Opens in a new tab

TPS73001DBVR

200mA adj LDO, 68dB PSRR, 69uVRMS noise, 120mV Vdo, SOT-23-6

36072

Effective Inventory

Image for reference only

Manufacturer Part:

TPS73001DBVR

Package:

SOT-23-6 (2.9 x 2.8 x 1.45 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS73001DBVR from Texas Instruments is a 200mA low-dropout (LDO) linear regulator with adjustable output from 1.22V to 5.5V in a 6-pin SOT-23 package. With 68dB PSRR at 100Hz, 69uVRMS output noise, and 120mV dropout voltage at 200mA, it provides clean power for noise-sensitive RF and analog circuits.

Key Specifications

Output Current 200 mA
Output Voltage Adjustable 1.22V to 5.5V
Dropout Voltage 120 mV typical @ 200mA
PSRR 68 dB @ 100Hz
Output Noise 69 uVRMS (new chip)
Input Voltage Range 2.7V to 5.5V
Quiescent Current 170 uA typical
Accuracy +/-2%
Output Capacitor 2.2 uF ceramic
Enable Pin Yes (active high)
Operating Temperature -40 to +125 C
Package SOT-23-6

Features

  • 200mA LDO with adjustable output (1.22-5.5V)
  • 68dB high PSRR at 100Hz
  • 69uVRMS ultra-low output noise
  • 120mV low dropout at 200mA
  • 50us fast start-up time
  • Stable with 2.2uF ceramic output capacitor
  • Enable pin for power sequencing
  • Thermal shutdown and overcurrent protection

Applications

  • RF transceiver power supply
  • Low-noise analog circuits
  • Portable medical devices
  • Post-regulation for switching supplies
Product Introduction: TPS73001DBVR Product Introduction

The TPS73001DBVR from Texas Instruments is a 200mA low-noise, high-PSRR adjustable LDO regulator in a 6-pin SOT-23 package. The 01 suffix indicates the adjustable output version (1.22V to 5.5V set by external resistor divider), DBV denotes the SOT-23 package, and R indicates tape and reel. The TPS730 family uses a proprietary BiCMOS process to achieve 120mV typical dropout at 200mA, 68dB PSRR at 100Hz, and only 69uVRMS output noise. The 6-pin SOT-23 package includes a feedback (FB) pin for output voltage adjustment and an enable (EN) pin for power sequencing. The device is stable with a small 2.2uF ceramic output capacitor, making it ideal for space-constrained portable applications.

Working Principle: TPS73001DBVR Working Principle

The TPS73001 operates through four subsystems: (1) Bandgap Reference: A precision bandgap voltage reference provides 1.22V (Vref) with low noise and low temperature drift. The FB pin compares the divided output voltage against Vref to regulate the output. (2) Error Amplifier: A high-gain error amplifier compares the FB pin voltage with Vref and drives the pass transistor to maintain the output voltage. The amplifier bandwidth and compensation set the PSRR and transient response characteristics. The 68dB PSRR at 100Hz attenuates input ripple by a factor of 2500x. (3) Pass Transistor: A PMOS pass transistor provides the low 120mV dropout voltage at 200mA. The PMOS topology allows the output to be very close to the input voltage, unlike NPN LDO regulators. The 170uA quiescent current flows through the pass transistor bias circuit. (4) Protection: Overcurrent protection limits the output current to approximately 400mA. Thermal shutdown disables the output above 160C junction temperature. The EN pin allows the device to be shut down, reducing quiescent current to less than 1uA.

Pin Description: TPS73001DBVR Pin Definition and Functions
Pin Name Type Description
1 IN Power Input voltage (2.7-5.5V)
2 GND Power Ground
3 EN Input Enable (HIGH=on, LOW=shutdown)
4 NC/NR — No connect (new chip) / noise reduction (old chip)
5 FB Input Feedback voltage input (Vref=1.22V)
6 OUT Output Regulated output voltage
Application Scenarios: In which products and applications is TPS73001DBVR used
  • RF transceiver LDO with 68dB PSRR and 69uVRMS noise for clean LO and VCO supply
  • Portable medical device with 120mV low dropout at 200mA and 170uA quiescent current
  • Post-regulation after DC-DC converter with adjustable 1.22-5.5V output via resistor divider
  • Battery-powered analog front-end with EN pin for power sequencing and 1uA shutdown current
Alternative Models: What chips are recommended as replacements for TPS73001DBVR
Model Manufacturer Vout Noise Notes
TPS73033DBVR TI 3.3V fixed 69uV Fixed voltage version
TPS7A2025DBVR TI 2.5V/adj 6.5uV Newer, lower noise
LP5907MFX-3.3 TI 3.3V fixed 8.5uV Lower noise, 250mA
LT1761ES5-SD ADI Adj 20uV Higher precision

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1