Opens in a new tab

TPS62590DRVR

1A synchronous buck, 2.5-5.5Vin, 0.75V-Vout, 2.25MHz, 15μA IQ, WSON-6

7456

Effective Inventory

Image for reference only

Manufacturer Part:

TPS62590DRVR

Package:

WSON-6 (2 x 2 x 0.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS62590DRVR from Texas Instruments is a 1A synchronous step-down converter operating at 2.25MHz fixed switching frequency with 2.5V to 5.5V input and adjustable 0.75V to VIN output. With 15μA quiescent current in power-save mode, it is optimized for battery-powered portable applications in a 2x2mm WSON-6 package.

Key Specifications

Input Voltage Range 2.5V to 5.5V
Output Voltage Range 0.75V to VIN (adjustable)
Maximum Output Current 1 A
Switching Frequency 2.25 MHz (fixed)
Quiescent Current 15 μA (PFM mode)
Output Voltage Accuracy ±2.5% (PWM mode)
Reference Voltage 600 mV
Package WSON-6 (2 x 2 mm)
Operating Temperature -40°C to +85°C

Features

  • 1A output current from single Li-Ion or 2-3 cell AA/AAA batteries
  • 2.25MHz fixed switching frequency enables small inductor and capacitor values
  • Power-save mode with 15μA quiescent current for high light-load efficiency
  • Forced PWM mode via MODE pin for low-noise applications
  • 100% duty cycle for lowest dropout operation
  • Integrated soft-start and less than 1μA shutdown current

Applications

  • Mobile phone and smartphone power management
  • Portable and wearable electronics
  • Low-power DSP and processor supply rails
  • Point-of-load conversion in battery-powered systems
  • WLAN and Bluetooth module power supplies
Product Introduction: TPS62590DRVR Product Introduction

The TPS62590DRVR is a high-efficiency synchronous step-down converter from Texas Instruments optimized for battery-powered portable applications. Operating from a 2.5V to 5.5V input, it provides up to 1A output current with an adjustable output voltage from 0.75V to VIN using external feedback resistors. The 2.25MHz fixed switching frequency allows the use of small external inductors and capacitors, minimizing solution size. In power-save mode, the quiescent current is only 15μA, maintaining high efficiency at light loads. For noise-sensitive applications, the MODE pin can force continuous PWM operation. The device features 100% duty cycle capability for lowest dropout, integrated soft-start, and less than 1μA shutdown current.

Working Principle: TPS62590DRVR Working Principle

The TPS62590 operates as a voltage-mode synchronous buck converter. (1) The control loop uses voltage-mode PWM control where the error amplifier compares the FB pin voltage (set by the external resistor divider) against the 600mV internal reference. The resulting error signal controls the duty cycle of the integrated high-side and low-side MOSFET switches operating at the fixed 2.25MHz frequency. (2) The power stage consists of integrated N-channel MOSFET switches with synchronous rectification on the low side for high efficiency. The internal soft-start circuit ramps the output voltage gradually to limit inrush current during startup. (3) The mode control selects between power-save mode (PFM) where switching pulses are skipped at light loads to reduce quiescent current to 15μA, and forced PWM mode where continuous switching maintains constant frequency for noise-sensitive loads.

Pin Description: TPS62590DRVR Pin Definition and Functions
Pin Name Function
1 EN Enable input (active high)
2 VIN Input supply voltage (2.5-5.5V)
3 SW Switch node (inductor connection)
4 GND Ground (and thermal pad)
5 FB Voltage feedback input (600mV ref)
6 MODE Mode selection (PFM/PWM)
Application Scenarios: In which products and applications is TPS62590DRVR used
  • Single-cell Li-Ion to 1.2V/1.5V core voltage conversion in smartphones
  • Portable instrument point-of-load supplies with battery-saving PFM mode
  • WLAN and Bluetooth module 3.3V or 1.8V power rails
  • Wearable device power management with 15μA light-load current
  • Low-power DSP and microcontroller core supply generation
Alternative Models: What chips are recommended as replacements for TPS62590DRVR
Model Manufacturer Key Difference
TPS62590DRVT TI Small T&R packaging option
TPS62290DRVR TI Improved features set, same footprint
TPS62743YFPR TI 360nA IQ, 300mA, BGA-6
MAX38640A Maxim 330nA IQ, 500mA, WLP-6
SY8089AAC Silergy 2A, 1.5MHz, SOT-23-5

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1