Opens in a new tab

TPS650250RHB

PMIC with 3 DC/DC (1.6A+0.8A+0.8A) and 3 LDO, Li-Ion powered, VQFN-32

14066

Effective Inventory

Image for reference only

Manufacturer Part:

TPS650250RHB

Package:

VQFN-32 (RHB) (5 x 5 x 0.9 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS650250RHB from Texas Instruments is an integrated Power Management IC (PMIC) designed for Li-Ion or Li-Polymer battery-powered systems requiring multiple power rails. It features three high-efficiency step-down (buck) converters (1.6A, 0.8A, 0.8A), a 30mA LDO for always-on rail, and two 200mA general-purpose LDOs. The device operates from a single Li-Ion cell (2.5-6V input) and provides configurable output voltages through external resistor dividers. The 2.25MHz switching frequency allows use of small external inductors.

Key Specifications

Input Voltage 2.5V to 6V (Li-Ion battery)
DCDC1 Output 1.6A, up to 97% efficiency, 3.3V/2.8V/adjustable
DCDC2 Output 0.8A, up to 95% efficiency, 1.8V/2.5V/adjustable
DCDC3 Output 0.8A, up to 90% efficiency, adjustable (core voltage)
LDO1/LDO2 2x 200mA, 1.5V to 6.5V input, adjustable
Vdd_alive LDO 30mA, always-on
Switching Frequency 2.25MHz
Quiescent Current 85uA
Operating Temperature -40 to 85°C
Package VQFN-32 (RHB), 5x5mm

Features

  • Three high-efficiency step-down converters with power-save mode at light loads
  • Dynamic voltage management for processor core (DCDC3)
  • Forced PWM mode via MODE pin for low-noise operation
  • Individual enable pins for each converter
  • 30mA always-on LDO (Vdd_alive) for backup/RTC power
  • Two 200mA general-purpose LDOs with adjustable output
  • PWRFAIL detection and output
  • Thermal shutdown protection

Applications

  • Portable electronics powered by single Li-Ion cell
  • Smartphones and mobile computing devices
  • Digital still cameras and camcorders
  • Handheld GPS and navigation systems
  • Processor-based systems requiring multiple power rails
Product Introduction: TPS650250RHB Product Introduction

The TPS650250RHB is a highly integrated power management IC from Texas Instruments designed for single-cell Li-Ion or Li-Polymer battery applications. It combines three high-efficiency step-down converters with three LDO regulators in a single 32-pin VQFN package, providing all necessary power rails for a processor-based system. The DCDC1 converter delivers up to 1.6A for system I/O voltage, while DCDC2 and DCDC3 provide 0.8A each for memory and processor core voltages respectively. All three converters feature automatic power-save mode at light loads for maximum efficiency across the entire load range. The device supports dynamic voltage scaling on DCDC3 for processor power optimization.

Working Principle: TPS650250RHB Working Principle

The TPS650250 operates from a single Li-Ion cell input (2.5-6V) and generates multiple regulated output rails. Each step-down converter uses a synchronous rectification buck topology with integrated power MOSFETs, operating at a fixed 2.25MHz switching frequency. In PFM mode (MODE pin low), the converters enter power-save mode at light loads, skipping pulses to maintain efficiency. In forced PWM mode (MODE pin high), all converters operate at fixed frequency for lowest output voltage ripple. The DCDC3 output supports dynamic voltage management through an external resistor divider, allowing real-time core voltage adjustment. The two 200mA LDOs use PMOS pass transistors for low dropout and can be powered from any DCDC output. The 30mA Vdd_alive LDO remains active in all power states. The PWRFAIL comparator monitors the battery voltage and provides an early warning output.

Pin Description: TPS650250RHB Pin Definition and Functions
Pin Name Type Function
1 VBAT Power Battery input for DCDC1
2 VINDCDC1 Power DCDC1 input supply
3 VDCDC1 Output DCDC1 output (SW)
4-6 DEFDCDC1/2/3 Input Output voltage select for DCDC1/2/3
7-9 EN_DCDC1/2/3 Input Enable for each DCDC converter
10-15 DCDC2/3 pins Mixed DCDC2 and DCDC3 VIN/SW/feedback
16-18 LDO pins Mixed LDO input/output/feedback
19 VDD_ALIVE Output 30mA always-on LDO output
20 MODE Input PWM/PFM mode select
21 PWRFAIL_SNS Input Power fail threshold sense
22 PWRFAIL Output Power fail indicator
23-32 GND/VCC/NC Mixed Ground, VCC reference, no-connect
Application Scenarios: In which products and applications is TPS650250RHB used
  • Single-cell Li-Ion powered portable electronics requiring multi-rail power
  • Smartphones and tablets with ARM-based application processors
  • Digital cameras and camcorders with multiple voltage domains
  • Handheld GPS devices and portable navigation systems
  • Processor-based embedded systems requiring dynamic voltage scaling
Alternative Models: What chips are recommended as replacements for TPS650250RHB
Manufacturer Part Number Package Notes
TI TPS650242RHBR VQFN-32 Similar PMIC, different voltage options
TI TPS650250RHBR VQFN-32 Tape and reel version of same device
TI TPS65217C TQFP-48 PMIC for OMAP/AM335x processors
Richtek RT5036 WQFN-42 Multi-rail PMIC for smartphones
Dialog DA9063 QFN-82 Highly configurable PMIC for ARM SoCs

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1