Opens in a new tab

TPS562201DDCR

Synchronous Buck DC-DC, 2A, 4.5-17V input, 650kHz, SOT-23-6

7823

Effective Inventory

Image for reference only

Manufacturer Part:

TPS562201DDCR

Package:

SOT-23-6 (2.9×1.6×1.1 mm, DDC package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS562201DDCR is a 2A synchronous step-down converter from Texas Instruments. Operating over a wide 4.5V to 17V input range with integrated FETs and 650 kHz switching frequency, it provides high efficiency in a tiny SOT-23-6 package. Designed for space-constrained point-of-load applications requiring minimal external components.

Key Specifications

Topology Synchronous Buck
Input Voltage Range 4.5V to 17V
Output Current 2A
Switching Frequency 650 kHz
Reference Voltage 0.6V
Quiescent Current 220 µA (typical)
Shutdown Current 1 µA (typical)
Efficiency Up to 93%
Operating Temperature -40°C to +85°C
Package SOT-23-6 (DDC)

Features

  • Wide input voltage range: 4.5V to 17V
  • Integrated 80/50 mΩ MOSFET switches
  • D-CAP2 control mode for fast transient response
  • Auto-skip mode for light-load efficiency
  • Internal soft-start (1 ms typical)
  • Overcurrent, overvoltage, and thermal shutdown protection
  • Only 4 external components required

Applications

  • Set-top box and router power supplies
  • Industrial 12V/24V bus point-of-load conversion
  • Digital TV and display power rails
  • Consumer electronics buck regulation
  • Networking equipment POL converters
Product Introduction: TPS562201DDCR Product Introduction

The TPS562201DDCR from Texas Instruments is a 2A synchronous step-down converter with an input voltage range of 4.5V to 17V. Using TI’s D-CAP2 control mode, it provides excellent transient response without external compensation components. The integrated 80/50 mΩ MOSFETs achieve up to 93% efficiency, while auto-skip mode maintains high efficiency at light loads. Only four external components are required for a complete design.

Working Principle: TPS562201DDCR Working Principle

The TPS562201 uses TI’s proprietary D-CAP2 control mode, a constant on-time architecture with emulated current feedback. This eliminates the need for external compensation while providing excellent transient response. The internal error amplifier compares the FB pin voltage with the 0.6V reference and adjusts the on-time to maintain regulation. At light loads, the converter enters auto-skip mode, reducing switching frequency to minimize losses. Overcurrent protection is implemented via cycle-by-cycle valley current limiting, while overvoltage protection and thermal shutdown provide additional fault protection.

Pin Description: TPS562201DDCR Pin Definition and Functions
Pin Name Type Function
1 GND Power Ground
2 SW Output Switch node (connect to inductor)
3 VIN Input Input supply (4.5-17V)
4 VBST Input Bootstrap supply (connect cap to SW)
5 EN Input Enable (pull high to turn on)
6 FB Input Output feedback (Vout=0.6×(1+R1/R2))
Application Scenarios: In which products and applications is TPS562201DDCR used
  • Set-top box and home gateway 12V to 3.3V/1.8V conversion
  • Industrial 12V/24V bus point-of-load regulation
  • Digital TV and LCD monitor power rails
  • Networking equipment POL power supplies
  • Consumer electronics multi-rail buck conversion
Alternative Models: What chips are recommended as replacements for TPS562201DDCR
Manufacturer Part Number Package Notes
TI TPS563201DDCR SOT-23-6 3A version, pin-compatible
TI TPS564201DDCR SOT-23-6 4A version, higher current
MPS MP8759GD QFN-12 4A, similar input range
onsemi NCP1529ASNT1G SOT-23-5 1A buck, lower current alternative
Silergy SY8009AAAC SOT-23-5 1.5A buck, 3-5.5V input only

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1