Opens in a new tab

TPS560430YFDBVR

4-36V/600mA sync buck, 2.1MHz, SOT-23-6, PFM/FPWM, internal comp, hiccup SCP

5236

Effective Inventory

Image for reference only

Manufacturer Part:

TPS560430YFDBVR

Package:

SOT-23-6 (2.90 x 1.60 x 1.20 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS560430YFDBVR from Texas Instruments is a SIMPLE SWITCHER 4V to 36V, 600mA synchronous step-down converter in a tiny SOT-23-6 package, with 2.1MHz fixed frequency and internal compensation.

Key Specifications

Topology Synchronous Buck
Input Voltage 4V to 36V
Output Voltage 1V to 34.2V (adjustable)
Output Current 600mA
Switching Frequency 2.1 MHz (fixed)
Reference Voltage 0.6V +/-0.5%
Quiescent Current 80uA (typ)
Min ON Time 60ns
Max Duty Cycle 98%
Synchronous Rectifier Yes (integrated)
Package SOT-23-6 (2.9 x 1.6mm)
Operating Temperature -40 to +125 C

Features

  • Wide 4V to 36V input range for automotive and industrial
  • 600mA continuous output current with integrated synchronous rectifier
  • 2.1MHz fixed frequency allows small inductor
  • Internal soft-start and compensation
  • PFM or FPWM mode options (pin-compatible)
  • Cycle-by-cycle current limit and hiccup short-circuit protection
  • Thermal shutdown protection

Applications

  • Automotive camera modules
  • On-board chargers
  • Automotive head units
  • USB charger ports
Product Introduction: TPS560430YFDBVR Product Introduction

The TPS560430YFDBVR from Texas Instruments is a SIMPLE SWITCHER synchronous step-down DC-DC converter capable of driving up to 600mA load current from a wide 4V to 36V input range. The device integrates both high-side and low-side MOSFETs, requiring only an inductor and a few passive components for a complete step-down regulator solution. The 2.1MHz fixed switching frequency enables the use of small external inductors and capacitors, minimizing total solution size. Internal soft-start limits inrush current during startup, and internal compensation simplifies design by eliminating external compensation components. The TPS560430 is available in two pin-compatible versions: the PFM version (TPS560430x) enters a pulse-frequency-modulation mode at light loads for high efficiency, while the FPWM version (TPS560430x2xx) maintains forced PWM operation across the entire load range for tighter output voltage regulation. The reference voltage of 0.6V with +/-0.5% accuracy (at room temperature) provides precise output voltage setting through a resistor divider. Protection features include cycle-by-cycle current limiting, hiccup-mode short-circuit protection (which reduces average power dissipation during sustained faults), and thermal shutdown with automatic recovery. The minimum on-time of 60ns supports high step-down ratios even at the 2.1MHz switching frequency. Housed in a tiny SOT-23-6 package, the TPS560430 occupies minimal board space for space-constrained applications.

Working Principle: TPS560430YFDBVR Working Principle

The TPS560430YFDBVR operates as a fixed-frequency peak current-mode synchronous buck converter. Key subsystems include: (1) Peak Current Mode Control – the high-side MOSFET current is sensed and compared with the error amplifier output; when peak current reaches the reference level, the high-side switch turns off and the low-side synchronous rectifier turns on; this provides inherent cycle-by-cycle current limiting and simplified loop compensation; (2) Integrated Power Stage – the high-side NMOS switch and low-side NMOS synchronous rectifier are integrated on-chip; the bootstrap capacitor (connected between BOOT and SW pins) provides the gate drive voltage for the high-side switch; (3) Error Amplifier – compares the feedback voltage (FB pin) with the 0.6V internal reference; the output drives the PWM comparator through internal Type-II compensation; (4) Mode Selection – PFM version enters discontinuous conduction at light loads by skipping pulses, reducing switching losses and maintaining high efficiency; FPWM version maintains continuous conduction across all loads, ensuring constant switching frequency and lower output ripple; (5) Protection – cycle-by-cycle current limit caps peak switch current per cycle; if an overcurrent condition persists (output shorted), hiccup mode disables switching for a recovery period before retrying, preventing excessive thermal stress; thermal shutdown disables switching when junction temperature exceeds approximately 160C.

Pin Description: TPS560430YFDBVR Pin Definition and Functions
Pin Name Function
1 BOOT Bootstrap capacitor connection for high-side gate drive
2 VIN Input voltage supply (4V to 36V)
3 EN Enable input (high=enabled, low=shutdown)
4 FB Output voltage feedback (connect resistor divider)
5 GND Ground
6 SW Switch node (connect to inductor)
Application Scenarios: In which products and applications is TPS560430YFDBVR used
  • Automotive camera: 12V battery to 3.3V/1.8V for image sensor and processor
  • Industrial sensor: 24V field supply to 5V for sensor signal conditioning
  • USB charger: 12V adapter to 5V/600mA for USB power port
  • Battery-powered IoT: 6-12V battery to 3.3V, PFM mode for long battery life
Alternative Models: What chips are recommended as replacements for TPS560430YFDBVR
Manufacturer Part Number Package Notes
TI TPS560430YFDBVT SOT-23-6 Cut tape version
TI TPS562201DDCR SOT-23-6 4.5-17V/2A, wider input, higher current
Monolithic Power MP8759GD-Z TSOT-23-6 4.5-21V/2A, similar pinout
TI TPS563200DDCR SOT-23-6 4.5-17V/3A, higher current class
TI LMR16006YDDCR SOT-23-6 4-60V/600mA, wider input range

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1