Opens in a new tab

TPS54560BDDAR

5A 60V buck converter, 146uA IQ, 2.2MHz, HSOIC-8

15000

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54560BDDAR

Package:

HSOIC-8 PowerPAD (4.89 x 3.90 x 1.47 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS54560BDDAR from Texas Instruments is a 5A, 4.5V-60V step-down DC-DC converter with 146mA switch current limit and 2.2MHz switching frequency in HSOIC-8 package.

Key Specifications

Topology Non-synchronous Buck (external diode)
Input Voltage 4.5 V to 60 V
Output Voltage 0.8 V to 57 V (adjustable)
Output Current 5 A maximum
Feedback Voltage 0.8 V typical
Switch Current Limit 6.5 A minimum (B version)
Switching Frequency 100 kHz to 2.2 MHz (adjustable)
Quiescent Current (Active) 146 uA typical
Shutdown Current 1.5 uA typical
HS FET RDS(ON) 87 mOhm typical (high-side only)
Control Mode Peak current-mode with external compensation
Protection OCP, thermal shutdown, UVLO, OVP
Package HSOIC-8 (DDA suffix, PowerPAD)
Operating Temperature -40 to +150 C (TJ)

Features

  • 60V maximum input voltage for automotive and industrial
  • 2.2MHz switching frequency for small external components
  • Low 146uA quiescent current for battery-powered applications
  • External compensation for design flexibility
  • Spread-spectrum option for EMI reduction (B version)

Applications

  • Automotive 12V/24V battery to logic voltage conversion
  • Industrial power supply from 24V/48V rails
  • Battery-powered systems with wide input range
  • LED driver and general-purpose buck conversion
  • Telecom and distributed power architectures
Product Introduction: TPS54560BDDAR Product Introduction

The TPS54560BDDAR from Texas Instruments is a 5A, 4.5V-60V step-down DC-DC converter in HSOIC-8 PowerPAD package. The device uses a 87mOhm high-side N-channel MOSFET with external Schottky catch diode for non-synchronous operation. The 2.2MHz maximum switching frequency allows compact inductor and capacitor selection, while the 146uA quiescent current extends battery life in always-on applications. The B version features a minimum 6.5A switch current limit (vs 5.5A for the original version) and spread-spectrum clock dithering for EMI reduction. The external compensation network provides flexibility for various output filter configurations. The DDA suffix denotes HSOIC-8 PowerPAD with tape and reel packaging.

Working Principle: TPS54560BDDAR Working Principle

The TPS54560BDDAR operates as a peak current-mode non-synchronous buck converter. (1) The integrated N-channel high-side MOSFET (87mOhm) connects the input voltage to the inductor during the on-time. During the off-time, the external Schottky diode provides the inductor current return path. The non-synchronous architecture trades slightly lower efficiency at light loads for simplicity and lower cost (no low-side MOSFET). The controller uses peak current-mode control where the PWM comparator compares the current sense signal with the error amplifier output to set the duty cycle. (2) The switching frequency is set by an external resistor from the RT/CLK pin to GND, adjustable from 100kHz to 2.2MHz. Higher frequencies allow smaller inductors and capacitors but increase switching losses. The RT/CLK pin also accepts an external clock for synchronization. The B version adds spread-spectrum frequency dithering (approximately +/-10% modulation) that spreads the switching energy across a wider bandwidth, reducing peak EMI emissions. (3) The 60V maximum input voltage makes the device suitable for automotive (12V/24V battery with load dump transients) and industrial (24V/48V rails) applications. The 6.5A minimum current limit ensures 5A output current delivery even at low input voltages. The external compensation allows optimization for various output capacitor types and values, enabling design flexibility not available with internally compensated devices.

Pin Description: TPS54560BDDAR Pin Definition and Functions
Pin Name Function
1 BOOT Bootstrap capacitor (to SW)
2 VIN Input supply (4.5-60V)
3 EN Enable / UVLO programming
4 SS Soft-start (external capacitor)
5 VSENSE Feedback (0.8V reference)
6 COMP Error amplifier output / compensation
7 GND Ground (and PowerPAD)
8 SW Switch node (inductor + diode)
Application Scenarios: In which products and applications is TPS54560BDDAR used
  • Automotive 12V/24V battery to 3.3V/5V conversion with 60V rating
  • Industrial 24V/48V to logic voltage buck conversion at 5A
  • Battery-powered systems with wide input range and 146uA IQ
  • LED driver with spread-spectrum EMI reduction (B version)
  • Telecom and distributed power with external compensation flexibility
Alternative Models: What chips are recommended as replacements for TPS54560BDDAR
Model Manufacturer Key Difference
TPS54560DDAR TI 5.5A min current limit, no SS
LM5161DDAR TI 1A, 65V, constant on-time
L6983NQR ST 3A, 4-38V, synchronous, HSOIC-8
MAX17503ATP+ ADI 5A, 4.5-60V, TSSOP-20
NCV51411DR2G onsemi 1.5A, 40V, SOIC-8

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1