Opens in a new tab

TPS6209733RWKT

3A buck, 2.3-6V in, 3.3V fixed out, DCS-Control, VQFN-6 (2x2mm), 17uA Iq

5183

Effective Inventory

Image for reference only

Manufacturer Part:

TPS6209733RWKT

Package:

VQFN-6 (2.00 x 2.00 x 0.60 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS6209733RWKT from Texas Instruments is a 3A synchronous step-down converter with 3.3V fixed output in a VQFN-6 (2x2mm) package. Operating from 2.3V to 6V input with DCS-Control topology, it provides high efficiency and fast transient response for portable and battery-powered applications.

Key Specifications

Input Voltage 2.3 V to 6 V
Output Voltage 3.3 V (fixed)
Output Current 3 A
Switching Frequency 2.5 MHz (typical)
Quiescent Current 17 uA (typical)
Operating Temperature -40C to +125C

Features

  • 3A output current in tiny 2x2mm VQFN-6 package
  • 3.3V fixed output eliminates external feedback resistors
  • DCS-Control topology for fast transient response
  • 2.5MHz switching frequency for small inductors
  • 17uA quiescent current in power-save mode
  • 100% duty cycle mode for lowest dropout

Applications

  • Single-cell Li-Ion to 3.3V regulation
  • Portable instruments and handheld devices
  • USB-powered 3.3V supplies
  • Wearable and IoT device power management
Product Introduction: TPS6209733RWKT Product Introduction

The TPS6209733RWKT from Texas Instruments is a 3A synchronous step-down converter with a fixed 3.3V output in an ultra-compact VQFN-6 (2x2mm) package. The device operates from 2.3V to 6V input, making it ideal for single-cell Li-Ion or USB-powered applications requiring a 3.3V rail. The DCS-Control (Direct Control with Seamless transition) topology provides fast transient response with seamless transition between PWM and power-save modes. The 2.5MHz switching frequency allows use of tiny chip inductors. In power-save mode, the quiescent current is only 17uA typical, preserving battery life. The device supports 100% duty cycle mode for lowest dropout operation when the input voltage approaches the output voltage. The fixed 3.3V output eliminates external feedback resistors, further reducing solution size.

Working Principle: TPS6209733RWKT Working Principle

The TPS6209733RWKT uses TI’s DCS-Control topology. (1) DCS-Control: A proprietary control scheme that combines voltage-mode control with a fast output voltage comparator. The comparator provides immediate response to output voltage deviations, while the voltage-mode loop maintains precise DC regulation. (2) PWM Mode: At load currents above the power-save threshold, the device operates in fixed-frequency PWM mode at 2.5MHz, providing low output ripple. (3) Power-Save Mode: At light loads, the device enters PFM (pulse-frequency modulation) mode where single switching pulses are delivered on demand, reducing the effective switching frequency and quiescent current to 17uA. (4) Seamless Transition: The DCS-Control architecture ensures smooth transition between PWM and PFM modes without output voltage dips or overshoots. (5) 100% Duty Cycle: When VIN approaches VOUT, the high-side MOSFET is held on continuously, eliminating switching losses and providing the lowest possible dropout voltage.

Pin Description: TPS6209733RWKT Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (2.3-6V)
2 GND Ground Ground
3 EN Input Enable (active high)
4 SW Output Switch node (connect to inductor)
5 VOUT Power Regulated 3.3V output
6 PG Output Power good (open-drain)
Application Scenarios: In which products and applications is TPS6209733RWKT used
  • Single-cell Li-Ion to 3.3V regulation with DCS-Control fast transient
  • Portable instruments and handheld devices with 17uA power-save Iq
  • USB-powered 3.3V supplies with 100% duty cycle dropout mode
  • Wearable and IoT device power management in 2x2mm VQFN-6
Alternative Models: What chips are recommended as replacements for TPS6209733RWKT
Manufacturer Part Number Package Notes
TI TPS6209750RWKR VQFN-6 5.0V output version
TI TPS6209718RWKR VQFN-6 1.8V output version
TI TPS62823DMQR VQFN-6 3A, 1.8-6.5V, similar
Richtek RT6216FHN SOT-23-6 2A, 18V, different range

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1