Opens in a new tab

Home » Integrated Circuits ICs » TPS63000DRCR

TPS63000DRCR

TI buck-boost converter, 1.8-5.5V in, 1.2-5.5V out, 1.8A, 96% eff, VSON-10

8691

Effective Inventory

Image for reference only

Manufacturer Part:

TPS63000DRCR

Package:

VSON-10 (DRC), 3.0 x 3.0 mm with PowerPAD

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS63000DRCR is a high-efficiency single-inductor buck-boost converter from Texas Instruments. With 1.8A switch current, 1.8V to 5.5V input range, and adjustable output from 1.2V to 5.5V, this converter provides up to 96% efficiency in a compact 3 x 3 mm VSON-10 package. It automatically transitions between step-down and boost modes, making it ideal for battery-powered applications.

Key Specifications

Series TPS63000
Topology Buck-Boost (Single Inductor)
Input Voltage Range 1.8V to 5.5V
Output Voltage Range 1.2V to 5.5V (adjustable)
Switch Current Limit 1.8A (typical)
Output Current (Buck, 3.3V) 1200 mA at VIN = 3.6-5.5V
Output Current (Boost, 3.3V) 800 mA at VIN > 2.4V
Efficiency Up to 96%
Quiescent Current less than 50 uA
Switching Frequency 2.4 MHz (typical)
Package VSON-10 (DRC), 3.0 x 3.0 mm
Operating Temperature -40C to +85C
Power-Save Mode Yes (can be disabled)
Load Disconnect Yes (during shutdown)

Features

  • Single-inductor topology reduces BOM cost and footprint
  • Automatic buck/boost mode transition for seamless regulation
  • Up to 96% efficiency across load range
  • Power-save mode for high light-load efficiency
  • Forced PWM mode option for noise-sensitive applications
  • Load disconnect during shutdown minimizes battery drain
  • Over-temperature and short-circuit protection
  • Compact 3 x 3 mm VSON-10 package with PowerPAD

Applications

  • Single-cell Li-ion/Li-Po battery-powered devices
  • Portable audio players and smartphones
  • USB power bank output regulation
  • White LED drivers
  • Personal medical devices
Product Introduction: TPS63000DRCR Product Introduction

The Texas Instruments TPS63000DRCR is a high-efficiency single-inductor buck-boost converter with 1.8A switch current rating. Operating from a 1.8V to 5.5V input, it produces an adjustable output from 1.2V to 5.5V, automatically transitioning between buck and boost modes as the input voltage varies relative to the output. This makes it ideal for single-cell Li-ion battery applications where the battery voltage (2.5-4.2V) can be above or below the desired output. With up to 96% efficiency, less than 50 uA quiescent current, and a compact 3 x 3 mm VSON-10 package, the TPS63000DRCR is optimized for space-constrained portable applications.

Working Principle: TPS63000DRCR Working Principle

The TPS63000DRCR uses a single-inductor, 4-switch buck-boost topology with synchronous rectification. In buck mode (VIN > VOUT), high-side switch S1 and low-side synchronous switch S2 operate as a standard buck converter while boost switches remain in pass-through. In boost mode (VIN < VOUT), S3 and S4 operate as a boost converter while S1/S2 remain on. In buck-boost mode (VIN approximately equals VOUT), all four switches operate to maintain regulation. The device uses fixed-frequency PWM control at 2.4 MHz, and at light loads enters power-save mode (PFM) to maintain high efficiency. The PS/SYNC pin can force continuous PWM operation for noise-sensitive applications. During shutdown (EN = LOW), the load is completely disconnected from the input.

Pin Description: TPS63000DRCR Pin Definition and Functions
Pin Name Type Function
1 VOUT Output Converter output voltage
2 L2 Input Inductor connection (boost side)
3 PGND Ground Power ground
4 L1 Input Inductor connection (buck side)
5 VIN Power Input supply for power stage
6 EN Input Enable (1 = on, 0 = shutdown)
7 PS/SYNC Input Power-save disable / sync clock input
8 VINA Power Input supply for control stage
9 GND Ground Control ground
10 FB Input Voltage feedback (connect resistor divider to VOUT)
Pad PowerPAD Ground Thermal pad, connect to PGND
Application Scenarios: In which products and applications is TPS63000DRCR used
  • 3.3V rail from single-cell Li-ion (2.5-4.2V) in portable devices
  • USB power bank 5V output from 3.7V Li-ion
  • White LED driver with constant current buck-boost regulation
  • Portable medical device 3.3V supply from 2-cell AA batteries
  • Wearable device power management with variable battery voltage
Alternative Models: What chips are recommended as replacements for TPS63000DRCR
Manufacturer Part Number Package Notes
TI TPS63001DRCR VSON-10 3.3V fixed output variant
TI TPS63020DRCR VSON-10 Higher current (4A) buck-boost
Monolithic Power MP3414 QFN-12 Comparable 2A buck-boost
Richtek RT6156B-33GQW WDFN-10 3.3V buck-boost alternative

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1