Opens in a new tab

TPS62842DGR

Buck Converter, 60nA Iq, 1.8-6.5V, 750mA, VSSOP-8

3456

Effective Inventory

Image for reference only

Manufacturer Part:

TPS62842DGR

Package:

VSSOP-8 (3.0 x 3.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS62842DGR from Texas Instruments is a 60nA ultra-low Iq buck converter with 1.8-6.5V input, 750mA output, and DCS-Control in a VSSOP-8 package.

Key Specifications

Type Ultra-Low Iq Step-Down DC-DC Converter
Input Voltage 1.8 V to 6.5 V
Output Voltage Adjustable (0.8V to VIN)
Output Current 750 mA
Quiescent Current (Iq) 60 nA (typical, standby)
Switching Frequency 1.8 MHz (typical)
Control Mode DCS-Control
Efficiency Up to 90%
Package VSSOP-8 (3.0 x 3.0 mm)
Operating Temperature -40C to +125C

Features

  • 60 nA ultra-low quiescent current
  • 1.8V to 6.5V wide input range
  • 750mA output current
  • DCS-Control for fast transient response
  • 1.8 MHz fixed switching frequency
  • Enable pin for shutdown control
  • Power good output

Applications

  • Battery-powered IoT devices
  • Energy harvesting systems
  • Always-on power rails
  • Wearable electronics
Product Introduction: TPS62842DGR Product Introduction

The TPS62842DGR from Texas Instruments is an ultra-low quiescent current step-down DC-DC converter designed for battery-powered applications that spend most of their time in sleep mode. The 60 nA quiescent current in standby mode is among the lowest in the industry, extending battery life by months or years in always-on systems. The device supports input voltages from 1.8V to 6.5V (covering single-cell Li-ion and 2-4 cell alkaline), with output current up to 750mA for peak processing loads. The DCS-Control (Direct Control with Seamless transition) architecture provides fast transient response with seamless transition between PWM and PFM modes. The 1.8 MHz switching frequency minimizes inductor size. The VSSOP-8 package provides a compact footprint suitable for space-constrained wearable and IoT designs.

Working Principle: TPS62842DGR Working Principle

The TPS62842DGR uses TI’s DCS-Control architecture, which combines voltage-mode control with a direct feedback path for fast transient response. In PWM mode (medium to heavy loads), the converter operates at a fixed 1.8 MHz frequency with pulse-width modulation for low output ripple. In light-load conditions, the converter transitions seamlessly to PFM (Pulse Frequency Modulation) mode, where switching pulses are issued only when the output voltage drops below the threshold, minimizing switching losses. In deep sleep mode (output current near zero), the 60 nA Iq is achieved by shutting down all non-essential internal circuits while maintaining the output voltage regulation through infrequent single pulses. The DCS-Control uses the output voltage ripple as a natural ramp for the comparator, eliminating the need for external compensation and providing a direct path from output to the PWM comparator for sub-microsecond transient response. The integrated synchronous rectifier replaces the external Schottky diode, improving efficiency especially at low output voltages.

Pin Description: TPS62842DGR Pin Definition and Functions
Pin Name Type Function
1 EN Input Enable (HIGH=on, LOW=shutdown)
2 VIN Power Input supply (1.8-6.5V)
3 SW Output Switch node (inductor connection)
4 GND Power Ground
5 FB Input Feedback voltage (0.6V reference)
6 PG Output Power good indicator
7 MODE Input Mode selection (PFM/Force-PWM)
8 VOS Output Output voltage sense (DCS-Control)
Application Scenarios: In which products and applications is TPS62842DGR used
  • IoT sensor node with 10-year coin cell life using 60nA standby current
  • Energy harvesting system with 1.8V minimum input from solar cell
  • Wearable health monitor with Li-po battery and always-on 1.8V rail
  • Smart meter with decade-long battery life requirement and 750mA peak load
Alternative Models: What chips are recommended as replacements for TPS62842DGR
Manufacturer Part Number Package Notes
TI TPS62840DGR VSSOP-8 60V input, 300mA, ultra-low Iq
TI TPS62843DGR VSSOP-8 Fixed output version, 60nA Iq
ADI LT8609IMSE TSSOP-16 42V, 2A, 2.5uA Iq (higher)
Richtek RT9069GQW DFN-8 5.5V, 300mA, 1uA Iq
Monolithic Power MP28167GD-0000 QFN-8 6V, 600mA, low Iq

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1