Opens in a new tab

TPS54160ADGQ

60V, 1.5A synchronous buck converter, 4.5-60V input, 0.8-55V adjustable output, 500/700kHz in HVSSOP-10

12317

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54160ADGQ

Package:

HVSSOP-10 (3.00 x 3.00 mm) PowerPAD

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS54160ADGQ from Texas Instruments is a 60V input, 1.5A synchronous step-down converter in an HVSSOP-10 (3x3mm) package. It features adjustable output from 0.8V to 55V, 500kHz/700kHz selectable switching frequency, and a quiescent current of 1.5mA, making it suitable for industrial power supply applications from unregulated sources.

Key Specifications

Input Voltage Range 4.5V ~ 60V
Output Voltage Range 0.8V ~ 55V (Adjustable)
Output Current 1.5A (Continuous)
Switching Frequency 500kHz / 700kHz (Selectable)
Efficiency >92% (Typical)
Quiescent Current 1.5mA (Typical)
Shutdown Current 1.5uA (Typical)
Control Mode Current-Mode
Enable Pin Yes (EN)
Power Good Yes (PG)
Protection OCP, OTP, UVLO
Package HVSSOP-10 (3.00 x 3.00mm)
Operating Temperature -40°C ~ +125°C

Features

  • 60V maximum input voltage for industrial and automotive applications
  • Integrated 1.5A MOSFET switches for compact solution size
  • Selectable switching frequency optimizes efficiency vs. component size
  • Precision enable input with programmable UVLO threshold
  • Open-drain power-good output for power sequencing
  • Pulse-skipping Eco-mode for high light-load efficiency
  • Thermal shutdown and cycle-by-cycle overcurrent protection

Applications

  • Industrial power conditioning from 24V/48V buses
  • Automotive aftermarket electronics
  • Battery-powered test and measurement equipment
  • Distributed power architectures
  • Telecom sub-1A point-of-load converters
Product Introduction: TPS54160ADGQ Product Introduction

The TPS54160ADGQ from Texas Instruments is a 60V input, 1.5A step-down DC-DC converter with integrated N-channel MOSFET switches in a compact 10-pin HVSSOP PowerPAD package. The device employs a fixed-frequency current-mode PWM control architecture with selectable switching frequency of 500kHz or 700kHz, allowing optimization of efficiency versus external component size. The wide 4.5V to 60V input range accommodates unregulated DC sources such as 12V, 24V, and 48V industrial buses. The adjustable output voltage range from 0.8V to 55V is set via an external resistor divider. An Eco-mode pulse-skipping feature maintains high efficiency at light loads by reducing the effective switching frequency. The precision enable input with programmable UVLO allows controlled startup sequencing, while the open-drain power-good output indicates output regulation status.

Working Principle: TPS54160ADGQ Working Principle

The TPS54160A employs a current-mode PWM buck topology with integrated high-side and low-side N-channel MOSFETs. The high-side switch connects VIN to the inductor during the on-time, storing energy in the inductor and charging the output capacitor. During the off-time, the low-side synchronous switch provides a path for inductor freewheeling current. The current-mode control loop monitors the inductor current through the high-side switch on a cycle-by-cycle basis. The error amplifier compares the feedback voltage (FB pin) with an internal 0.8V reference and adjusts the COMP node voltage, which sets the peak current threshold. In Eco-mode, the device skips switching pulses when the output voltage is above the set point, reducing switching losses at light load. Protection includes cycle-by-cycle current limit, undervoltage lockout, and thermal shutdown.

Pin Description: TPS54160ADGQ Pin Definition and Functions
Pin Name Function
1 BOOT Bootstrap capacitor for high-side gate driver
2 VIN Input supply voltage (4.5V-60V)
3 EN Enable input with programmable UVLO
4 RT/CLK Frequency select and external clock sync
5 FB Feedback input from output voltage divider
6 COMP Error amplifier output / loop compensation
7 PGND Power ground
8 SW Switch node – connect to output inductor
9 PG Power-good open-drain output
10 AGND Analog ground
Application Scenarios: In which products and applications is TPS54160ADGQ used
  • 24V Industrial Bus Converter: Generates 5V/1.5A from 24V industrial supply with >92% efficiency; PG output enables downstream power sequencing
  • 48V Telecom Point-of-Load: Steps down 48V bus to 3.3V for telecom line card logic with Eco-mode for light-load efficiency
  • Automotive Aftermarket Accessory: Wide 4.5-60V input accommodates automotive 12V/24V systems with load dump protection headroom
  • Battery-Powered Test Equipment: 1.5uA shutdown current preserves battery during storage; programmable UVLO prevents deep discharge
Alternative Models: What chips are recommended as replacements for TPS54160ADGQ
Model Manufacturer Key Difference
TPS54160BDDAQ TI Same, HSOIC-8 (DA) package
TPS54360DDA TI 3.5A version, 60V, HSOIC-8
LM5017 TI 600mA, 100V, constant on-time
LTC3630EMS8E ADI 500mA, 45V, burst mode, MSOP-12
MAX17503ATB+ ADI 2.5A, 60V, internal compensation, TDFN

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1