Opens in a new tab

TPS61093DSKT

Synchronous boost converter, 1.8-6V in, 28V out, constant current LED driver, SOT-23-6

13087

Effective Inventory

Image for reference only

Manufacturer Part:

TPS61093DSKT

Package:

SOT-23-6 (DSK) (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS61093DSKT from Texas Instruments is a high-efficiency synchronous boost converter with constant current output capability, designed for driving LED strings or charging supercapacitors. It operates from a 1.8V to 6V input range in a SOT-23-6 (DSK) package, providing up to 28V output voltage and configurable current regulation for single or multi-cell LED applications.

Key Specifications

Topology Synchronous Boost Converter
Input Voltage 1.8V to 6V
Output Voltage Up to 28V
Switch Current 1A (integrated)
Switching Frequency 1 MHz typ
Efficiency Up to 93%
Current Regulation Constant current mode for LEDs
PWM Dimming Yes (via CTRL pin)
Operating Temperature -40°C to +85°C
Package SOT-23-6 (DSK) (2.9 x 1.6 x 1.0 mm)

Features

  • Integrated synchronous rectifier for high efficiency
  • Constant current output with sense resistor
  • PWM brightness dimming via CTRL pin
  • True shutdown disconnects load from input
  • 1 MHz switching frequency minimizes inductor size
  • Over-temperature and over-current protection

Applications

  • White LED backlight for small LCD displays
  • LED flashlight and camera flash drivers
  • Supercapacitor chargers
  • Battery-powered LED lighting
  • Portable equipment display illumination
Product Introduction: TPS61093DSKT Product Introduction

The Texas Instruments TPS61093DSKT is a high-efficiency synchronous boost converter specifically designed for LED driving applications requiring constant current regulation. Operating from input voltages as low as 1.8V, it can boost the output up to 28V, making it suitable for single-cell to multi-cell alkaline, NiMH, or Li-Ion battery-powered LED lighting. The integrated synchronous rectifier eliminates the external Schottky diode, improving efficiency up to 93% while reducing component count. The device provides constant current regulation via an external sense resistor, with PWM dimming capability through the CTRL pin for brightness control. The true shutdown feature disconnects the LED string from the input supply, eliminating leakage current during off state.

Working Principle: TPS61093DSKT Working Principle

The TPS61093DSKT operates as a current-mode synchronous boost converter. During the on-time, the internal NMOS switch connects the inductor to ground, storing energy in the inductor’s magnetic field. During the off-time, the internal PMOS synchronous rectifier connects the inductor to the output, transferring stored energy to the output capacitor and LED load. The current regulation loop senses the voltage across an external current-sense resistor in series with the LED string and adjusts the switch duty cycle to maintain the programmed LED current. The 1 MHz switching frequency allows the use of small 2.2 uH to 4.7 uH chip inductors. PWM dimming is achieved by toggling the CTRL pin, which enables and disables the switching cycle while maintaining output regulation between dimming pulses.

Pin Description: TPS61093DSKT Pin Definition and Functions
Pin Name Description
1 SW Switch Node (connect to inductor)
2 GND Ground
3 FB/ISENSE Current Sense Feedback Input
4 CTRL Enable / PWM Dimming Control
5 VIN Input Supply (1.8-6V)
6 OUT Output Voltage / LED Anode Connection
Application Scenarios: In which products and applications is TPS61093DSKT used
  • LCD Backlight: Driving 6-8 white LED strings from a single Li-Ion cell in smartphones and portable media players with PWM dimming for adaptive brightness
  • LED Flashlight: Constant current drive for high-power white LEDs from 2-cell alkaline or single Li-Ion batteries with true shutdown for zero standby drain
  • Camera Flash: Burst-mode LED current drive for mobile phone camera flash with CTRL pin pulsed for strobe operation
  • Supercapacitor Charger: Constant current charging of supercapacitors from low-voltage sources with automatic voltage limiting
  • Wearable Display: Compact SOT-23-6 footprint and 1.8V minimum input for smartwatch and fitness tracker display illumination
Alternative Models: What chips are recommended as replacements for TPS61093DSKT
Model Brand Vin (V) Vout (V) Isw (A)
TPS61094DSKR TI 1.8-5.5 28 1.5
MT3608 Aerosemi 2-24 28 4
SX1308 Silergy 2-24 28 4
LTC3490EMS8 ADI 0.9-3.2 7 0.5
CAT4139TD-T3 onsemi 2.8-5.5 22 0.75

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1