Opens in a new tab

TPS63710DRRR

Inverting buck, 3.1-14V in, -1 to -5.5V out, 1A, 1.5MHz, WSON-12

3300

Effective Inventory

Image for reference only

Manufacturer Part:

TPS63710DRRR

Package:

WSON-12 (3.0×3.0×0.8 mm, 0.5mm pitch, PowerPAD)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS63710DRRR from Texas Instruments is a low-noise synchronous inverting buck converter that generates a negative output voltage down to -5.5V from a 3.1V to 14V positive input. With up to 1A output current, fixed 1.5 MHz switching frequency, and filtered reference system for low 1/f noise, it is designed for negative-rail power supplies in telecom, optical, and precision analog applications. Packaged in a 3×3 mm WSON-12 with PowerPAD.

Key Specifications

Topology Inverting Buck (positive to negative)
Input Voltage Range 3.1V to 14V
Output Voltage Range -1V to -5.5V (adjustable)
Output Current 1A (depending on VIN/VOUT ratio)
Switching Frequency 1.5 MHz (fixed)
Efficiency Up to 91%
Output Voltage Accuracy ±1.5%
Output Noise 22 µVRMS (10 Hz to 100 kHz)
Quiescent Current 15 mA (operating)
Shutdown Current 5 µA
Operating Temperature -40°C to +125°C (junction)
Package WSON-12 (3×3 mm) with PowerPAD

Features

  • Generates negative output from positive input: -1V to -5.5V
  • Synchronous rectification for high efficiency
  • Filtered reference system for ultra-low 1/f noise (22 µVRMS)
  • 1.5 MHz fixed frequency for compact external components
  • Adjustable output with ±1.5% accuracy
  • Internal soft-start and enable control
  • Thermal shutdown and current limit protection
  • 3×3 mm WSON package with PowerPAD for thermal performance

Applications

  • Negative supply for precision ADCs and DACs
  • GaN transistor gate bias voltage
  • Optical module laser diode bias
  • Telecom system negative rail generation
  • Operational amplifier dual-supply negative rail
Product Introduction: TPS63710DRRR Product Introduction

The TPS63710DRRR from Texas Instruments is a low-noise synchronous inverting buck converter generating -1V to -5.5V from a 3.1-14V positive input at up to 1A. Its filtered reference system achieves 22 µVRMS output noise (10 Hz-100 kHz), making it ideal for negative-rail supplies in precision ADCs/DACs, GaN bias, and optical modules. The 1.5 MHz fixed frequency and 3×3 mm WSON-12 package enable compact, low-noise negative-rail solutions.

Working Principle: TPS63710DRRR Working Principle

The TPS63710DRRR uses an inverting buck topology to generate a negative output voltage from a positive input. During the on-time, the high-side switch connects the inductor to VIN, storing energy in the inductor. During the off-time, the synchronous rectifier (low-side switch) connects the inductor to the negative output, transferring energy to the output capacitor and load. The output voltage is regulated by comparing the FB pin (connected to a resistor divider from VOUT to GND) with an internal reference. The filtered reference system reduces 1/f noise at the output. The constraint |VOUT| < 0.7 × VIN must be satisfied for proper regulation. The 1.5 MHz switching frequency allows small inductor and capacitor values, while the integrated synchronous rectifier eliminates the need for an external catch diode.

Pin Description: TPS63710DRRR Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (3.1-14V)
2 SW Output Switch node (connect to inductor)
3,4 PGND Power Power ground
5 EN Input Enable (HIGH=on, LOW=shutdown)
6 FB Input Feedback (connect to VOUT divider)
7 VREF Output Filtered reference output (bypass with cap)
8 CCAP I/O Reference filter capacitor
9 PG Output Power good (open-drain)
10 CP I/O Charge pump capacitor
11 CAUX I/O Auxiliary capacitor
12 VAUX Output Auxiliary voltage output
Pad PowerPAD Power Thermal pad (connect to PGND)
Application Scenarios: In which products and applications is TPS63710DRRR used
  • Negative supply for precision ADCs and DACs (e.g., -2.5V, -5V)
  • GaN transistor gate bias voltage generation
  • Optical module laser diode bias supply
  • Telecom system negative rail from positive bus
  • Operational amplifier dual-supply negative rail from single positive source
Alternative Models: What chips are recommended as replacements for TPS63710DRRR
Manufacturer Part Number Package Notes
TI LM27761DSGR WSON-8 Charge pump inverter, 250mA, lower noise
TI TPS63700DDCR SOT-23-6 -15V out, lower current (360mA)
ADI ADP5070ACPZ LFCSP-20 Dual output (positive+negative), higher current
TI TPS63710DRRT WSON-12 Same IC, tray packaging
Monolithic Power MP28167GQW-Z QFN-14 Inverting buck-boost, 6A

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1