Opens in a new tab

TPS5430DDA

3A Buck converter, 5.5-36V in, adj 1.22-31V out, 500kHz, SOIC-8 EP

6840

Effective Inventory

Image for reference only

Manufacturer Part:

TPS5430DDA

Package:

SOIC-8 with PowerPAD (4.9×6.0 mm, DDA)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS5430DDA from Texas Instruments is a 3A, wide-input-range step-down (buck) converter with an integrated 110 mΩ high-side N-channel MOSFET. Operating from 5.5V to 36V input and providing adjustable output down to 1.22V at up to 95% efficiency, it is designed for space-constrained power supply applications. Packaged in a thermally enhanced 8-pin SOIC with PowerPAD for efficient heat dissipation.

Key Specifications

Topology Buck (Step-Down)
Input Voltage Range 5.5V to 36V
Output Current 3A continuous, 4A peak
Output Voltage Range 1.22V to 31V (adjustable)
Switching Frequency 500 kHz (fixed)
Integrated MOSFET RDS(ON) 110 mΩ (high-side)
Efficiency Up to 95%
Quiescent Current 3 mA (typical, operating)
Shutdown Current 15 µA (typical via ENA)
Control Mode Voltage-mode with feed-forward
Operating Temperature -40°C to +125°C (junction)
Package SOIC-8 with PowerPAD (DDA)

Features

  • Wide 5.5V to 36V input voltage range
  • Adjustable output down to 1.22V with 1.5% initial accuracy
  • Internal compensation reduces external component count
  • Fixed 500 kHz switching frequency for compact filter design
  • Input voltage feed-forward improves line transient response
  • Internal slow-start limits inrush current
  • Active-high enable (ENA) pin for low standby current
  • Overcurrent limiting, overvoltage protection, and thermal shutdown
  • Undervoltage lockout (UVLO) prevents start-up below 5.5V

Applications

  • 12V/24V distributed power system step-down conversion
  • Consumer electronics: set-top boxes, DVD, LCD displays
  • Industrial and automotive audio power supply
  • Battery charger and high-power LED driver
  • Point-of-load regulation from 24V bus
Product Introduction: TPS5430DDA Product Introduction

The TPS5430DDA from Texas Instruments is a 3A step-down buck converter integrating a 110 mΩ high-side N-channel MOSFET in a thermally enhanced SOIC-8 PowerPAD package. With a wide 5.5V to 36V input range and adjustable output from 1.22V to 31V, it delivers up to 95% efficiency at 500 kHz fixed switching frequency. Internal compensation, slow-start, and comprehensive protection (OCP, OVP, thermal shutdown) minimize external components and simplify design.

Working Principle: TPS5430DDA Working Principle

The TPS5430DDA uses voltage-mode control with input voltage feed-forward to maintain stable operation across wide input variations. The internal oscillator generates a fixed 500 kHz sawtooth ramp. The error amplifier compares the divided output voltage (VSENSE pin) with a 1.22V internal reference, and the PWM comparator modulates the duty cycle of the integrated high-side NMOS switch. The feed-forward path adjusts the ramp amplitude proportionally to input voltage, providing immediate duty cycle correction for line transients. An internal bootstrap diode charges the BOOT capacitor during each off-cycle to provide gate drive above VIN for the high-side MOSFET. The PH pin connects to the external inductor and catch diode to form the buck output stage.

Pin Description: TPS5430DDA Pin Definition and Functions
Pin Name Type Function
1 BOOT I/O Bootstrap capacitor for high-side gate drive (connect 0.01µF to PH)
2 NC — No internal connection
3 NC — No internal connection
4 VSENSE Input Feedback voltage sense (connect to output voltage divider)
5 ENA Input Enable (active-high, float to enable; pull below 0.5V to disable)
6 GND Power Ground (connect to PowerPAD)
7 VIN Power Input supply voltage (5.5-36V, bypass with low-ESR ceramic cap)
8 PH Output Phase node (connect to external inductor and catch diode)
Pad PowerPAD Power Thermal pad (connect to GND plane for heat dissipation)
Application Scenarios: In which products and applications is TPS5430DDA used
  • 12V/24V to 5V or 3.3V step-down conversion in distributed power systems
  • Consumer electronics including set-top boxes, DVD players, and LCD displays
  • Industrial and automotive audio power supply regulation
  • Battery charger and high-power LED driver power stage
  • Point-of-load regulation from 24V bus rails
Alternative Models: What chips are recommended as replacements for TPS5430DDA
Manufacturer Part Number Package Notes
TI TPS5431DDA SOIC-8 EP 5.5-23V input, lower voltage version
TI TPS5450DDA SOIC-8 EP 5A output, higher current version
Monolithic Power MP1584EN-LF-Z SOIC-8 EP 4.5-28V, 4A, pin-compatible alternative
TI LM2678-5.0 TO-263-7 5A, 5V fixed, simpler but larger package
Richtek RT8290AZSP SOP-8 EP 4.5-24V, 3A, similar application

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1