum input for industrial and automotive rails
  • 200mOhm integrated high-side MOSFET for high efficiency
  • Eco-Mode pulse skipping for 116uA light-load quiescent current
  • Adjustable switching frequency 100kHz to 2.5MHz via RT/CLK pin
  • Internal slow-start with adjustable sequencing/tracking
  • Power Good output for supply monitoring

Applications

  • 12V/24V/48V industrial power supply buck regulators
  • Automotive aftermarket accessories
  • Telecom and networking point-of-load converters
  • Battery-powered and energy-harvesting systems
Product Introduction: TPS54060ADGQ Product Introduction

The TPS54060ADGQ from Texas Instruments is a 60V, 0.5A step-down DC-DC converter with an integrated 200mOhm high-side N-channel MOSFET in an MSOP-10 PowerPAD package. The device operates from 3.5V to 60V input and provides an adjustable output down to 0.8V at up to 0.5A. Current-mode control simplifies external compensation and provides flexible component selection. Eco-Mode pulse skipping reduces no-load regulated output supply current to 116uA for energy-efficient light-load operation. The switching frequency is adjustable from 100kHz to 2.5MHz via a resistor on the RT/CLK pin, and the device can be synchronized to an external clock via the internal PLL. A Power Good open-drain output indicates when the output is within 93% to 107% of nominal voltage. Internal slow-start minimizes inrush current and can be configured for power-supply sequencing or tracking.

Working Principle: TPS54060ADGQ Working Principle

The TPS54060ADGQ uses a current-mode control architecture for stable regulation. (1) Power Stage: The integrated 200mOhm high-side N-channel MOSFET switches the input voltage to the output inductor. An external boot capacitor between BOOT and PH provides gate drive voltage above VIN. (2) Current-Mode Control: An inner current loop senses the MOSFET current and compares it to the voltage error amplifier output. This provides cycle-by-cycle current limiting and simplifies frequency compensation. (3) Eco-Mode: At light loads, the device enters pulse-skipping mode where the controller delivers a single on-pulse and then enters a low-power state until the output falls below the threshold. This reduces the effective switching frequency and quiescent current to 116uA. (4) Synchronization: The RT/CLK pin accepts an external clock for frequency synchronization. An internal PLL locks the switching frequency to the external clock falling edge. (5) Slow-Start: An external capacitor on the SS/TR pin programs the startup ramp time. The pin can also be used for output voltage tracking during sequencing.

Pin Description: TPS54060ADGQ Pin Definition and Functions
Pin Name Type Function
1 BOOT I/O Bootstrap capacitor for high-side gate drive
2 VIN Power Input supply (3.5-60V)
3 EN Input Enable (internal pull-up, float to enable)
4 SS/TR I/O Slow-start / tracking capacitor
5 VSENSE Input Feedback voltage (0.8V reference)
6 COMP I/O Error amplifier output / compensation
7 GND Ground Ground (PowerPAD)
8 RT/CLK I/O Frequency set resistor / sync clock input
9 PWRGD Output Power good (open-drain)
10 PH Output Switch node (connect to inductor)
Application Scenarios: In which products and applications is TPS54060ADGQ used
  • 12V/24V/48V industrial power supply buck regulators with 60V input range
  • Automotive aftermarket accessories (GPS, video, entertainment) with Eco-Mode
  • Telecom and networking point-of-load converters at up to 2.5MHz
  • Battery-powered systems with 1.3uA shutdown current
Alternative Models: What chips are recommended as replacements for TPS54060ADGQ
Manufacturer Part Number Package Notes
TI TPS54160ADGQ MSOP-10 1.5A version, same family
TI LM5017 WSON-12 100V, 0.6A buck
Monolithic Power MP8759GD-Z SOIC-8 60V, 0.5A, similar
Richtek RT6200GQW DFN-10 60V, 0.5A buck

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1