Product Overview
The TPS62290TDRVRQ1 from Texas Instruments is an AEC-Q100 qualified, 2.25-6V input, 1.5A synchronous step-down converter in a SON-6 package. Operating at 3.5 MHz, it achieves up to 95% efficiency with output voltages from 0.6 V to VDD, making it ideal for automotive point-of-load applications.
Key Specifications
| Input Voltage | 2.25 V to 6 V |
| Output Voltage | 0.6 V to VDD (adjustable) |
| Output Current | 1.5 A |
| Switching Frequency | 3.5 MHz |
| Efficiency | Up to 95% |
| Shutdown Current | 1 µA (typ) |
| Operating Temperature | -40°C to +125°C |
| AEC-Q100 | Grade 1 |
| Package | SON-6 (2.0 x 2.0 mm) |
Features
- AEC-Q100 Grade 1 qualified for automotive applications
- 3.5 MHz fixed-frequency operation with auto PFM/PWM
- Only 1 µH inductor and two ceramic capacitors required
- Power-save mode for high light-load efficiency
- 100% duty cycle for lowest dropout
Applications
- Automotive infotainment POL
- ADAS processor core supply
- Automotive Infotainment POL: Converting 3.3 V or 5 V rail to 1.2 V or 1.8 V core supply for infotainment SoC
- ADAS Processor Power: High-efficiency step-down from 3.3 V to processor core voltage in ADAS camera and radar modules
- Automotive Camera Module: Compact POL regulator for image sensor and ISP in surround-view camera systems
- Car Battery Systems: Step-down from 5 V regulated rail for MCU and peripheral supply in body electronics
- Industrial 5V Systems: General-purpose POL from 5 V rail in industrial control and automation
Product Introduction: TPS62290TDRVRQ1 Product Introduction
The TPS62290TDRVRQ1 from Texas Instruments is an automotive-grade synchronous step-down DC-DC converter in an ultra-compact 2 mm x 2 mm SON-6 package. AEC-Q100 Grade 1 qualified, it operates from a 2.25 V to 6 V input and delivers up to 1.5 A output current with adjustable output voltage from 0.6 V to VDD. The 3.5 MHz fixed switching frequency allows the use of a tiny 1 µH chip inductor and small ceramic capacitors, minimizing solution footprint. The device automatically transitions between PWM mode for heavy loads and PFM (power-save) mode for light loads, maintaining high efficiency across the full load range. The 100% duty cycle mode enables the lowest possible dropout voltage when the input approaches the output. The 1 µA shutdown current preserves battery life in always-on automotive systems.
Working Principle: TPS62290TDRVRQ1 Working Principle
The TPS62290TDRVRQ1 is a current-mode synchronous buck converter with integrated N-channel MOSFET switches. At moderate to heavy loads, the device operates in fixed-frequency PWM mode at 3.5 MHz, where the peak inductor current is controlled cycle-by-cycle through the error amplifier output. At light loads, the device enters power-save mode (PFM), where switching pulses are generated only when the output voltage drops below the threshold, skipping pulses to minimize switching losses and maintain high efficiency. The transition between modes is automatic and seamless. The 100% duty cycle mode turns on the high-side switch continuously when the input voltage drops close to the output, effectively operating as a pass-through switch. The internal soft-start limits inrush current during startup. Thermal shutdown and current limit protection ensure safe operation under fault conditions.
Pin Description: TPS62290TDRVRQ1 Pin Definition and Functions
| Pin | Name | Function |
|---|---|---|
| 1 | EN | Enable input; high = enabled, low = shutdown (1 µA) |
| 2 | VIN | Input supply voltage (2.25 V to 6 V) |
| 3 | GND | Power ground and thermal pad |
| 4 | SW | Switch node; connect to inductor |
| 5 | FB | Feedback input; connect resistor divider from VOUT |
| 6 | MODE | Mode selection; high = forced PWM, low = auto PFM/PWM |
Application Scenarios: In which products and applications is TPS62290TDRVRQ1 used
Alternative Models: What chips are recommended as replacements for TPS62290TDRVRQ1
| Model | Manufacturer | VIN | IOUT | Fsw | Package | Notes |
|---|---|---|---|---|---|---|
| TPS62290TDRVR | TI | 2.25-6 V | 1.5 A | 3.5 MHz | SON-6 | Non-auto version |
| TPS62260TDRVRQ1 | TI | 2-6 V | 1 A | 3.5 MHz | SON-6 | Lower current, auto |
| BD70522GUL-E2 | Rohm | 2.5-5.5 V | 0.5 A | 3 MHz | VCSP-8 | Lower IOUT, non-auto |
| MAX38640AENT+T | ADI | 1.8-5.5 V | 0.5 A | N/A | WLP-6 | NanoPower, lower I |
| LMR10515YMFE/NOPB | TI | 3-5.5 V | 1.5 A | 3 MHz | SOT-23-5 | Non-auto, larger pkg |
Recommend Parts

TMP275AIDR
0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC
Brand: TI
Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)
IN STOCK: 3681pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFS4227TRLPBF
IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)
Brand: infineon
Package: D2PAK (TO-263)
IN STOCK: 4334pcs
Cargo cycle: 3-7 Days
The minimum order is 1

CD4070BM96
Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14
Brand: TI
Package: SOIC-14 (8.75 x 3.9 x 1.5mm)
IN STOCK: 4245pcs
Cargo cycle: 3-7 Days
The minimum order is 1

LP2980IM5-5.0
50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)
IN STOCK: 2557pcs
Cargo cycle: 3-7 Days
The minimum order is 1








