Opens in a new tab

TPS62130RGTR

3-17V, 3A sync buck, DCS-Control, 2.5MHz, VQFN-16

9545

Effective Inventory

Image for reference only

Manufacturer Part:

TPS62130RGTR

Package:

16-Pin VQFN (3.0 x 3.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS62130RGTR is a Texas Instruments 3V-17V input, 3A output synchronous step-down DC-DC converter with DCS-Control topology, 2.5MHz switching, 17uA quiescent current, and programmable soft-start. Packaged in 3x3mm VQFN-16, -40C to +125C.

Key Specifications

Input Voltage 3 V to 17 V
Output Voltage 0.9 V to 6 V (adjustable)
Output Current 3 A
Switching Frequency 2.5 MHz (selectable)
Quiescent Current 17 uA typ (Power Save)
Shutdown Current <2 uA
Control Topology DCS-Control
Package VQFN-16 (3 x 3 mm)

Features

  • DCS-Control topology for fast transient response
  • 3V to 17V wide input voltage range
  • Up to 3A continuous output current
  • Adjustable output from 0.9V to 6V
  • 100% duty cycle mode for lowest dropout
  • Power Save Mode with seamless transition
  • Programmable soft-start and tracking
  • Open-drain Power Good output
  • Pin-to-pin compatible with TPS62140/50

Applications

  • 12V standard rail POL supplies
  • Li-ion battery powered systems
  • Solid-state drives and embedded systems
  • Server and microserver power
Product Introduction: TPS62130RGTR Product Introduction

The TPS62130RGTR is a Texas Instruments synchronous step-down DC-DC converter in a compact 3x3mm VQFN-16 package. The 3V to 17V input range supports 12V intermediate rails and single or multi-cell Li-ion batteries. The DCS-Control (Direct Control with Seamless transition) topology provides fast transient response with a single reactive output component, while maintaining nearly constant switching frequency. The 2.5MHz switching frequency enables the use of small inductors (2.2uH typical) and capacitors, minimizing solution size. The device delivers up to 3A continuous output current with output voltage adjustable from 0.9V to 6V. The Power Save Mode automatically activates at light loads with 17uA quiescent current, maintaining high efficiency across the entire load range with seamless transition between PWM and PFM modes. The 100% duty cycle mode allows the output to approach the input voltage in dropout conditions. The programmable soft-start controls the output voltage ramp, enabling power sequencing via the Enable and Power Good pins.

Working Principle: TPS62130RGTR Working Principle

The TPS62130 uses TI DCS-Control topology, which combines voltage-mode control with a direct feed-forward path from the output voltage. The error amplifier compares the feedback voltage (from the VOS pin or external divider) with an internal 0.8V reference. The DCS-Control generates the on-time based on the input voltage and output voltage ratio, maintaining nearly constant frequency. The off-time is adaptively controlled to achieve seamless transition between continuous conduction (PWM) and discontinuous conduction (PFM) modes. In Power Save Mode at light loads, the device skips switching pulses to reduce switching losses. The 100% duty cycle mode turns the high-side MOSFET on continuously when the input voltage approaches the output voltage, minimizing dropout. The current limit circuit protects against overloads by monitoring the high-side MOSFET current and reducing the current limit to 1.6A during short circuits.

Pin Description: TPS62130RGTR Pin Definition and Functions
Pin Mnemonic Description
1 PGND Power ground
2 SW Switch node to inductor
3 PVIN Power input supply
4 AVIN Analog input supply
5 EN Enable input
6 SS/TR Soft-start / tracking
7 DEF Output voltage default select
8 FSW Frequency select
9 VOS Output voltage sense
10 FB Feedback input
11 AGND Analog ground
12-16 PG/NC Power good / No connect
Application Scenarios: In which products and applications is TPS62130RGTR used
  • 12V to 1.2V POL converter for FPGA core at 3A with 2.5MHz enabling 2.2uH inductor
  • Single-cell Li-ion to 3.3V portable device supply with 17uA Power Save Mode IQ
  • Server microserver 12V to 1.0V VRM with Power Good for sequencing
  • SSD 5V to 1.8V buck converter with 100% duty cycle mode for 5V bypass
Alternative Models: What chips are recommended as replacements for TPS62130RGTR
Model Manufacturer Key Difference
TPS62130ARGTR TI A-version, improved PG threshold
TPS62140RGTR TI Pin-compatible, 1A output
TPS62150RGTR TI Pin-compatible, 1A, 17V input
TPS82130SILR TI Integrated inductor module

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1