Product Overview
The TPS54060DGQ from Texas Instruments is a 0.5A, 60V step-down DC-DC converter with Eco-Mode for high light-load efficiency in MSOP-10 PowerPAD package.
Key Specifications
| Topology | Step-down (buck) DC-DC converter |
| Input Voltage | 3.5V to 60V |
| Output Current | 0.5A |
| Output Voltage | Adjustable (0.8V reference) |
| Switching Frequency | 50kHz to 2500kHz (programmable) |
| Eco-Mode | Yes (pulse skipping at light load) |
| PWRGD Output | Yes |
| Enable | Yes (UVLO programmable) |
| Synchronous | No (requires external Schottky diode) |
| Package | MSOP-10 PowerPAD (DGQ suffix) |
| Operating Temperature | -40 to +125 C |
Features
- 60V maximum input for automotive and industrial 24V/48V systems
- Eco-Mode maintains high efficiency at light loads
- Programmable switching frequency via external resistor
- PWRGD output for power sequencing and monitoring
- External synchronization via RT/CLK pin
Applications
- Industrial 24V and 48V power supply
- Industrial 24V and 48V power supply for PLCs and sensors
- Automotive 12V/24V auxiliary power with 60V transient withstand
- Battery-powered instrumentation with Eco-Mode light-load efficiency
- LED driver bias supply with programmable frequency
- Telecom 48V distributed power architecture point-of-load converter
Product Introduction: TPS54060DGQ Product Introduction
The TPS54060DGQ from Texas Instruments is a 60V, 0.5A step-down DC-DC converter with integrated high-side N-channel MOSFET in MSOP-10 PowerPAD package. The device operates from a 3.5V to 60V input, making it suitable for automotive 12V/24V and industrial 24V/48V power systems. The adjustable switching frequency (50kHz to 2500kHz) is set by an external resistor on the RT/CLK pin, which also accepts an external clock for synchronization. The Eco-Mode pulse-skipping operation maintains high efficiency at light loads, while the PWRGD output enables power sequencing. The DGQ suffix denotes MSOP-10 with PowerPAD for thermal enhancement.
Working Principle: TPS54060DGQ Working Principle
The TPS54060DGQ operates as a current-mode step-down (buck) DC-DC converter. (1) The high-side N-channel MOSFET connects the input voltage to the LC output filter. When the switch is on, current ramps up through the inductor. When the switch turns off, the inductor current freewheels through the external Schottky catch diode. The output voltage is regulated by adjusting the duty cycle of the switch. (2) The current-mode control loop senses the switch current and compares it with the error amplifier output to determine the switch on-time. This provides inherent cycle-by-cycle current limiting and simplifies loop compensation. The 0.8V reference voltage sets the output voltage via an external resistor divider. (3) In Eco-Mode, the device skips switching pulses at light loads to reduce switching losses. When the inductor current reaches zero, the high-side MOSFET is not turned on again until the output voltage drops below the regulation threshold. This maintains high efficiency at loads below 100mA where switching losses would otherwise dominate.
Pin Description: TPS54060DGQ Pin Definition and Functions
| Pin | Name | Function |
|---|---|---|
| 1 | BOOT | Bootstrap capacitor for high-side driver |
| 2 | VIN | Input supply (3.5-60V) |
| 3 | EN | Enable / UVLO programming |
| 4 | SS/TR | Soft-start / tracking |
| 5 | COMP | Error amplifier compensation |
| 6 | VSENSE | Voltage feedback (0.8V reference) |
| 7 | RT/CLK | Frequency setting / external sync |
| 8 | PWRGD | Power-good output (open drain) |
| 9 | PH | Switch node (to inductor/diode) |
| 10 | GND | Ground (PowerPAD) |
Application Scenarios: In which products and applications is TPS54060DGQ used
Alternative Models: What chips are recommended as replacements for TPS54060DGQ
| Model | Manufacturer | Key Difference |
|---|---|---|
| TPS54160DGQ | TI | 1.5A output, same family |
| LM5017MM/NOPB | TI | 100V, 0.6A, constant on-time |
| LMR16006XDDCR | TI | 60V, 0.6A, SOT-23-THIN |
| MAX17503ATB+T | ADI | 60V, 0.5A, uSLIC, TDFN |
| R8600S | Richtek | 60V, 0.6A, SOT-23-6 |
Recommend Parts

TMP275AIDR
0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC
Brand: TI
Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)
IN STOCK: 3681pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFS4227TRLPBF
IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)
Brand: infineon
Package: D2PAK (TO-263)
IN STOCK: 4334pcs
Cargo cycle: 3-7 Days
The minimum order is 1

CD4070BM96
Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14
Brand: TI
Package: SOIC-14 (8.75 x 3.9 x 1.5mm)
IN STOCK: 4245pcs
Cargo cycle: 3-7 Days
The minimum order is 1

LP2980IM5-5.0
50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)
IN STOCK: 2557pcs
Cargo cycle: 3-7 Days
The minimum order is 1








