Opens in a new tab

TPS54202HDDCR

4.5-28V input, 2A synchronous buck converter, 500kHz, SOT-23-6

10000

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54202HDDCR

Package:

6-SOT-23-THIN (2.90 x 2.80 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS54202HDDCR is a Texas Instruments 4.5 V to 28 V, 2 A synchronous step-down voltage converter in a SOT-23-6 package. It features integrated 148 mΩ/78 mΩ MOSFETs, 500 kHz fixed switching frequency, internal loop compensation, 5 ms soft-start, and Eco-mode for light-load efficiency. The device operates from -40°C to +125°C.

Key Specifications

Input Voltage 4.5 V to 28 V
Output Current 2 A
RDS(on) (HS/LS) 148 mΩ / 78 mΩ
Switching Frequency 500 kHz
IQ (operating) 45 µA
IQ (shutdown) 2 µA

Features

  • 4.5 V to 28 V input range
  • 2 A continuous output current
  • 148 mΩ / 78 mΩ integrated MOSFETs
  • 500 kHz fixed switching frequency
  • Advanced Eco-mode for light-load efficiency
  • Internal 5 ms soft-start
  • Internal loop compensation
  • Spread spectrum for EMI reduction

Applications

  • White goods and appliances
  • Consumer electronics power supply
  • Industrial 24V to 5V/3.3V conversion
  • Set-top box and networking
Product Introduction: TPS54202HDDCR Product Introduction

The Texas Instruments TPS54202HDDCR is a 2A synchronous step-down converter in a tiny SOT-23-6 package, supporting input voltages from 4.5V to 28V. The device integrates both high-side and low-side MOSFETs, requiring only four external components (input capacitor, output capacitor, inductor, and feedback resistors) to complete the design. The 500 kHz fixed switching frequency balances efficiency and solution size, and the 1.2 MHz version (TPS54202) is available for even smaller inductors. The device achieves peak efficiency above 90% and maintains >80% efficiency down to 10 mA load in eco-mode (pulse skipping). The DCS-Control (Direct Control with Seamless Transition) topology provides fast transient response with minimal output voltage deviation—typically 2% overshoot/undershoot for a 1A load step—without requiring external compensation. The precision enable threshold (1.21V) allows adjustable UVLO using external resistors. The device supports pre-bias start-up, preventing discharge of the output capacitor during power-up when the output is already at a non-zero voltage. The extended -40C to +150C junction temperature range supports high-ambient industrial environments.

Working Principle: TPS54202HDDCR Working Principle

The TPS54202H uses TI’s DCS-Control topology, a proprietary control scheme that combines voltage-mode and current-mode control characteristics. In steady-state operation, the device operates in pulse-width modulation (PWM) mode at 500 kHz. When the output voltage drops below the setpoint, the controller extends the on-time of the high-side MOSFET, increasing the inductor current and restoring the output voltage. The seamless transition to eco-mode (pulse skipping) occurs when the load current drops below the boundary between continuous conduction mode (CCM) and discontinuous conduction mode (DCM). In eco-mode, switching cycles are skipped to reduce switching losses, and the output voltage ripple increases slightly but remains well-regulated. The internal soft-start (2.1 ms typical) limits inrush current during start-up. The feedback voltage is compared with an internal 0.6V reference, and the output voltage is set by VOUT = 0.6V x (1 + R1/R2). The integrated bootstrap circuit generates the gate drive voltage for the high-side NMOS switch.

Pin Description: TPS54202HDDCR Pin Definition and Functions
Pin Mnemonic Description
1 GND Ground
2 SW Switching node
3 VIN Input supply (4.5-28V)
4 FB Feedback input (0.6V reference)
5 EN Enable input (1.21V threshold)
6 CB Bootstrap capacitor connection
Application Scenarios: In which products and applications is TPS54202HDDCR used
  • 12V to 3.3V/2A MCU power supply in industrial equipment with only 4 external components and SOT-23 footprint
  • 24V to 5V/2A sensor supply with >90% peak efficiency and eco-mode for light-load efficiency
  • Battery-powered instrument 9V to 1.8V/2A DSP core supply with 2.1ms soft-start and pre-bias start-up
  • Consumer electronics 5V USB to 1.2V/2A processor core with fast DCS-Control transient response
Alternative Models: What chips are recommended as replacements for TPS54202HDDCR
Model Manufacturer Key Difference
TPS54202DDCR TI 1.2MHz version, smaller inductor possible
TPS562201DDCR TI 2A, 4.5-17V, lower voltage range
LMR16006YQDDCRQ1 TI 600mA, 4-60V, automotive qualified
MP8759GD-Z MPS 4A, 4.5-22V, QFN package, higher current

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1