Opens in a new tab

TPS563249DDCR

3A 17V buck, D-CAP3, 1.4MHz FCCM, SOT-23-6

9500

Effective Inventory

Image for reference only

Manufacturer Part:

TPS563249DDCR

Package:

6-Pin SOT-23-THN (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS563249DDCR is a Texas Instruments 17V 3A synchronous buck converter with D-CAP3 control, 1.4MHz forced CCM, and 70mohm/30mohm FETs. Packaged in SOT-23-6, -40C to +125C.

Key Specifications

Input Voltage 4.5 V to 17 V
Output Current 3 A
Frequency 1.4 MHz fixed
RDS(on) HS 70 mohm
RDS(on) LS 30 mohm
Package SOT-23-THN-6

Features

  • 4.5V to 17V input range
  • 3A output, 70mohm/30mohm FETs
  • D-CAP3 control, no compensation
  • 1.4MHz forced CCM
  • +/-1% Vref accuracy
  • 1.7ms internal soft-start
  • Hiccup-mode OCP

Applications

  • Industrial 12V/5V POL
  • Set-top box and STB
  • Consumer electronics
  • Network equipment
Product Introduction: TPS563249DDCR Product Introduction

The TPS563249DDCR is a Texas Instruments 3A synchronous step-down converter in an ultra-compact 6-pin SOT-23-THN package. The 4.5V to 17V input range covers 5V and 12V distributed bus architectures. The integrated 70mohm high-side and 30mohm low-side MOSFETs deliver 3A continuous output with high efficiency. D-CAP3 control provides fast transient response with no external compensation, supporting low-ESR ceramic and polymer output capacitors. The forced continuous conduction mode (FCCM) maintains constant 1.4MHz switching frequency at all loads, eliminating variable-frequency EMI that complicates system noise filtering. The +/-1% feedback voltage accuracy over temperature provides tight output regulation for digital loads. The 1.7ms internal soft-start limits inrush current during startup. Cycle-by-cycle peak current limit and hiccup-mode overcurrent protection handle sustained overloads. Undervoltage and thermal shutdown provide additional fault handling. The low 10uA shutdown current minimizes battery drain when disabled. The 6-pin SOT-23-THN package occupies only 4.6mm2 of board area. Packaged in SOT-23-6 rated for -40C to +125C junction.

Working Principle: TPS563249DDCR Working Principle

The TPS563249 uses D-CAP3 (Direct Control with Adaptive On-Time, 3rd generation) control topology. D-CAP3 is an adaptive constant on-time control with a virtual inductor current ripple emulator and internal compensation. The on-time is inversely proportional to VIN and directly proportional to VOUT, maintaining approximately 1.4MHz switching frequency. The internal ripple injection circuit adds a synthetic ramp to the FB pin signal, providing the PWM ramp without requiring output voltage ripple. This allows the use of very low-ESR ceramic output capacitors while maintaining stability. The error amplifier in D-CAP3 provides DC accuracy with internal Type-2 compensation that covers a wide range of L-C output filter values. In FCCM, the low-side MOSFET is always driven, allowing negative inductor current at light loads and maintaining constant frequency. The peak current limit comparator monitors the high-side FET current each cycle. When the current limit is exceeded for 128 consecutive cycles, hiccup-mode protection disables switching for a recovery period, limiting average power dissipation during faults.

Pin Description: TPS563249DDCR Pin Definition and Functions
Pin Mnemonic Description
1 BOOT Bootstrap capacitor
2 VIN Input supply (4.5-17V)
3 EN Enable (active high)
4 FB Feedback (0.6V reference)
5 GND Ground (exposed pad)
6 SW Switch node
Application Scenarios: In which products and applications is TPS563249DDCR used
  • Industrial 12V to 3.3V POL with 3A output and D-CAP3 no-compensation design
  • Set-top box 12V to 5V supply with 1.4MHz FCCM for predictable EMI
  • Consumer electronics 5V to 1.2V core supply with 1% accuracy
  • Network equipment 12V to 1.8V with SOT-23-6 compact footprint
Alternative Models: What chips are recommended as replacements for TPS563249DDCR
Model Manufacturer Key Difference
TPS563248DDCR TI Auto PFM/FCCM mode
TPS563201DDCR TI Lower cost, simpler
TPS562249DDCR TI 2A version
MP8759GD MPS Similar 3A buck

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1