Opens in a new tab

TPS70933DBVR

150mA LDO, 3.3V fixed, 1uA Iq, 50V max input, SOT-23-5, reverse current blocking

5198

Effective Inventory

Image for reference only

Manufacturer Part:

TPS70933DBVR

Package:

SOT-23-5 (2.90 x 1.60 x 1.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS70933DBVR from Texas Instruments is a 150mA ultra-low Iq LDO regulator with 3.3V fixed output in a SOT-23-5 package. With 1uA quiescent current and 50V input rating, it targets always-on battery-powered IoT and wearable applications.

Key Specifications

Output Voltage 3.3 V (fixed)
Output Current 150 mA
Input Voltage 2.7 V to 50 V
Dropout Voltage 710 mV (at 150mA)
Quiescent Current 1 uA (typical)
PSRR 68 dB (at 100Hz)
Operating Temperature -40C to +125C

Features

  • 1uA ultra-low quiescent current for always-on battery systems
  • 50V maximum input voltage for industrial supply rails
  • 3.3V fixed output with 2% accuracy
  • 68dB PSRR for clean output regulation
  • Enable pin for shutdown control
  • Reverse current blocking protection

Applications

  • IoT sensor nodes with always-on 3.3V regulation
  • Wearable and portable battery-powered devices
  • Industrial 24V/48V supply rail post-regulation
  • Smart meter and building automation power
Product Introduction: TPS70933DBVR Product Introduction

The TPS70933DBVR from Texas Instruments is a 150mA low-dropout linear regulator with a fixed 3.3V output in a SOT-23-5 package. The device features an ultra-low 1uA typical quiescent current, making it ideal for always-on battery-powered applications where standby current must be minimized. The wide 2.7V to 50V input range supports direct connection to industrial 24V or 48V supply rails without pre-regulation. Dropout voltage is 710mV at 150mA load. The device provides 68dB PSRR at 100Hz for clean output regulation. An enable pin allows the device to be shut down, reducing current consumption to below 300nA. Reverse current blocking prevents current flow from the output back to the input when the input voltage drops below the output, protecting the input supply. The SOT-23-5 package provides a tiny footprint for space-constrained designs.

Working Principle: TPS70933DBVR Working Principle

The TPS70933DBVR uses a PMOS pass transistor with ultra-low quiescent current bias. (1) Pass Element: A P-channel MOSFET pass transistor provides low dropout operation and draws zero gate current in steady state, enabling the 1uA quiescent current. The PMOS also provides reverse current blocking when VIN drops below VOUT. (2) Error Amplifier: A low-power error amplifier compares a fraction of the output voltage to an internal bandgap reference. The amplifier drives the PMOS gate to maintain regulation. The bias circuitry is optimized for microampere-level current consumption. (3) Enable: The EN pin controls the device. When EN is low, all internal circuitry is disabled and the output is discharged through an internal pull-down resistor. Quiescent current drops below 300nA in shutdown. (4) Protection: The reverse current blocking feature uses the PMOS body diode orientation to prevent current flow from output to input. Thermal shutdown and current limiting protect against fault conditions.

Pin Description: TPS70933DBVR Pin Definition and Functions
Pin Name Type Function
1 OUT Output Regulated 3.3V output
2 GND Ground Ground
3 EN Input Enable (active high, internal pull-up)
4 NC – No connect
5 IN Input Input supply (2.7-50V)
Application Scenarios: In which products and applications is TPS70933DBVR used
  • IoT sensor nodes with 1uA always-on 3.3V regulation from single-cell Li-Ion
  • Wearable and portable battery-powered devices with EN shutdown at 300nA
  • Industrial 24V/48V supply rail post-regulation with 50V max input
  • Smart meter and building automation power with reverse current blocking
Alternative Models: What chips are recommended as replacements for TPS70933DBVR
Manufacturer Part Number Package Notes
TI TPS70925DBVR SOT-23-5 2.5V output version
TI TLV71333PDBVR SOT-23-5 150mA, 5.5V max, lower Iq
Microchip MCP1811AT-033OT SOT-23-5 350mA, 1uA Iq
onsemi NCP511SN33T1G SOT-23-5 150mA LDO, 3.3V

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1